12-21-2012, 11:09 AM | #1 |
Drives: 2013 ZL1 Join Date: Oct 2012
Location: puyallup
Posts: 543
|
blower cam sizing?
looking into a solid cam set up for this spring when i tear into the zl1. Looking for feedback from people that have done the cam swap already. was looking at the lingenfelter gt9 cam but it doesn't seem aggressive as i would like to go. what cam size did you go and would you do it again?
__________________
C6Z06 400ci, twin gen 2 promod 88's,th400, Alky car
|
12-23-2012, 02:49 AM | #2 |
Drives: LSx Performance Specialist Join Date: Jul 2011
Location: Lafayette, LA
Posts: 517
|
Ace,
We have been using a cam with around 2 degrees overlap that works great with Hesse motors. Just made 650rwhp on the dyno with No Headers!!! Car drives Flawless. 22x/23x 116lsa. Shawn |
12-23-2012, 07:46 PM | #3 |
Drives: 2013 ZL1 Join Date: Oct 2012
Location: puyallup
Posts: 543
|
solid numbers, what other mods were on the car? i would like to see low 7xx whp with a 102 TB long tubes ported snout and the cam and 9.1 lower and 2.5 upper
__________________
C6Z06 400ci, twin gen 2 promod 88's,th400, Alky car
|
06-19-2013, 08:28 PM | #4 | |
|
Just did the BTR stage 3 cam. Same cam redline used.
__________________
2013 ZL1 BONE STOCK! LOL
|
|
|
|
Thread Tools | |
|
|