05-18-2021, 03:48 PM | #1 |
Drives: Whipple'd Mustang S550 Join Date: Jun 2014
Location: Kansas
Posts: 71
|
WTB: Whipple 6-rib 3.875+3.750" Pulleys
Looking for a couple pulleys, 3.875+3.750", used or new, 6 rib.
Thank You!
__________________
'17 Whipple'd S550 Mustang, Stage 1 (750hp) kit, all stock otherwise less M/T ET Street Radials/VMS Rear Drag Pack Only. 643 RWHP (dynojet). 10.92@128, 1.59 60' (2800 ft corrected D/A). 91 Octane+Boostane Octane Booster.
Many other turbo LS/Ford Builds to date, see my YouTube channel YouTube Channel: https://www.youtube.com/channel/UCr7..._as=subscriber |
05-18-2021, 05:51 PM | #2 |
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 826
|
I have a 3.875 I'm not using.
Sent from my Pixel 5 using Tapatalk
__________________
830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.
|
05-18-2021, 09:06 PM | #3 |
Drives: Whipple'd Mustang S550 Join Date: Jun 2014
Location: Kansas
Posts: 71
|
Message sent!
__________________
'17 Whipple'd S550 Mustang, Stage 1 (750hp) kit, all stock otherwise less M/T ET Street Radials/VMS Rear Drag Pack Only. 643 RWHP (dynojet). 10.92@128, 1.59 60' (2800 ft corrected D/A). 91 Octane+Boostane Octane Booster.
Many other turbo LS/Ford Builds to date, see my YouTube channel YouTube Channel: https://www.youtube.com/channel/UCr7..._as=subscriber |
05-20-2021, 07:56 AM | #4 |
Drives: Whipple'd Mustang S550 Join Date: Jun 2014
Location: Kansas
Posts: 71
|
Still looking for a 3.750", thank you for the 3.875 Larry!
__________________
'17 Whipple'd S550 Mustang, Stage 1 (750hp) kit, all stock otherwise less M/T ET Street Radials/VMS Rear Drag Pack Only. 643 RWHP (dynojet). 10.92@128, 1.59 60' (2800 ft corrected D/A). 91 Octane+Boostane Octane Booster.
Many other turbo LS/Ford Builds to date, see my YouTube channel YouTube Channel: https://www.youtube.com/channel/UCr7..._as=subscriber |
06-15-2021, 05:57 PM | #5 |
|
If you're still looking, I have a 6-rib 3.75" w/Grip-Tec treatment. It is an original Whipple pulley that I sent out for the Grip-Tec treatment. Incidentally, I also have a 3.0" 6-rib pulley, but this one is made by Grip-Tec.
Let me know. -Scott |
06-30-2021, 02:37 PM | #6 | |
Drives: Whipple'd Mustang S550 Join Date: Jun 2014
Location: Kansas
Posts: 71
|
Quote:
I'm really just looking for a stock, non treated one if possible. Not that the Grip Tec isn't an upgrage for sure! Still on the hunt.
__________________
'17 Whipple'd S550 Mustang, Stage 1 (750hp) kit, all stock otherwise less M/T ET Street Radials/VMS Rear Drag Pack Only. 643 RWHP (dynojet). 10.92@128, 1.59 60' (2800 ft corrected D/A). 91 Octane+Boostane Octane Booster.
Many other turbo LS/Ford Builds to date, see my YouTube channel YouTube Channel: https://www.youtube.com/channel/UCr7..._as=subscriber |
|
06-30-2021, 03:41 PM | #7 |
Drives: 2014 1SS/1LE Join Date: Nov 2015
Location: Louisville, KY
Posts: 826
|
Maybe I'll buy the grip tec 3.75 and sell you my stocker...
Sent from my Pixel 5 using Tapatalk
__________________
830 WHP 700 WTQ, Whipple 2.9 @ 13lbs Boost, Flex Fuel Tune by Blevins Tuning, LSA SBE, 3.5 GripTec, ATI LS3 Damper, AFR 260cc Mongoose, ARP Studs, Yella Terra Ultralites, Johnson 2110R, BTR PDS Stage 3, Melling 10355, Improved Racing Baffle, ID1050X, DSX Triple Fuel Pump, RotoFab CAI, NW 103mm TB, Stainless Works 1-7/8" LTH to 3" Speed Eng w/ X-pipe to NPP, Powermaster 9509 XS, Detroit Speed Motor Mounts, MGW, Monster LT1-S, ZL1 Calipers, DBA Rotors & Pads, Bilstein B6 Struts & Shocks, BMR 1.25" Drop Springs & Adj Rear Bar, Pegasus Solid Bushings, Z/28 Wheels, other misc parts.
|
06-30-2021, 04:02 PM | #8 |
Drives: Whipple'd Mustang S550 Join Date: Jun 2014
Location: Kansas
Posts: 71
|
If you have a stock 3.7, and the price is right, i'm game!
__________________
'17 Whipple'd S550 Mustang, Stage 1 (750hp) kit, all stock otherwise less M/T ET Street Radials/VMS Rear Drag Pack Only. 643 RWHP (dynojet). 10.92@128, 1.59 60' (2800 ft corrected D/A). 91 Octane+Boostane Octane Booster.
Many other turbo LS/Ford Builds to date, see my YouTube channel YouTube Channel: https://www.youtube.com/channel/UCr7..._as=subscriber |
08-03-2021, 08:24 AM | #9 |
Drives: Whipple'd Mustang S550 Join Date: Jun 2014
Location: Kansas
Posts: 71
|
Thank you guys, got both pulleys and everything worked out great!
__________________
'17 Whipple'd S550 Mustang, Stage 1 (750hp) kit, all stock otherwise less M/T ET Street Radials/VMS Rear Drag Pack Only. 643 RWHP (dynojet). 10.92@128, 1.59 60' (2800 ft corrected D/A). 91 Octane+Boostane Octane Booster.
Many other turbo LS/Ford Builds to date, see my YouTube channel YouTube Channel: https://www.youtube.com/channel/UCr7..._as=subscriber |
|
|
|
|