11-01-2015, 11:10 AM | #1 |
How we remove this thing!!!!!
Hi guys! I'm totally new to this forum and I'm also a totally new owner of Camaro 2010 SS!!! I have many questions and one of them is how to remove the bezel ON the airbag that is not in a "good" condition?????
Yes the silver circle in the middle of airbag....:ion: Thank you in advance for any help!!!! |
|
11-02-2015, 06:08 AM | #2 |
Master of All Things
Drives: '20 Corvette Stingray Join Date: Jul 2009
Location: Southeast of Houston, Texas
Posts: 22,331
|
CONGRATS on your ride and Welcome to our happy little corner of the net, and to Camaro5. There is a BIG fridge on the back porch with anything you can think of in it...help yourself...of course only take what you can LEGALLY have. Make yourself at home on one of the big fluffy couches, kick your shoes off, put your feet up on one of the tables, yes we are allowed to do that, mom's, dad's, wives', husband's, girlfriend's and boyfriend's here don't care....and take it easy.
oh...btw....every once in a while a food fight breaks out...so you may not want to wear nice clothes here. Welcome!!
__________________
|
11-03-2015, 06:57 AM | #3 |
No one ???? Is that so difficult????
|
|
11-03-2015, 07:08 AM | #4 |
Older Than Dirt
Drives: 2010 & 2013 Camaros Join Date: Apr 2010
Location: Aiken, SC
Posts: 4,565
|
It's not difficult if you use a chainsaw.
If you're talking about how to get the airbag off, there's two clips you have to push in located on the sides. On either side of the steering wheel at the base of the center cap you should see two small holes. You can use a small screwdriver to push in the retainers. the center cap should pop off then. Be careful of the air bag clips and make sure to de-energize the air bag system for at least 15 minutes by pulling the battery cable. As for the chrome ring itself, if that's what you're talking about, I think it's part of the cover. Probably not easily removed if it can be at all. My guess is it's glued/fused on. Good luck.
__________________
2010 2SS TE, 1 of 822/2013 Camaro ZL1 vert, 1 of 54
|
11-03-2015, 10:19 AM | #5 |
Drives: 2010 SS/RS Supercharged 427 Build Join Date: Nov 2010
Location: Michigan
Posts: 5,504
|
Welcome to the forum!
|
11-03-2015, 06:12 PM | #6 |
Drives: 2LS 2014 Join Date: Oct 2013
Location: Staten ISland
Posts: 3,404
|
WELCOME!!
__________________
|
11-04-2015, 06:48 AM | #7 | |
Quote:
|
||
11-07-2015, 05:38 AM | #8 |
Drives: 2011 Camaro 2LT/RS Join Date: May 2015
Location: Farmville, Virginia
Posts: 1,022
|
the ring is part of the airbag cover. not shown as being removable. mine was scratched up by the previous owner, so I researched replacement.
__________________
|
11-07-2015, 06:42 AM | #9 | |
Buick 455 Fan
Drives: 1970 Buick, 2012 1SS LS3 Join Date: Jun 2010
Location: Boston MA
Posts: 5,957
|
Quote:
Do you want to end up with no chrome ring on your steering wheel, or do you want to take the chrome ring off one airbag and install it on another?
__________________
|
|
01-26-2016, 04:04 AM | #10 |
01-26-2016, 07:47 AM | #11 |
Drives: 2016 Camaro 2SS, Nightfall Grey Join Date: Nov 2012
Location: Sulphur La.
Posts: 1,680
|
Welcome aboard
|
01-27-2016, 08:26 AM | #12 |
Drives: early 2011 Camaro convertible Join Date: Jul 2014
Location: House Springs, Mo
Posts: 2,002
|
welcome good luck in your steering wheel mod
__________________
Early 2011 LT Convertible, ZL1 bumper, hood, side skirts, belly pan and wheels, Truecarbon ECF hood extractor, K&N CAI, Elite catch can, Big Worm Bow Tie emblems, Jacfab bracket, Vitesse TC, BMR strut brace, BMR tunnel brace, NPP exhaust |
|
|
|
|