Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
TireRack
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Marketplace > Members Classifieds - Parts for sale or wanted > Audio / Visual / Electronics/ Gauges / Nav


Reply
 
Thread Tools
Old 02-15-2015, 11:29 PM   #1
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
2010-2013 Chevrolet Camaro Multicolor Fog Light LEDs

I have a set of these from diode Dynamics. Nothing wrong with them, just want to change up. These will fit non RS cars when you buy them. RS drl's use a different housing. But I have them mounted in my RS. I had to buy non Rs fogs and mount them in that. They just pop in like the stock DRL for you RS guys. I lightly sealed the bulbs in with rtv clear,to prevent any water from entering.

I won't included the controller. You can pick up one for under 10 from ebay. Or ebay has a US seller that sells a bluetooth controller which you can control it from phone or ipod for about 40. Thats what I bought.

So you get 2 foglights($100) and 2 RGB bulbs($75.00)and in return you send me your RS fogs. Bulb doesn't matter. The only problem is my car is a DD. So I will need your RS fogs first. You can see by my Rating I'm trustworthy.

http://www.diodedynamics.com/store/2...fog-light-leds


If you want to buy it,make me an offer. No lowballers. Make me a fair offer for the fogs and ligts, I can include a controller for it as well.

Last edited by 2011 RJT; 03-03-2015 at 02:48 PM.
2011 RJT is offline   Reply With Quote
Old 02-17-2015, 09:05 AM   #2
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
bump
2011 RJT is offline   Reply With Quote
Old 02-18-2015, 09:31 PM   #3
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
no one? Easier than cutting your fogs open for rings. This is all plug and play!
2011 RJT is offline   Reply With Quote
Old 02-21-2015, 02:17 PM   #4
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
Trade straight up for you RS DRL's. If you don't have the RS package, make an offer.
2011 RJT is offline   Reply With Quote
Old 02-22-2015, 03:49 AM   #5
azozrail1991
 
Drives: Camaro 2ss
Join Date: Jul 2014
Location: United States
Posts: 115
50
azozrail1991 is offline   Reply With Quote
Old 02-22-2015, 05:24 AM   #6
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
Quote:
Originally Posted by azozrail1991 View Post
50
Nope. just for the lights,maybe,but not for the fogs and lights.
2011 RJT is offline   Reply With Quote
Old 02-22-2015, 09:24 AM   #7
azozrail1991
 
Drives: Camaro 2ss
Join Date: Jul 2014
Location: United States
Posts: 115
Quote:
Originally Posted by 2011 RJT View Post
Nope. just for the lights,maybe,but not for the fogs and lights.
the lights and 15 for controller
azozrail1991 is offline   Reply With Quote
Old 02-22-2015, 10:04 AM   #8
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
want to sell both. Have RS car, if I kept the fogs,couldn't hook up fogs to RS DRL connector. Easier for me to swap out your DRL's for my fogs and lights. I need RS drl housings because they have the PW13 connection. The non RS fogs have a different one. I forget the number. But the end that has the connector is not interchangeable

Last edited by 2011 RJT; 02-22-2015 at 10:24 AM.
2011 RJT is offline   Reply With Quote
Old 02-22-2015, 06:29 PM   #9
azozrail1991
 
Drives: Camaro 2ss
Join Date: Jul 2014
Location: United States
Posts: 115
my car ha RS package, they wont fit?
azozrail1991 is offline   Reply With Quote
Old 02-23-2015, 01:44 AM   #10
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
please read. You'd have to take your housings out,then replace with non RS fog lights. They are the same thing as the RS lights EXCEPT for the bulb and how the cars wiring hook to the bulb. You just have to pop off the trim around the drl's. if you can get the car on ramps,slide under the front end and look up at the drls. There are 3 plastic things you have to squeeze in and push out towards front one at a time. DRL will pop out. You just disconnect the harness and one side is done. If I sent you mine you would just pop the light in,run the wires to where ever you mounted a controller. the power to the controller and you're done. You don't use the stock hook up.
2011 RJT is offline   Reply With Quote
Old 02-23-2015, 09:12 PM   #11
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
Quote:
Originally Posted by azozrail1991 View Post
my car ha RS package, they wont fit?
Pop out your DRL's and send them to me. http://www.camaro5.com/forums/showthread.php?t=74684
I will send you mine with the led's already installed. Just hook up a power and ground get a controller http://www.ebay.com/itm/44-KEY-24-KE...item233c987362 and your set.
2011 RJT is offline   Reply With Quote
Old 02-24-2015, 07:15 AM   #12
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
To simplify this I need a set of housings that accept the P13W bulbs NOT the 5202 bulbs. In return you will get housings that accept 5202 bulbs,the RGB leds,etc. The housings are interchangeable to any model. Its the factory harness that is different. (RS cars have P13W plugs and non RS have 5202 plugs)
2011 RJT is offline   Reply With Quote
Old 02-25-2015, 10:58 PM   #13
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
bump
2011 RJT is offline   Reply With Quote
Old 02-27-2015, 01:54 AM   #14
2011 RJT
 
2011 RJT's Avatar
 
Drives: 2011 RJT/RS
Join Date: Jan 2013
Location: Philly
Posts: 462
pic showing how the bulbs connect to the light housing. Notice how different...
Attached Images
  
2011 RJT is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 11:04 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2021, vBulletin Solutions, Inc.