09-25-2011, 10:51 PM | #1 |
Drives: 2011 LS CGM / '01 Trans am (ls6) Join Date: Jul 2011
Location: Kansas city, MO
Posts: 84
|
Looking to sell my MRT 2.0's in a couple days
They have around 3k miles on them and they were welded, there was a slight vibration in my car around 2500 rpm that sounded like it was caused from drone.. I have decided to just go the cat back route since I saved enough for the one I want, I'll upload pictures tomorrow.. Considering that they were welded and have 3k miles I'm asking $215+ shipping so let me know if you have any questions
|
09-26-2011, 04:42 AM | #2 |
Drives: 1997 30th Ann. Z28 & 2010 2LT RS Join Date: Jan 2010
Location: Suffolk Virginia
Posts: 1,933
|
Very Interested here . Pm sent
Do you still have the clamps ?
__________________
|
09-26-2011, 04:59 AM | #3 |
mlallison61266
|
What do u think bee..im concerned with them being weilded if they will fit properly once they are cut off
|
09-26-2011, 06:42 AM | #4 |
Drives: 1997 30th Ann. Z28 & 2010 2LT RS Join Date: Jan 2010
Location: Suffolk Virginia
Posts: 1,933
|
As long as they cut back on the stock pipe a inch or two when he removes them you should fine . Then just grind off the old welding and clamp or weld back on .
__________________
|
09-26-2011, 08:05 AM | #5 |
Drives: 2011 LS CGM / '01 Trans am (ls6) Join Date: Jul 2011
Location: Kansas city, MO
Posts: 84
|
Yeah I will make sure I get enough cut for them to fit, im replacing my whole exhaust with a cat back so that should not be a problem as far as distance of the cut goes, it will be around 4 days before the dealer takes them off. ill take pictures of the exhaust when I get home and post them.
|
09-26-2011, 08:07 AM | #6 |
Drives: 1997 30th Ann. Z28 & 2010 2LT RS Join Date: Jan 2010
Location: Suffolk Virginia
Posts: 1,933
|
Thanks for the info.
__________________
|
09-26-2011, 08:09 PM | #7 |
Drives: 2011 LS CGM / '01 Trans am (ls6) Join Date: Jul 2011
Location: Kansas city, MO
Posts: 84
|
I'll post pictures tomorrow, I didn't get home till dark so I couldn't take one
|
09-27-2011, 04:52 PM | #8 |
Drives: 2011 LS CGM / '01 Trans am (ls6) Join Date: Jul 2011
Location: Kansas city, MO
Posts: 84
|
These are some pictures, I do not have the clamps that came with the exhaust. let me know if there is any other pictures you want and the exhaust will be cut a distance back on stock so it will be easy for you to weld or clamp if you get some, back to the car. As far as shipping goes, im in 64081.. you guys can find out how much it will be from here and the buyer needs to let me know their preference of shipping, weight is 34lbs. Thanks, Dylan. |
09-27-2011, 07:21 PM | #9 |
mlallison61266
|
Hey I called my brother in law to see if he could weld them for me. He broke down and told me I already have a set of mrt's..he bought them for me a couple of weeks ago and has them tucked away in the garage for christmas..sorry I put you guys out to help me but I didnt know he had ordered them. He got me the loud ones the MRT V 1.0.
Michelle Allison |
09-27-2011, 07:24 PM | #10 |
mlallison61266
|
They are a great deal Dylan and shipping was only $40 ground ups. Im sure you wont have any problem selling them.
|
09-27-2011, 08:29 PM | #11 |
Drives: 1997 30th Ann. Z28 & 2010 2LT RS Join Date: Jan 2010
Location: Suffolk Virginia
Posts: 1,933
|
I'll still ask around for you , we have a club meeting tomorrow night.
__________________
|
09-27-2011, 09:33 PM | #12 |
Drives: MMX Camaro 2LT RS Join Date: May 2010
Location: Indianapolis
Posts: 71
|
How much you think for shipping to 46037? Im not very familiar with figuring that out other than when i drop a box on the counter at the post office. :-/ Was hoping to convince family to get these for me for my birthday but that's a great price if they're in good shape and I may do it on my own
__________________
Selene: 2010 RJT/2Tone 2LT RS A6
Blackout Front/Rear Bowties, RS badging INJEN Power-Flow Intake MRT v2 Axle-back Exhaust VMax Spiral-ported TB; VMax Ice-olator Vitesse Throttle Controller RX Catch-Can RJT Eibach Sway Bars AAC Plasma LED DRLs; Sequential Turn Signals Black Gill Inserts; Red-swapped Door and Dash ABL |
09-27-2011, 09:36 PM | #13 |
Drives: 2011 LS CGM / '01 Trans am (ls6) Join Date: Jul 2011
Location: Kansas city, MO
Posts: 84
|
Shipping wont be more than 50 bucks, and they are in good shape.. I usually polish the tips every other wash and I clean the mufflers as well.. And it's not a problem bee sting, thanks for looking and enjoy the new exhaust
|
09-27-2011, 09:39 PM | #14 |
Drives: MMX Camaro 2LT RS Join Date: May 2010
Location: Indianapolis
Posts: 71
|
Yeah, Bee told me about your post from elsewhere ;-)
I'm definitely interested. I need a least a day two discuss it though. Have you had other inquiries?
__________________
Selene: 2010 RJT/2Tone 2LT RS A6
Blackout Front/Rear Bowties, RS badging INJEN Power-Flow Intake MRT v2 Axle-back Exhaust VMax Spiral-ported TB; VMax Ice-olator Vitesse Throttle Controller RX Catch-Can RJT Eibach Sway Bars AAC Plasma LED DRLs; Sequential Turn Signals Black Gill Inserts; Red-swapped Door and Dash ABL |
|
|
Thread Tools | |
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
2010's Sold Out ! | carguy | 5th Gen Camaro SS LS LT General Discussions | 53 | 12-06-2009 01:12 PM |
Pedders December Dollar Days for the 2010 Camaro and Brand X Vehicles | JusticePete | Wheels and Tires Talk Sponsored by The Tire Rack | 85 | 07-26-2009 05:20 PM |
Im not going to sell you our car... | Shadowmind | Camaro Price | Ordering | Tracking | Dealers Discussions | 29 | 07-09-2009 12:02 PM |
Seen a 2ss/RS Black with White Strips a couple days ago on 696 in Michigan..(pics) | DETROIT2010Camaro | Camaro Photos | Spyshots | Video | Media Gallery | 32 | 05-04-2009 09:01 PM |
So I placed my order a couple days AFTER the pre-order date........ | Xmicro_SS | Camaro Price | Ordering | Tracking | Dealers Discussions | 32 | 04-06-2009 05:16 AM |