WTS: 2 x Weld RTS 17 x10 with 28-10-17 Hoosier Slicks

[2012BLKSS]

Going with 15' setup.

Only 8 passes. Plenty of meat left.

$1000 2xWheels with 2xTires.

Will not ship, however will drive up to 50-60 miles within 60193.

[flyer08]

Change your mind on shipping let me know

[luckynuts]

Port Huron Michigan is exactly halfway between us if you want to expand the 60 mile radius.

[nos6877]

I'll take them if u will ship to 38118

[2012BLKSS]

TTT no shipping.

[2012BLKSS]

TTT

[65special]

Shipping wheels is not as bad as you think! I was on the same page as you till i shipped out a couple of sets out my self;
-first cut two 24" circles out of an old blanket or something that will protect the face of the rim, then tape in place with box tape.
-two cut four 24" circles out of cardboard, two medium size boxes should do, tape in place as well using box tape.
-and finally when you go to UPS or FEDEX or USPS ask them to wrap them in 10" or so plastic, or ask them for the roll and do it your self, really it's not a big deal, they may charge you a couple of buck for the plastic wrap.
-in the end shipping is a buck a pound regardless of destination +/- so don't mess around with giving guys shipping quotes, that could also be an issue with shipping things???


Question please, do they come with sensors?

[2012BLKSS]

I've shipped plenty of wheels before, and exactly how you described. If it doesn't sell locally in a week I may change my mind.

Yes sensors are included and are working.

[65special]

Originally Posted by 2012BLKSS

I've shipped plenty of wheels before, and exactly how you described. If it doesn't sell locally in a week I may change my mind.

Yes sensors are included and are working.

ops forgot! i know you can use your stock lug nuts too but you have the welds ones or open ended?
and are you using bmr or stock lca's?
if stock lca's, did they ever rub or make contact with the rim?

thanks again
Steven

[65special]

No answer, are they stupid questions?

Originally Posted by 65special

ops forgot! i know you can use your stock lug nuts too but you have the welds ones or open ended?
and are you using bmr or stock lca's?
if stock lca's, did they ever rub or make contact with the rim?

thanks again
Steven

[Mikes fast ss]

Originally Posted by 65special

No answer, are they stupid questions?

He barely gets on this site go easy on him. lol

He's a rock solid guy and I would buy from him with confidence.

I'm sure that he will answer when he pops back on.

[2012BLKSS]

Hey , nope good questions, I have the gorilla lugs forgot the P/N but will search for it, I have the bill here some where.

I have the stock LCA and there was no rubbing, I believe if you go with 16" you will have issues and will most definitely need to mod the LCA

Pics of my rear mounted DRs (17x10) with the Gorilla Lugs.

[2012BLKSS]

top

[Pro Stock John]

I shared the link with a few local friends, where you located?