You are browsing camaro5 
 |
|
11-15-2020, 12:28 PM
|
#1 |
        
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,728
|
Sold
Like the title says, I have a low mileage ZL1 3.23 diff I am taking out and replacing with a 3.73.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. Last edited by CamaroCracka; 03-07-2021 at 07:17 PM. |
|
|
|
11-18-2020, 07:54 AM
|
#2 |
 Drives: 2015 Camaro SS 1LE Join Date: Feb 2017
Location: Miami
Posts: 353
|
Willing to sell Diff alone?
|
|
|
|
|
11-19-2020, 07:24 AM
|
#3 |
|
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,728
|
I'd take 1300 for it.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
|
|
|
|
01-19-2021, 09:52 AM
|
#4 |
|
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,728
|
Just put in a DSS driveshaft. Will throw the stock ZL1 drive shaft in with the diff. $1300 for both.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
|
|
|
|
02-08-2021, 09:41 AM
|
#5 | |
 Drives: 2013 1SS Join Date: Oct 2017
Location: Tampa
Posts: 31
|
Quote:
U still got it? Is it for auto or manual? |
|
|
|
|
|
02-08-2021, 01:27 PM
|
#6 |
|
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,728
|
Still have it. Never fails, whenever I put parts on shelf, someone inquires.
It's the 3.23 out of an auto, but I ran it in a manual car, so the drive shaft is for a manual. I'll be down at Homestead next weekend running with Chin. If your serious about it, I can bring it with me and meet up in the middle.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
