09-28-2020, 05:13 AM | #1 |
Drives: Camaro 2017 Join Date: Sep 2020
Location: Seattle
Posts: 1
|
2010 Camaro SS open air intake problem
I recently put an open air intake on my SS. Traction control lights and engine light come on now. After a couple minutes of driving traction control lights turn off but engine light stays on. After driving a little better for a couple minutes the engine light flashes and the other traction control lights come back on and the process starts all over. Any ideas?
|
09-28-2020, 06:10 AM | #2 |
Drives: 2011ss/rs camaro Join Date: Sep 2011
Location: florida
Posts: 1,261
|
What’s an open air intake?
__________________
. OBX LTH,Rotofab,Magnuson Heartbeat.AEM wideband, HP Tuners
|
09-28-2020, 11:45 AM | #3 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,731
|
Traction control/ABS messages are the GenVs way of saying weird shit is happening. Double check your work and look for something you might have pulled or left loose. I would pay particular attention to the MAF, TPS or that temp sensor by cyl 1.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
09-28-2020, 05:06 PM | #4 |
Drives: 2010 CGM 2SS/RS LS3 Swapped A6 Join Date: Sep 2016
Location: Spring Hill, FL
Posts: 4,570
|
If this is just a cheapo universal type CAI kit you installed then its likely throwing codes because of MAF sensor placement or a vacuum leak after the MAF (unmetered air).
What exactly did you install?
__________________
2010 CGM Camaro 2SS LS3 Swapped A6 - GPI LS3 SS1 .647/.638, (224/237, 112 +4, 7º overlap) on CamMotion 8620 core, BTR Platinum .660" Dual Spring kit w/titanium retainers, CHE bronze trunnion upgrade, stock heads milled @ .015, Melling HV 10296 oil pump, TSP 1-7/8" long tube headers (W/Catless Off-road Pipes), Corsa Xtreme 3" Catback, GPI Ported/Rod Mod Intake, Stage 2 Ported Throttle Body, Vararam OTR CAI, Mike Norris Gen 2 catch can + GM 1LE clean side separator, 160º thermostat - Megan Racing adjustable coilovers (lowered 1.75"), MRR M017 10/11" wheels-Tuned by Ryan @ GPI
|
09-28-2020, 05:50 PM | #5 |
Drives: 2013 Triple Black ZL1 Vert M6 ECF Join Date: Mar 2011
Location: Trenton, Michigan
Posts: 7,047
|
Did ytou by any chance move the chassis ground cable when installing it?
|
09-30-2020, 04:21 PM | #6 |
Banned
Drives: 2015 Camaro Join Date: Aug 2018
Location: My Garage
Posts: 1,125
|
The MAF sensor may need a reducer if the intake tube is too big.
|
|
|
|
|