NGauge questions on analog inputs - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

TTTAPOUT · 04-20-2018, 01:21 PM

I have the NGauge, and got the analog input harness. I have 2 wideband from Innovative and I can’t get the NGauge to show or see them. I can get the analog input to show on the gauge, but it registers 0. I have tested the output with a meter and the output wires are doing their thing. I just can get the analog input to show. I currently have the yellow wires from the wideband, which are the 5volt reference wires hooked to the red and yellow input wires. I have tried with and without ground, still nothing.

1LEric · 04-26-2018, 09:20 PM

Did you check the settings for the analog inputs ?

04-20-2018, 01:21 PM	#1
TTTAPOUT Drives: 2013 ZL1 Join Date: Jan 2017 Location: Fort Myers, FL Posts: 101	NGauge questions on analog inputs I have the NGauge, and got the analog input harness. I have 2 wideband from Innovative and I can’t get the NGauge to show or see them. I can get the analog input to show on the gauge, but it registers 0. I have tested the output with a meter and the output wires are doing their thing. I just can get the analog input to show. I currently have the yellow wires from the wideband, which are the 5volt reference wires hooked to the red and yellow input wires. I have tried with and without ground, still nothing.

04-26-2018, 09:20 PM	#2
1LEric Drives: 2015 Camaro 1LE Join Date: Jun 2016 Location: NJ Posts: 152	Did you check the settings for the analog inputs ?