OHIO CAMARO ENTHUSIASTS/OWNERS REPORT HERE

[Tantalizer43]

Any of you buttholes going to BBOMG?

[Darth_Emma]

Originally Posted by TLSTWIN

You didn't mention geometry anywhere in there, that is what is misunderstood and misinterpreted. Here is what Exactly you said.


LIKe I said before, even GM completely changed the rearend on the ZL1 for only 580HP

Not meaning to be inflamatory, just pointing out what you did say and why it got misunderstood.

I did say "design." Obviously, I don't have the OEM parts. But I think it's clear what we're talking about now. We are going to make some changes for the better.

[cntryman77]

wow, such drama in here...funny how it always follows the same people all the time

[tomster]

Originally Posted by TLSTWIN

wow, would have been nice to see this a week ago... lol

There is another date I am looking at in Sept. on the 16th with 3ballsracing for $260 I think. I found out about it at Gingerman and missed that cut off date also. lol

Here is the link
http://www.3ballsracing.com/events/e...ember-16--2013

Sorry use code

2013FB by Aug. 10th to get 10% off. -
makes it $270ish

There will be a mobile dyno there also if anyone should want to dyno there car. I don't know the cost for a run on it tho,,,

[TLSTWIN]

Originally Posted by cntryman77

wow, such drama in here...funny how it always follows the same people all the time

[SilverIceman]

Originally Posted by TLSTWIN

Not meaning to be inflamatory, just pointing out what you did say and why it got misunderstood.

Sorry T. Have to agree with M., sure sounded like you were blaming GM for your drivetrain issues.
Should have blamed the aftermarket part designers or the people running 1300 whp through them, not GM.
Over 365,000 new Camaros out there running just fine. Minus at least two.

Originally Posted by TLSTWIN

wow, would have been nice to see this a week ago... lol

There is another date I am looking at in Sept. on the 16th with 3ballsracing for $260 I think. I found out about it at Gingerman and missed that cut off date also. lol

Here is the link
http://www.3ballsracing.com/events/e...ember-16--2013

Would love to go to either, but my car's back in the shop with a busted rear end (you know, the design flaw thing).

Originally Posted by Tantalizer43

Any of you buttholes going to BBOMG?

There you go, trying to change the subject.

No, not going. Even if I had my car.
Hey, who you calling a butthole??

Originally Posted by cntryman77

wow, such drama in here...funny how it always follows the same people all the time

Yeah, but it makes for more entertaining reading.

[Darth_Emma]

Originally Posted by SilverIceman

Sorry T. Have to agree with M., sure sounded like you were blaming GM for your drivetrain issues.

What I should have said was the stock geometry (even with stronger parts) won't handle the power we are making and we need to make some changes to it. I didn't mean for this to turn into such a drama. I was just trying to look at the bright side that we now what to do next with the car to make it better.

I'm moving on to other topics now. I think we're beating a dead horse at this point.

[Jamie Mac]

Originally Posted by Darth_Emma

What I should have said was the stock geometry (even with stronger parts) won't handle the power we are making and we need to make some changes to it. I didn't mean for this to turn into such a drama. I was just trying to look at the bright side that we now what to do next with the car to make it better.

I'm moving on to other topics now. I think we're beating a dead horse at this point.

Darth, I'm curious about the geometry of the rear end and the axles breaking. I'm more familiar with people getting driveshaft issues after lifting a vehicle and it being to much angle for the u joints. In that case they have to rotate the pumpkin up. Are they thinking that the rear end needs raised or lowered in relationship to the wheel hub to straighten the axle? Where did the axles break?

[masterwinning]

I see not much has changed while I was gone.

[SilverIceman]

Originally Posted by masterwinning

I see not much has changed while I was gone.

OMG, He's BAAAAACCCK !

Where have you been? Maybe I shouldn't ask?

[masterwinning]

Life got busy, found me a wife and we are expecting a daughter. We meet up with Lisa and Zac at the Lofinos cruise in the other night and thought I would take a peek to see what has been going on.

[SilverIceman]

Originally Posted by masterwinning

Life got busy, found me a wife and we are expecting a daughter. We meet up with Lisa and Zac at the Lofinos cruise in the other night and thought I would take a peek to see what has been going on.

Ahh, the mystery folks she mentioned meeting up with.

Congrats, I mean "Double" congrats. Hopefully I'll get to one of those cruise-ins before this season is over.

[masterwinning]

It was us, better to keep it a mystery then to admit it is me and scare people off. But I have been on my best behavior and haven't been banned or suspended from anywhere in a long while.

Thanks on the congrats. If you decide you are heading out that way let us know and we will stop by, it is just down the road from us.

[TLSTWIN]

Originally Posted by SilverIceman

Would love to go to either, but my car's back in the shop with a busted rear end (you know, the design flaw thing).

LOL, that sucks

Originally Posted by masterwinning

I see not much has changed while I was gone.

Actually things had been SUPER slow in here and quiet.

The recent discussion, some call drama, just started, lol

Originally Posted by masterwinning

Life got busy, found me a wife and we are expecting a daughter. We meet up with Lisa and Zac at the Lofinos cruise in the other night and thought I would take a peek to see what has been going on.

Congrats on both