EBC squeaking brakes - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

morepowerjoe · 12-18-2020, 10:25 AM

So I got EBC*brakes*a few months ago. They where kits (EBC-S12KF1445) and (EBC-S12KR1307) they are the high carbon disc with red stuff pads. when I got them they said that you didn't have to bed them in because they have a break in material on the pads. So here I am about a thousand miles later and when they get hot they squeal like hell on every stop at low speeds like at a stop light. I called Summitt where I purchased them and they got EBC to send me new pads for the front and I told them that I bought the rear kits as well and don't know if the rears are*squeaking*also. So they told me to bed the front ones in and if they still squeak send them a video and they will warranty the rears as well.
Also EBC sent me a big long form on how to bed them in which weren't with the kits when I first got them. I just hate to go through all this again and have the same problem.
I just don't think that $600*brakes*should squeak. What are yalls thoughts on this?

12-18-2020, 10:25 AM	#1
morepowerjoe Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020 Location: Austin, TX Posts: 2,105	EBC squeaking brakes So I got EBCbrakesa few months ago. They where kits (EBC-S12KF1445) and (EBC-S12KR1307) they are the high carbon disc with red stuff pads. when I got them they said that you didn't have to bed them in because they have a break in material on the pads. So here I am about a thousand miles later and when they get hot they squeal like hell on every stop at low speeds like at a stop light. I called Summitt where I purchased them and they got EBC to send me new pads for the front and I told them that I bought the rear kits as well and don't know if the rears aresqueakingalso. So they told me to bed the front ones in and if they still squeak send them a video and they will warranty the rears as well. Also EBC sent me a big long form on how to bed them in which weren't with the kits when I first got them. I just hate to go through all this again and have the same problem. I just don't think that $600brakesshould squeak. What are yalls thoughts on this? __________________ DSS FX Forged Pistons, Eagle ESP L19 Forged Rods, ARP Head and Main Studs, TSP PRC 260 CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Performance Racing Lifters, CHE Trunnions , Molly Pushrods, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP 1 7/8" Longtubes with 3" TSP Exhaust, ZL1 Fuel Pump, Mishimoto Radiator, Mishimoto Oil Cooler, Tru Cool 40k Tranny Cooler, 3600 Circle D Converter, Fluid Dynamics Balancer Build Thread https://www.camaro5.com/forums/showthread.php?t=609817