Stainless Works Retro Chambered Cat back - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Gibby'SS · 02-07-2013, 08:46 PM

Hi:

I am checking to see if anyone would be interested in purchasing my Stainless Works Retro Chambered Cat back.

My car is a 2011 SS convertible.

The exhaust is less than a year old. I purchased from Apex/Chase.

I am considering the LG Super Pro headers and want to stay consistent on the brand. My wife thinks the SW is too loud and it will only be louder with headers.

I'm hoping to possibly sell for $800. If anyone is interested please PM me. I can take photos but the exhaust is still on the car. I am planning on switching out in the next few weeks.

Thanks for looking and let me know if you have any questions. I will ship but buyer pays shipping. I will also meet within a reasonable distance. I'm in Leesburg for the local folks who may be interested.

flyer08 · 02-07-2013, 08:53 PM

It sounds good with headers

Gibby'SS · 02-08-2013, 08:17 AM

The exhaust sounds great to me. I not the only one that matters unfortunately.

The price is not set in stone for those that have replied. I will consider reasonable offers.

Thanks for looking.

was619 · 02-08-2013, 05:12 PM

I had this exhaust with headers for a little while and ended up replacing the axel back section with LG mufflers. Still sounds pretty good to me but now it's a lot quieter. Good luck with sale!

Top Off · 02-08-2013, 06:46 PM

Did your wife not like it due to drone or just plain volume?

Gibby'SS · 02-08-2013, 11:16 PM

The volume. There is no drone with the exhaust. I also have AFM turned off.

I may have the exhaust off quicker than anticipated. Possibly next weekend.

My suspension is going on tomorrow. If there are no problems with the install and alignment I plan on ordering the LG system early next week for installation possibly next weekend or the following weekend.

I know I should wait and have it all done at once but that's the way it goes sometimes.

I'll post some photos of the suspension install in the suspension section when completed. I can't wait!

Thanks again for those who have inquired. I will consider any reasonable offer. Please remember that I have a convertible and had to purchase the installation kit in addition to the exhaust. The exhaust will fit the coupe. I could sell the convertible kit separately if someone wanted it.

LarryO · 05-14-2013, 07:21 PM

Still for sale? What is the lowest price you would take shipped to 40219?

con10der · 05-15-2013, 02:00 PM

Is it a 3" system w/ 4" tips? And does price include shipping to 88220?

amerimuscle · 05-15-2013, 04:32 PM

Hey, i have a full LG system and i want it to be louder so i wanna swap out my LG axle back, trade?

Gibby'SS · 05-15-2013, 08:22 PM

Sorry. I have sold the exhaust. I ended up purchasing full Kooks system. Thanks for your interest.

02-07-2013, 08:46 PM	#1
Gibby'SS Drives: 2011 Camaro SS Convertible Join Date: Aug 2012 Location: N. Virginia/OBX Posts: 113 View My Garage	Stainless Works Retro Chambered Cat back Hi: I am checking to see if anyone would be interested in purchasing my Stainless Works Retro Chambered Cat back. My car is a 2011 SS convertible. The exhaust is less than a year old. I purchased from Apex/Chase. I am considering the LG Super Pro headers and want to stay consistent on the brand. My wife thinks the SW is too loud and it will only be louder with headers. I'm hoping to possibly sell for $800. If anyone is interested please PM me. I can take photos but the exhaust is still on the car. I am planning on switching out in the next few weeks. Thanks for looking and let me know if you have any questions. I will ship but buyer pays shipping. I will also meet within a reasonable distance. I'm in Leesburg for the local folks who may be interested. __________________ [COLOR="Blue"]CAI Intake, Kooks 1 7/8" LT headers and full exhaust, Vmax Ported Throttle Body, TFS Gen X 255 heads, custom VVT cam by Pat Guerra, RX Catch Can, Pedderized suspension, ghosted side markers, Technostalgia tail lights, Big Worm spears, Forgestar f14 in gunmetal, Nitto Invo 275/315 455HP/422TQ.

02-08-2013, 08:17 AM	#3
Gibby'SS Drives: 2011 Camaro SS Convertible Join Date: Aug 2012 Location: N. Virginia/OBX Posts: 113 View My Garage	The exhaust sounds great to me. I not the only one that matters unfortunately. The price is not set in stone for those that have replied. I will consider reasonable offers. Thanks for looking. __________________ [COLOR="Blue"]CAI Intake, Kooks 1 7/8" LT headers and full exhaust, Vmax Ported Throttle Body, TFS Gen X 255 heads, custom VVT cam by Pat Guerra, RX Catch Can, Pedderized suspension, ghosted side markers, Technostalgia tail lights, Big Worm spears, Forgestar f14 in gunmetal, Nitto Invo 275/315 455HP/422TQ.

02-08-2013, 05:12 PM	#4
was619 Billy The Kid Drives: Cyber Grey 2SS/RS Join Date: Jun 2009 Location: North Alabama Posts: 637	I had this exhaust with headers for a little while and ended up replacing the axel back section with LG mufflers. Still sounds pretty good to me but now it's a lot quieter. Good luck with sale! __________________ CGM 2SS/RS[SIZE="1"] Performance: LT Headers/Stainless Works cat-back, 225/233 Cam, 1LE 3.91 gears, Custom Tune, BMR suspension, MGW Shifter, Stainless brake & clutch lines, Ideal G Master Cylinder, 275s on all 4 corners Aesthetics: ZL1 Spoiler, DIY LED marker lights, AACPlasma DRL, Yellow Calipers, painted factory wheels

02-08-2013, 11:16 PM	#6
Gibby'SS Drives: 2011 Camaro SS Convertible Join Date: Aug 2012 Location: N. Virginia/OBX Posts: 113 View My Garage	The volume. There is no drone with the exhaust. I also have AFM turned off. I may have the exhaust off quicker than anticipated. Possibly next weekend. My suspension is going on tomorrow. If there are no problems with the install and alignment I plan on ordering the LG system early next week for installation possibly next weekend or the following weekend. I know I should wait and have it all done at once but that's the way it goes sometimes. I'll post some photos of the suspension install in the suspension section when completed. I can't wait! Thanks again for those who have inquired. I will consider any reasonable offer. Please remember that I have a convertible and had to purchase the installation kit in addition to the exhaust. The exhaust will fit the coupe. I could sell the convertible kit separately if someone wanted it. __________________ [COLOR="Blue"]CAI Intake, Kooks 1 7/8" LT headers and full exhaust, Vmax Ported Throttle Body, TFS Gen X 255 heads, custom VVT cam by Pat Guerra, RX Catch Can, Pedderized suspension, ghosted side markers, Technostalgia tail lights, Big Worm spears, Forgestar f14 in gunmetal, Nitto Invo 275/315 455HP/422TQ.

05-15-2013, 02:00 PM	#8
con10der Con10der Drives: 2010 2SS/RS M6 IOM Rally Stripes Join Date: Aug 2012 Location: Carlsbad, New Mexico Posts: 97 View My Garage	Is it a 3" system w/ 4" tips? And does price include shipping to 88220? __________________ 2010 2SS/RS M6 IOM w/Rally Stripes. BLK CAI w/ADM,WW Relo,2" Kooks,3" Cats-Mids,Vmax Ported TB,Muff Del,Janetty SCT Tuned,Drill/Slot BLK Hawk rotors,Red Grani Brake Lines,Motul 600,IDEAL Master w/res,Moroso CC,Accel Silver Tips w/TVolt 10.4mm,MGW shift w/Retro hand/ball,ABL Kit,Billet/IOM pedals, ZL1 split,Lloyds SS mats,PC Droid4/MAXX docking,HW Solo2. Pend Install: Launch/Shift Light,BMR Susp/1" Drop/Sways/Track Pack,GM 3.9. Future: Janetty Pumpkin w/PosiTrac,1400HP axl,CF DS,Tick Stage 2 Trans,3 Disc Clutch,4"quad tip,center exit AB w/diff...

02-07-2013, 08:53 PM	#2
flyer08 Account Suspended Drives: 2010 2SS/RS Join Date: Jun 2009 Location: Texas Posts: 3,418	It sounds good with headers

02-08-2013, 06:46 PM	#5
Top Off Drives: 2012 LS3 1SS/RS Vert Join Date: Dec 2012 Location: Hamburg Posts: 371	Did your wife not like it due to drone or just plain volume?

05-14-2013, 07:21 PM	#7
LarryO Drives: 2016 Jeep Rubicon / 2009 Corvette Join Date: May 2013 Location: Louisville KY. Posts: 70	Still for sale? What is the lowest price you would take shipped to 40219?

05-15-2013, 04:32 PM	#9
amerimuscle Drives: 2011 Camaro 1SS Join Date: Dec 2011 Location: Cleveland Ohio Posts: 414	Hey, i have a full LG system and i want it to be louder so i wanna swap out my LG axle back, trade?

05-15-2013, 08:22 PM	#10
Gibby'SS Drives: 2011 Camaro SS Convertible Join Date: Aug 2012 Location: N. Virginia/OBX Posts: 113 View My Garage	Sorry. I have sold the exhaust. I ended up purchasing full Kooks system. Thanks for your interest. __________________ [COLOR="Blue"]CAI Intake, Kooks 1 7/8" LT headers and full exhaust, Vmax Ported Throttle Body, TFS Gen X 255 heads, custom VVT cam by Pat Guerra, RX Catch Can, Pedderized suspension, ghosted side markers, Technostalgia tail lights, Big Worm spears, Forgestar f14 in gunmetal, Nitto Invo 275/315 455HP/422TQ.