07-01-2016, 04:51 PM | #15 |
Drives: 2013 camaro zl1 Join Date: Feb 2016
Location: North florida
Posts: 86
|
Cam, push rods, springs, 2.55 upper pulley, longtubes, cai, fuel injectors and no cats
|
12-09-2018, 02:40 PM | #16 |
Drives: 2013 camaro zl1 Join Date: Feb 2016
Location: North florida
Posts: 86
|
Now I’m on E85 and a 10% lower pulley and a ported n polished ls3 throttle body. Made 745 to the rear wheels. I ran at south ga Motorsports park last Friday night. Air temp was perfect at 45 degrees and not much humidity. Ran a 10.4 @ 133 with a crappy 60 ft or 1.66. This car really pulls hard, very happy with performance
|
12-09-2018, 06:28 PM | #17 |
fo'shizZL1
Drives: 2017 ZL1 Join Date: Aug 2017
Location: ATL
Posts: 1,281
|
Nice results! I might have missed it, but what cam is in there?
__________________
2017 ZL1 M6 Black | Maggie 2650 // 103TB // Big Gulp
Past Rides- 2014 ZL1 M6 Red Hot | Tons of mods 2004 CTS-V M6 Silver | Many mods 1995 Corvette M6 Torch Red | A few more mods 1992 Camaro M5 White | A few mods |
12-09-2018, 06:41 PM | #18 |
Drives: 2013 camaro zl1 Join Date: Feb 2016
Location: North florida
Posts: 86
|
Texas speed stage 3 blower cam
|
12-10-2018, 09:10 PM | #19 | |
Drives: ZL1 Join Date: Mar 2018
Location: Here and there
Posts: 183
|
Quote:
Are your heads and supercharger ported? What kind of fuel system are you running? Bap? Last edited by Ajax2112; 12-28-2018 at 11:32 AM. |
|
01-03-2019, 06:51 PM | #20 |
Drives: 2013 camaro zl1 Join Date: Feb 2016
Location: North florida
Posts: 86
|
Heads have never been off the car. The blower snout is ported and the LS3 throttle body is ported and pollished.
|
01-03-2019, 07:36 PM | #21 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
A6 or M6?
|
01-04-2019, 04:39 PM | #22 |
Drives: 2013 camaro zl1 Join Date: Feb 2016
Location: North florida
Posts: 86
|
Manual
|
|
|
|
|