04-29-2019, 06:15 PM | #1 |
Drives: 2013 2SS 6 spdBorla attack, CAI,LTH Join Date: Apr 2017
Location: Maine
Posts: 75
|
typical labor cost
Hey, Planning next upgrade and was looking for an estimate on a reasonable time for an experienced shop to swap rear end gears.
Thanks all |
04-29-2019, 06:39 PM | #2 |
USA-1
|
I think mine took a day or two. I've heard it's a 4-hourish swap. Labor ran me about $1000.
__________________
"A Camaro in the garage is safe, but that's not what Camaros are built for..."
R2C CAI / Apex Scoop / VMAX Ported TB / Speed Engineering LTHs / X-pipe / GPI port/rod-mod intake manifold / Circle D 3200 278mm Converter / 3.91 gears / DynoSteve tuned / 1LE Shocks/Struts/Toe Links / ZL1 Rear Sway Bar / Z/28 Trailing arms / Prothane Radius Arm & Subframe Bushings / BMR UCA Bracket, Steering rack bushing / B&M Tranny Cooler / RX Catch Can / Jannetty Tranny Dipstick / 2012+ Heater Hose / 2013+ Rearview Mirror / Fuel rail flip / Drake shifter / Oil Cooler Delete |
04-29-2019, 08:12 PM | #3 |
SomeguyK
Drives: 2010 Black 2SS/RS Join Date: Nov 2014
Location: FL
Posts: 1,947
|
Dropping the diff off or do they need to pull it? If appointment is made should be done in a day. Cost?? It depends on the shop and the answer to the question I posed.
__________________
TMS 427, Dart iron Block, Forged assembly, Frankenstien heads, AGP TT 62/62 BB turbo's, AGP/Fore triple fuel system, Tilton clutch, Holley 1 7/8 shorties, Technostalgia tail lights,Oracle, Aeroforce, MGW shifter,Flowmaster, Pegasus subframe bushings,BMR trailing & toe arms,Z28 UCA bushings,Zl1 rear sway bar,Prothane,BMR,Goodridge brake lines,Ridetech HQ coilovers,3.91,Trutrac,billet caps,DSS axles,HE offest,built TR6060,1LE diffuser,Havoc spoiler,SSclones,20in MRR 017, Pirelli P Zero, Nitto NT555RII
More to come. |
04-29-2019, 09:39 PM | #4 |
Drives: 2013 2SS 6 spdBorla attack, CAI,LTH Join Date: Apr 2017
Location: Maine
Posts: 75
|
Just looking for a reasonable labor time for an experienced shop to pull and replace
|
|
|
|
|