Adding Mylink to older gen5 camaro's

[Pagliaro]

Originally Posted by GTPprix

This has been answered a million times (ok almost) no. Changing bus revisions requires custom software.

Not only is the gen5diy kit cheaper but it's actually programmed right and upgradable

All leocelular's posts are related to mylink and it seems like leocelular want's something as easy as swapping headunits and not the rest of the work behind the installation. Though there may be a language barrier so I'm not sure I am reading into it accurately.

This mod is not a buy and swap for either Autotechspa or Gen5DIY.

Gen5DIY's is set up properly for your specific CANBUS via GTPPrix's custom calibration/programming.

I'd suggest purchasing a kit from Gen5DIY and follow the DIY that will be provided or hire a person capable of doing the install.

[younglarryd]

2SS/RS@GEN5DIY, any idea when this kit will be listed on your website? Cost? Thanks

[2SSRS@Gen5diy]

next week ones the group buy is done.

[WarWolfX0]

Originally Posted by GTPprix

This has been answered a million times (ok almost) no. Changing bus revisions requires custom software.

Not only is the gen5diy kit cheaper but it's actually programmed right and upgradable

What do you mean "upgradable"?

[Pagliaro]

Originally Posted by WarWolfX0

What do you mean "upgradable"?

Should chevy ever have any important future updates to MYLINK '13 you have an option to send it to GTPprix for the new updates.

[mongrel50]

I just received my Nav kit from Gen5DIY yesterday and Installed it this morning, man I love it!!!! I will be posting some pics in the morning, but I had to get on and give the guys props for great customer service(Especially the patience with my many questions). I will even go as far to say it was the best I have had in the auto industry. I wish they would sell more stuff so that I could buy everything from them!! A good price is great (Which they have great prices) but good customer service is where it is at for me.
Thanks again guys and I will be recommending you to everyone.

[AlexM]

Originally Posted by mongrel50

I just received my Nav kit from Gen5DIY yesterday and Installed it this morning, man I love it!!!! I will be posting some pics in the morning, but I had to get on and give the guys props for great customer service(Especially the patience with my many questions). I will even go as far to say it was the best I have had in the auto industry. I wish they would sell more stuff so that I could buy everything from them!! A good price is great (Which they have great prices) but good customer service is where it is at for me.
Thanks again guys and I will be recommending you to everyone.

How long between when you received the invoice and receiving the package, if you don't mind? I am waiting on mine

[Mrbowtie26]

Is there a page with the cost of the Gen5DIY for a 2012 Camaro with or without NAV ? My apologies but I did not read all of the pages.
Thank you

EDIT Never mind found all the info thanks

[2SSRS@Gen5diy]

Originally Posted by Mrbowtie26

Is there a page with the cost of the Gen5DIY for a 2012 Camaro with or without NAV ? My apologies but I did not read all of the pages.
Thank you

Here you go.

http://www.camaro5.com/forums/showthread.php?t=366584

[AlanK]

I received my MyLink/Nav kit about a month ago. I finally got the time and weather to do the install and everything appeared to go seamlessly. I rechecked all cabling 3-4 times before powering up for testing but I have not display on the touchscreen. The unit appears to be getting some power because I can control the A/C, flashers, and radio on/off/volume from the new faceplate. I pinned out the cables again using a multimeter for continuity and everything seems correct. Has anyone experienced this problem with the new faceplate?

Assistance greatly appreciated!!!

[20112SSRSMOD'r]

My install dvd doesn't seem to be working so ive been using the PDF. My problem is that the PDF does not cover were the 3 pins go on the X2 connector. Does anyone one have this info handy?

[6spdLs3]

I have a 2011 1SS, do I need to install the blue tooth module in the console before I put this in?

Just to clarify, buying a used radio with the vin won't be of any use?

Thanks

[Rico]

I hope you are still selling these next year. I'm about to move so can't tie up funds right now. This is such a great mod.

[2SSRS@Gen5diy]

Originally Posted by 20112SSRSMOD'r

My install dvd doesn't seem to be working so ive been using the PDF. My problem is that the PDF does not cover were the 3 pins go on the X2 connector. Does anyone one have this info handy?

If you can call us up its faster, we where moving to a new shop last week and part of yesterday.

Originally Posted by 6spdLs3

I have a 2011 1SS, do I need to install the blue tooth module in the console before I put this in?

Just to clarify, buying a used radio with the vin won't be of any use?

Thanks

no need for any of that.

Originally Posted by Rico

I hope you are still selling these next year. I'm about to move so can't tie up funds right now. This is such a great mod.

let us know when your ready.