Best Quality replacement Brembo Caliper stickers? - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

1JEWLDSSRS · 05-15-2022, 08:41 AM

Quote:

Originally Posted by George-CZ

So today we put on the first test sticker and it seems to me that it's quite big. The length of the inscription is 11 cm. 4.33"
What size did you use ..?

Attachment 1099119

Hmmm, looks about the same as mine. Is that the front, or the back? I will check again when I take her out today..

George-CZ · 05-15-2022, 02:24 PM

This is the front...

Name: 20220515_121054.jpg
Views: 179
Size: 213.3 KB

And this is the back..

Name: 20220515_111640.jpg
Views: 165
Size: 177.5 KB

The front ones are larger and on the rear brake caliper would not fit.
So the rear stickers are smaller.

Maybe it just seems to me, but the smaller (like rear) ones might be more deccent

Joe.G · 05-15-2022, 08:33 PM

Do you have a link to the ones you purchased?

George-CZ · 05-16-2022, 03:39 AM

Quote:

Originally Posted by Joe.G

Do you have a link to the ones you purchased?

I bought these.
And they look identical to the original Challenger's friend had when he bought 6 pistols.

https://www.ebay.com/itm/39402828672...0456%7Ciid%3A1

1JEWLDSSRS · 05-16-2022, 05:11 PM

OK George, here is some info. I thought mine front and back were the same size, but turns out they are NOT. Here is the measurements of mine. Fronts- the circle design is 3/4th inch, the "b" lettering is 5/8th inch and the entire design is 4.0 inches long..Rears-the circle design is 5/8th inch, the "b" lettering is 1/2 inch, 3.25 inches long. Hope this helps you out sir..

davesnever · 05-16-2022, 09:50 PM

Quote:

Originally Posted by 1JEWLDSSRS

I got mine from these folks...
https://www.facebook.com/towerdecals

I got mine from Tower as well but quite a few years ago on Ebay. Mine are white and still look the same today as new.

George-CZ · 05-17-2022, 05:49 AM

Quote:

Originally Posted by 1JEWLDSSRS

OK George, here is some info. I thought mine front and back were the same size, but turns out they are NOT. Here is the measurements of mine. Fronts- the circle design is 3/4th inch, the "b" lettering is 5/8th inch and the entire design is 4.0 inches long..Rears-the circle design is 5/8th inch, the "b" lettering is 1/2 inch, 3.25 inches long. Hope this helps you out sir..

So it's clear to me now. My set of stickers is a little bigger!
It confused me that you said they were the same. (front / rear)
And that's why it didn't agree with your photos

In any case, the ratio of the front / rear brake calipers agrees.
I'll leave it at that

Thanks a lot bro!

1JEWLDSSRS · 05-17-2022, 07:13 PM

Quote:

Originally Posted by davesnever

I got mine from Tower as well but quite a few years ago on Ebay. Mine are white and still look the same today as new.

Yes sir, agreed. Mine were installed on the calipers when they were PC'd about 4 years ago, and with a pretty thick coat of clear, they still look like the day I got them!!

1JEWLDSSRS · 05-17-2022, 07:14 PM

Quote:

Originally Posted by George-CZ

So it's clear to me now. My set of stickers is a little bigger!
It confused me that you said they were the same. (front / rear)
And that's why it didn't agree with your photos

In any case, the ratio of the front / rear brake calipers agrees.
I'll leave it at that

Thanks a lot bro!

You are welcome my friend. Sorry I confused you on the size..

Joe.G · 07-25-2023, 07:17 AM

I ended up staying Black, here are the calipers before clear, they're done and I'll get better pictures when I finally getting around to installing them. The VHT caliper Gloss clear would not dry clear no matter what we did it was cloudy. I tried two different cans. Ended up using Rust-Oleum Hi temp clear.

Joe.G · 07-25-2023, 07:19 AM

Stickers came from a seller o. Ebay, I purchased different colors from different sellers and all appeared to be good quality.

05-15-2022, 02:24 PM	#30
George-CZ Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018 Location: Czech Republic Posts: 1,592	This is the front... And this is the back.. The front ones are larger and on the rear brake caliper would not fit. So the rear stickers are smaller. Maybe it just seems to me, but the smaller (like rear) ones might be more deccent __________________ My life is a constant struggle with Camaro. K&N CAI, Stainless Power longtubes, high flow cats, modified Ragazzon High Performance axle back, Soler Performance ported throttle body, Soler Performance throttle controller, RAM clutch adjuster, modified LS7 clutch kit, Tick Performance billet bearing support, Tick Performance remote bleeder, separate clutch reservoir, BMR trailing arms, BMR toe rods, Pedders Suspension cradle bushing inserts, Control Arm Bushings, Strut tower brace, oil catch can, Hurst T-handle shifter, 20mm wheel spacers, DBA brakes, QTP Cutouts, Dynosteve tune.

05-15-2022, 08:33 PM	#31
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	Do you have a link to the ones you purchased? __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.

05-16-2022, 05:11 PM	#33
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,435	OK George, here is some info. I thought mine front and back were the same size, but turns out they are NOT. Here is the measurements of mine. Fronts- the circle design is 3/4th inch, the "b" lettering is 5/8th inch and the entire design is 4.0 inches long..Rears-the circle design is 5/8th inch, the "b" lettering is 1/2 inch, 3.25 inches long. Hope this helps you out sir.. __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

07-25-2023, 07:17 AM	#38
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	I ended up staying Black, here are the calipers before clear, they're done and I'll get better pictures when I finally getting around to installing them. The VHT caliper Gloss clear would not dry clear no matter what we did it was cloudy. I tried two different cans. Ended up using Rust-Oleum Hi temp clear. __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.

07-25-2023, 07:19 AM	#39
Joe.G Drives: 2014 2SS/RS 6SP Ashen Grey Join Date: Aug 2021 Location: NY Posts: 1,264	Stickers came from a seller o. Ebay, I purchased different colors from different sellers and all appeared to be good quality. Attached Images __________________ GM 3.91/TrueTrac OEM ZL1 Rims, Brakes & Side Skirts.ACST4 Splitter/Deflectors NPP M2W,GM Short Throw,Remote Clutch reservoir GPI Ported Rod Mod,BO White PTB,CAI/JRE Scoop, Moroso Catch Can GC Aluminum DS Stainless Works Ceramic LTH/HiFlo Cats SCT X4 Dynosteve, Hotckis 1" Springs & Chassis Max Brace BMR Adjustable Swaybars,Trailing Arms, Adjustable Toe Rod, LCA & Z28 UCA Bushings Hendrix Solid Cradle Bushings Pedders Radius Rod Inserts Strut tower brace Hero Smoked Tail and 3rd Brake Light, Diode Dynamic SL1 Fog Lights AeroForce Dual gauge/Autometer pillar mount.