01 Maro V6 EVAP canister - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

White_Knuckle_Tight · 06-07-2010, 08:40 PM

Ok, I know the EVAP can is behind the fuel door somewhere, but I can't see it from under the car. So how do I get to it? Anyone gotta photo-walkthru maybe?

Oh, and this has nothing to do with the EVAP system (obviously) but how do I remove the plastic piece under the wiper arms? My passenger side fluid jet is clogged and I need to remove that piece to get to the line.

02 WS6 TA · 06-07-2010, 09:17 PM

The EVAP is on top of the fuel tank; You have to drop the tank to access it. Why are you asking about it? What code did you set?

The Plastic cladding under the wipers is actually 3 pieces, 2 plastic halves, and a rubber strip. It's retained by plastic expansion clips.

White_Knuckle_Tight · 06-07-2010, 09:20 PM

I can't remember exactly what the two codes were but they were both EVAP codes.

And how exactly do I take them off? I looked at it for a sec and couldn't see anyway of removing it.

EDIT: Just checked the code listing. I believe the codes were P440 and and P441. I almost positive. That reminds me, I've got a new purge valve, that I brought home, and completely forgot to put on. Should I just try that first?

02 WS6 TA · 06-08-2010, 11:32 AM

Tighten your gas cap.

White_Knuckle_Tight · 06-08-2010, 01:32 PM

replaced it already...I forgot to say that.

02 WS6 TA · 06-08-2010, 01:37 PM

It's evidentally not passing the self-test- Either drop and replace, or (my vote) delete reporting via HPT or the like.

White_Knuckle_Tight · 06-10-2010, 08:54 PM

HPT?

02 WS6 TA · 06-11-2010, 06:14 AM

HP Tuners.

*CamaroSpike23* · 06-11-2010, 06:37 AM

this issue popped up on me once or twice before (once on my 94 Z28 and once on my pickup)

reset the computer and see if it comes back.

Revo1 · 06-11-2010, 01:44 PM

Do you know why I pulled you over?

You do know that misuse of the word "Camaro" is a felony in the state of Everywhere, don't you? Listen, just have the "Maro" changed and I'll let you off with a warning. This time

06-07-2010, 08:40 PM	#1
White_Knuckle_Tight Drives: 2001 Camaro V6 Join Date: Jan 2010 Location: Meally, KY Posts: 286	01 Maro V6 EVAP canister Ok, I know the EVAP can is behind the fuel door somewhere, but I can't see it from under the car. So how do I get to it? Anyone gotta photo-walkthru maybe? Oh, and this has nothing to do with the EVAP system (obviously) but how do I remove the plastic piece under the wiper arms? My passenger side fluid jet is clogged and I need to remove that piece to get to the line. Last edited by White_Knuckle_Tight; 06-07-2010 at 09:06 PM.

06-11-2010, 01:44 PM	#10
Revo1 Don't Like it? Suggit. Drives: 2010 2SS/RS Join Date: Aug 2008 Location: Fresno, CA Posts: 14,832 View My Garage	Do you know why I pulled you over? You do know that misuse of the word "Camaro" is a felony in the state of Everywhere, don't you? Listen, just have the "Maro" changed and I'll let you off with a warning. This time __________________ "Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
V6 Camaro Performance Upgrades	rtcat600man	Camaro V6 LLT Engine, Exhaust, and Bolt-Ons	387	09-19-2019 06:53 PM
JBA Performance Headers \| Mid-Pipes \| Exhausts \| V6/V8 \| FREE S&H!!!	AJ@ECSMotorsports	V8 Bolt-Ons & Tunes	100	11-13-2010 03:51 PM
V6 Cami VS V6 Genesis..LOL	MillerTime	Chevy Camaro vs...	226	06-09-2010 09:00 AM
328i vs 2010 V6 Maro	Gah!	Chevy Camaro vs...	11	05-05-2010 09:37 AM
Who has driven the V6 and the V8? Need your thoughts	sask-man	5th Gen Camaro SS LS LT General Discussions	52	02-19-2010 10:06 PM

06-07-2010, 09:17 PM	#2
02 WS6 TA Account Suspended Drives: GM Stuff Join Date: Sep 2009 Location: Panama City Beach, FL Posts: 727	The EVAP is on top of the fuel tank; You have to drop the tank to access it. Why are you asking about it? What code did you set? The Plastic cladding under the wipers is actually 3 pieces, 2 plastic halves, and a rubber strip. It's retained by plastic expansion clips.

06-07-2010, 09:20 PM	#3
White_Knuckle_Tight Drives: 2001 Camaro V6 Join Date: Jan 2010 Location: Meally, KY Posts: 286	I can't remember exactly what the two codes were but they were both EVAP codes. And how exactly do I take them off? I looked at it for a sec and couldn't see anyway of removing it. EDIT: Just checked the code listing. I believe the codes were P440 and and P441. I almost positive. That reminds me, I've got a new purge valve, that I brought home, and completely forgot to put on. Should I just try that first?

06-08-2010, 11:32 AM	#4
02 WS6 TA Account Suspended Drives: GM Stuff Join Date: Sep 2009 Location: Panama City Beach, FL Posts: 727	Tighten your gas cap.

06-08-2010, 01:32 PM	#5
White_Knuckle_Tight Drives: 2001 Camaro V6 Join Date: Jan 2010 Location: Meally, KY Posts: 286	replaced it already...I forgot to say that.

06-08-2010, 01:37 PM	#6
02 WS6 TA Account Suspended Drives: GM Stuff Join Date: Sep 2009 Location: Panama City Beach, FL Posts: 727	It's evidentally not passing the self-test- Either drop and replace, or (my vote) delete reporting via HPT or the like.

06-10-2010, 08:54 PM	#7
White_Knuckle_Tight Drives: 2001 Camaro V6 Join Date: Jan 2010 Location: Meally, KY Posts: 286	HPT?

06-11-2010, 06:14 AM	#8
02 WS6 TA Account Suspended Drives: GM Stuff Join Date: Sep 2009 Location: Panama City Beach, FL Posts: 727	HP Tuners.