*Exhaust Install* I know this is last minute, but... - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

CamaroCowboy · 05-07-2010, 01:04 PM

Heck yea man do it yourself. You will feel so much better about it knowing you installed it. I have installed every upgrade to my car so far and up next is my Hurst Short Throw.....

mikey8 · 05-07-2010, 01:08 PM

Do it bro! I used my Rhino Ramps from Pep Boys. No jack, no stands. Back it on the ramps, and have fun. It really is that easy.

Steve@AandACorvette · 05-07-2010, 01:23 PM

you could call...

East Texas Muscle Cars
5917 McCann Rd
Longview, TX 75605
903-686-0456

EnglandGreen Corp.
3135 Fall Street
Houston, Texas 77054
281 464 2800

Late Model Racecraft
6529 Cunningham Rd. Ste 2301
Houston,TX 77041
713-466-9900

Dave2SSRS · 05-07-2010, 03:29 PM

Quote:

Originally Posted by Steve@AandACorvette

you could call...

East Texas Muscle Cars
5917 McCann Rd
Longview, TX 75605
903-686-0456

EnglandGreen Corp.
3135 Fall Street
Houston, Texas 77054
281 464 2800

Late Model Racecraft
6529 Cunningham Rd. Ste 2301
Houston,TX 77041
713-466-9900

Not exactly what I had in mind.. but thank you for taking the time!

I was thinking more along the lines of, help me please and here is a case of beer!!

LOL!

caverman · 05-07-2010, 04:11 PM

Dude...you can do it. Put some WD-40 on the rubber hangers to help get them off. The bolts are 15mm and you can loosen and tighten by hand. Getting the stock exhaust off will probably be the harder thing to do.

Save yourself the money and build up you confidence by DIY. An extra set of hands can definately help but not absolutely necessary. Go call your friends and tell them you're buying beer and pizza.

If you were in my area I would help you out with both the lift and getting it installed. Unfortunately I'm probably 4.5 hrs away.

Steve@AandACorvette · 05-07-2010, 05:43 PM

Quote:

Originally Posted by Dave2SSRS

Not exactly what I had in mind.. but thank you for taking the time!

I was thinking more along the lines of, help me please and here is a case of beer!!

LOL!

Ahhh gotcha... I work for beer, but Im a little far away....

*Camaro_Corvette* · 05-07-2010, 05:52 PM

I also work for beer, sadly you are very very far away

Dave2SSRS · 05-07-2010, 09:46 PM

haha! Beer is such a great motivator! It works so well, Especially here in Texas!! LOL!

Scrappy Doo · 05-08-2010, 01:06 PM

Me and buddy did mine in an hour or so with a floorjack. factory is 2 clamps and 4 hangers, magnaflow is 4 clamps and the hangers. It is a joke.

v6sonoma · 05-08-2010, 01:46 PM

Do it yourself! Catbacks are super easy. Plus the cash you save can go to buy other toys!

third1 · 05-08-2010, 11:48 PM

I did my solo with 4 stands... easy and you will know it's done to your liking

Cajundude@EnglandGreen · 05-12-2010, 09:41 PM

Quote:

Originally Posted by Steve@AandACorvette

Ahhh gotcha... I work for beer, but Im a little far away....

Yo' Steve, Jack Daniels here, maybe a good single malt? BTW, when are you delivering the pizza?

05-07-2010, 01:08 PM	#16
mikey8 Drives: 2019 SS 1LE Join Date: Dec 2009 Location: Winter Garden, FL Posts: 549	Do it bro! I used my Rhino Ramps from Pep Boys. No jack, no stands. Back it on the ramps, and have fun. It really is that easy. __________________

05-07-2010, 04:11 PM	#19
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	Dude...you can do it. Put some WD-40 on the rubber hangers to help get them off. The bolts are 15mm and you can loosen and tighten by hand. Getting the stock exhaust off will probably be the harder thing to do. Save yourself the money and build up you confidence by DIY. An extra set of hands can definately help but not absolutely necessary. Go call your friends and tell them you're buying beer and pizza. If you were in my area I would help you out with both the lift and getting it installed. Unfortunately I'm probably 4.5 hrs away. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

05-07-2010, 05:52 PM	#21
Camaro_Corvette 36.58625, -121.7568 Drives: Team 1LE Join Date: Mar 2008 Location: Earth Posts: 23,709 View My Garage	I also work for beer, sadly you are very very far away __________________ I am seriously never serious vv V vv Next order of business

05-07-2010, 09:46 PM	#22
Dave2SSRS Drives: 2010 Camaro 2SS/RS Join Date: Mar 2010 Location: Houston, TX Posts: 487	haha! Beer is such a great motivator! It works so well, Especially here in Texas!! LOL! __________________ 2010 Camaro 2SS/RS Imperial Blue \| Grey two-tone Interior \| Silver racing stripes \| Magnaflow Comp Cat-back \| CAI intake \| Elite Engineering Tunnel Brace \| Richmond (Houston), TX

05-08-2010, 01:46 PM	#24
v6sonoma Drives: 2010 SS RS Join Date: Jun 2009 Location: Providence, RI Posts: 8,108 View My Garage	Do it yourself! Catbacks are super easy. Plus the cash you save can go to buy other toys! __________________ Mods: BBK Intake, BBK LT's and High Flow Cats, Corsa Cat-back exhaust, Hurst short throw shifter, SLP skip-shift eliminator. 7/1/09 Placed order for IOM/IO int/ SS/RS 6M 9/26/09 Took delivery!

05-07-2010, 01:04 PM	#15
CamaroCowboy Drives: 2013 Chevy Truck Join Date: Mar 2010 Location: Copperas Cove, Texas Posts: 1,782 View My Garage	Heck yea man do it yourself. You will feel so much better about it knowing you installed it. I have installed every upgrade to my car so far and up next is my Hurst Short Throw.....

05-07-2010, 01:23 PM	#17
Steve@AandACorvette Drives: Cars Join Date: Aug 2009 Location: SoCal Posts: 149	you could call... East Texas Muscle Cars 5917 McCann Rd Longview, TX 75605 903-686-0456 EnglandGreen Corp. 3135 Fall Street Houston, Texas 77054 281 464 2800 Late Model Racecraft 6529 Cunningham Rd. Ste 2301 Houston,TX 77041 713-466-9900

05-08-2010, 01:06 PM	#23
Scrappy Doo Drives: Callaway Rogue Join Date: Jul 2009 Location: W8n 4 Snow, Minnesota Posts: 4,738	Me and buddy did mine in an hour or so with a floorjack. factory is 2 clamps and 4 hangers, magnaflow is 4 clamps and the hangers. It is a joke.

05-08-2010, 11:48 PM	#25
third1 speed freak Drives: 2015i Cadillac Escalade,10 IOM 2ss Join Date: Jun 2009 Location: Neenah Wi Posts: 1,143 View My Garage	I did my solo with 4 stands... easy and you will know it's done to your liking __________________ Current:2015i Cadilac Escalade,2016 Lexus RC350,2011 CVO StreetGlide cammed,tuned & loud. 2010 IMO/IO,custom stripes,GFX,sunrf,solo exhaust,JBA shorties,rotofab,Jannetty tune,Pfadt,JLw6 Audison&Hertz,7/4/09 2GIFKIEJ6A9123779Del 7/10/09 Former Camaros 72 LT1 Z28, 86 z28 [SIGPIC]

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Some parents are Dumb, but wait a minute here comes the grandparents.	Camaro_Corvette	Off-topic Discussions	29	10-23-2010 12:54 PM
Last minute meet up in Austin? Interested?	Dforce0990	USA - Texas	59	04-03-2010 11:48 AM
My Camaro in the snow....it was clean for a minute	Medic726	Camaro Photos \| Spyshots \| Video \| Media Gallery	10	02-25-2010 06:21 PM
Last Minute Gift Ideas At Great Prices	rt66	Wash/Wax/Detailing and Cosmetic Maintenance Parts	1	12-16-2009 11:54 AM
Last minute presidential candidate inclusion. He gets my vote.	Mindz	Off-topic Discussions	15	12-14-2007 12:46 PM