04-14-2018, 04:49 PM | #1 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
FS Fidanza LS7 Aluminum Flywheel NIB
New in Box Fidanza LS7 aluminum flywheel part number 198171, only out of box for pictures. Pm me for more info or other pictures. $350 plus shipping and PayPal fees
|
04-14-2018, 05:15 PM | #2 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
A
|
04-14-2018, 05:17 PM | #3 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
B
|
04-14-2018, 09:22 PM | #4 |
|
So did you buy this for your Z ?
Why are you not using it? And if you don't mind share what you are using, I've got to replace the clutch in my '14 Z next week. |
04-15-2018, 10:03 AM | #5 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
I ended up going with a LS1 style clutch/flywheel combo kit that would hold a little more than the stock LS7 clutch would, few engine mods in the works and was just looking for a bit more clamp load over the LS7 clutch. Going this route cost more over the stock clutch but the GM clutch is a great deal if your staying close to stock and this fly wheel would shed over 15 ponds off of the already heavy LS7 type flywheel
|
05-10-2018, 11:31 AM | #6 |
Drives: 2010 Camaro SS/RS Join Date: Mar 2014
Location: somewhere in MD
Posts: 4,883
|
pm'd
__________________
2010 2SS/RS
Z/28 intake, NW, FAST 102, speed engineering LT's, some exhaust, ATI -10% pulley, GM flex fuel injectors, DSX flex fuel sensor, MGW shifter, HP Tuners, some suspension work, stickers and a little weight loss. 12.63 @113.53 |
11-27-2018, 08:23 AM | #7 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
Bump
350 shipped to lower 48 |
06-20-2019, 07:00 AM | #8 |
Drives: 14' Red Z/28 #336 Join Date: Mar 2016
Location: Northen Indiana
Posts: 367
|
bump
|
|
|
|
|