06-18-2013, 10:25 PM | #1 |
Drives: 13 1LE, 17 Sierra, 84 MonteSS, Join Date: May 2009
Location: Deaborn Heights, MI
Posts: 454
|
Race Ramps
I picked me up a set of Race Ramps One-Piece Ramps RR-56 and used them to help me install my skip shift eliminator. Should be plenty high for oil changes too. They are perfect for the stock ride height, may not be for lowered cars but they sell longer ones or extensions as well.
|
06-18-2013, 10:28 PM | #2 |
Drives: SS 1LE Join Date: Nov 2012
Location: Texas
Posts: 1,829
|
will these clear the splitter? How close does the splitter come?
|
06-18-2013, 10:41 PM | #3 |
Drives: 13 1LE, 17 Sierra, 84 MonteSS, Join Date: May 2009
Location: Deaborn Heights, MI
Posts: 454
|
Yes they cleared just fine. I can take pics tomorrow but if my memory is correct it was over an inch from the ramps. I will check tomorrow though.
|
06-18-2013, 10:54 PM | #4 |
Drives: 2011 Camaro SS, 2012 Shelby GT500 Join Date: Jan 2013
Location: Columbus, Ohio
Posts: 87
|
Get the two piece. They are are so much better because you can access the under body from the side much better. Remember to get wheel chocks.
Sent from my iPad using Tapatalk HD |
06-18-2013, 11:01 PM | #5 | |
Drives: 13 1LE, 17 Sierra, 84 MonteSS, Join Date: May 2009
Location: Deaborn Heights, MI
Posts: 454
|
Quote:
I went with the one piece set because they are almost half the price and I'm skinny so no issue for me ha ha. That remids me I need to fill out a form and send in for a free set of chocks from them. Bought mine through summit and they have different rebates on different sets. Some is like $20 and some get the chocks. |
|
06-18-2013, 11:25 PM | #6 |
Drives: SS 1LE Join Date: Nov 2012
Location: Texas
Posts: 1,829
|
|
06-19-2013, 12:53 AM | #7 |
Tri-County Camaro SWFL
|
I think I will be getting a set
__________________
|
06-19-2013, 09:46 AM | #8 |
2013 Camaro SS1LECTSVZ28
Drives: 2013 AGM 1SS/1LE Join Date: Nov 2012
Location: Suburbs of Detroit, MI
Posts: 2,440
|
Glad they worked out for you.
-Matt
__________________
|
06-19-2013, 09:59 AM | #9 |
San Diego Head Tuners
Drives: 2016 Camaro 1SS ,NPP,MagRide, A8 Join Date: May 2009
Location: Temecula, CA
Posts: 2,440
|
+1. I have these and it makes getting under the car much easier.
__________________
2016 1SS A8, NPP, MagRide, Black Rims
My 5th Camaro (3 Gen5, 1 Gen4) Member of San Diego Head Tuners https://www.youtube.com/c/MojaveKY https://www.instagram.com/mojaveky/ https://twitter.com/MojaveKY http://dinowax.refr.cc/bryanm 15% off DinoWax orders |
06-19-2013, 10:57 AM | #10 |
Drives: 2012 2LT/RS Join Date: Oct 2011
Location: Northeast
Posts: 1,443
|
Amazon has good price and rebate
|
06-19-2013, 11:54 AM | #11 |
San Diego Head Tuners
Drives: 2016 Camaro 1SS ,NPP,MagRide, A8 Join Date: May 2009
Location: Temecula, CA
Posts: 2,440
|
That's good cause these things are pricey
__________________
2016 1SS A8, NPP, MagRide, Black Rims
My 5th Camaro (3 Gen5, 1 Gen4) Member of San Diego Head Tuners https://www.youtube.com/c/MojaveKY https://www.instagram.com/mojaveky/ https://twitter.com/MojaveKY http://dinowax.refr.cc/bryanm 15% off DinoWax orders |
06-19-2013, 07:19 PM | #12 |
Drives: 13 1LE, 17 Sierra, 84 MonteSS, Join Date: May 2009
Location: Deaborn Heights, MI
Posts: 454
|
Here's a few more pics showing how much clearance there is with the tire at the base of the ramp (on cement). Its a little closer toward the middle of the car since the nose and splitter stick out a bit but no issues here
|
06-19-2013, 07:43 PM | #13 |
Drives: SS 1LE Join Date: Nov 2012
Location: Texas
Posts: 1,829
|
Great pics, thanks for going through all the trouble.
|
06-19-2013, 08:27 PM | #14 |
Drives: 13 1LE, 17 Sierra, 84 MonteSS, Join Date: May 2009
Location: Deaborn Heights, MI
Posts: 454
|
No problem at all, happy to help.
|
|
|
|
|