05-17-2024, 07:30 PM | #1 |
Camaro Addiction
Drives: 68SS81Z2887IROC97Z28SS,12ZL1,22ZLE Join Date: Dec 2009
Location: Baton Rouge, LA
Posts: 341
|
Front spoiler / splitter removal help
Found a low mile ‘15 Z/28 finally. Need to replace the splitter / spoiler on the front end. Trying to remove the front splitter / spoiler. Researched the forums with drawings, etc.but can’t identify the bolts under the inner wheel liners that need to be removed. Many bolts removed overall but can’t get separation on the ends. Any advice would be appreciated!!
__________________
ZL1....thank you Chevy Gods!
2012 Camaro ZL1 VIN #0004 ZL1, Ashen Grey, Black Leather, 6 speed, suede, exposed carbon fiber weave, gray stripe Current Status: Cruisin' !! 3800 Produced: 1/27/2012 6000 Delivered To Customer: 4/27/2012 Last edited by Z Boss; 05-17-2024 at 09:40 PM. |
05-18-2024, 08:05 AM | #2 |
Drives: 2015 Z/28 #0058 Join Date: Apr 2018
Location: Pittsburgh, PA
Posts: 823
|
https://www.camaro5.com/forums/showt...light=Splitter
https://www.camaro5.com/forums/showt...=423727&page=3
__________________
Current:
- '15 Z/28 #0058 | White | A/C | Speakers | Michelin PS4S 305/30/19's - '22 Ridgeline RTL | White | Ebony, '22 CR-V EX-L Hybrid | White | Ebony Sold: - '15 Z/28 #0048 | White | A/C | Speakers | Michelin PS4S 305/30/19's https://www.instagram.com/__jon__athan__/ |
05-18-2024, 05:44 PM | #3 |
Camaro Addiction
Drives: 68SS81Z2887IROC97Z28SS,12ZL1,22ZLE Join Date: Dec 2009
Location: Baton Rouge, LA
Posts: 341
|
Yeah the stickler mounting points were two screws that hold the splitter ends near the front wheel opening - 2 on each side that are behind the fender well. Happy to report there is no double sided tape to deal with; just many, many screws and bolts.
__________________
ZL1....thank you Chevy Gods!
2012 Camaro ZL1 VIN #0004 ZL1, Ashen Grey, Black Leather, 6 speed, suede, exposed carbon fiber weave, gray stripe Current Status: Cruisin' !! 3800 Produced: 1/27/2012 6000 Delivered To Customer: 4/27/2012 |
|
|
|
|