Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com
 
Bigwormgraphix
Go Back   Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums - Camaro5.com > Engine | Drivetrain | Powertrain Technical Discussions > Forced Induction - V8


Reply
 
Thread Tools
Old 05-09-2020, 10:22 AM   #1
eLeSthree

 
Drives: 2011 Camaro SS 6sp
Join Date: Nov 2016
Location: Drivers Seat
Posts: 1,902
Maxed out another set of injectors. Time for Bosch 210's?

Looking at logs from the stock ls3 and G3X combo, it looks like I will need more Fuel injector with the 427 and G4X blower combo. This will be my third time upgrading injectors, and I want it to be the last.

I've read a lot about the Bosch 210 injectors and it seems guys are using the injector data from ID2000's and having good success. The only problem I've found is people seem to have trouble getting them to idle perfect with regular pump 91/93 octane. However, with E85, they do well. I only run E85, so I won't encounter that problem.

1. Anyone here running them?
2. Are you on the stock ECM?
3. Where did you buy them from?
4. Which data did you use?
5. Does anyone sell them flow matched?

EDIT: Currently running FIC1300
Attached Images
 
__________________
2011 Camaro SS---SOLD
TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Pro Flo XT, 1158whp 1017wtq.

2010 CTS-V A6 - "Stock"
eLeSthree is offline   Reply With Quote
Old 05-09-2020, 12:46 PM   #2
RupertPupkin

 
Drives: 2014 Camaro SS 1Le
Join Date: Feb 2016
Location: IL
Posts: 1,580
Quote:
Originally Posted by eLeSthree View Post
Looking at logs from the stock ls3 and G3X combo, it looks like I will need more Fuel injector with the 427 and G4X blower combo. This will be my third time upgrading injec e tors, and I want it to be the last.

I've read a lot about the Bosch 210 injectors and it seems guys are using the injector data from ID2000's and having good success. The only problem I've found is people seem to have trouble getting them to idle perfect with regular pump 91/93 octane. However, with E85, they do well. I only run E85, so I won't encounter that problem.

1. Anyone here running them?
2. Are you on the stock ECM?
3. Where did you buy them from?
4. Which data did you use?
5. Does anyone sell them flow matched?

EDIT: Currently running FIC1300
Doubt it...
__________________
2014 SS 1LE Money Pit/ Forged 402
CAM 22X/24X, .619/.617, 113 LSA/ LS9 Heads
FIC 1200cc/DSX Aux Pump//McLeod RXT Clutch
730whp: 630Trq
RupertPupkin is offline   Reply With Quote
Old 05-09-2020, 02:21 PM   #3
ttshovel

 
ttshovel's Avatar
 
Drives: 12 camaro ss, 72 chevelle, 91camaro
Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
Yes sir. Used one set on my last setup on strictly pump e85. Tons of injector left.

Currently have 2 bosch 210s per cylinder now with alcohol on the same sbe 6.0. I have them both wired to the same driver so they will fire together. I will be starting it up this week and don't suspect ill have any issues
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
ttshovel is offline   Reply With Quote
Old 05-09-2020, 10:10 PM   #4
eLeSthree

 
Drives: 2011 Camaro SS 6sp
Join Date: Nov 2016
Location: Drivers Seat
Posts: 1,902
Quote:
Originally Posted by ttshovel View Post
Yes sir. Used one set on my last setup on strictly pump e85. Tons of injector left.

Currently have 2 bosch 210s per cylinder now with alcohol on the same sbe 6.0. I have them both wired to the same driver so they will fire together. I will be starting it up this week and don't suspect ill have any issues
Correct me if I am wrong, but i thought you ran an aftermarket ecm. No? Where did you buy yours? Im trying to avoid knock offs.

Thanks
__________________
2011 Camaro SS---SOLD
TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Pro Flo XT, 1158whp 1017wtq.

2010 CTS-V A6 - "Stock"
eLeSthree is offline   Reply With Quote
Old 05-10-2020, 04:12 AM   #5
ttshovel

 
ttshovel's Avatar
 
Drives: 12 camaro ss, 72 chevelle, 91camaro
Join Date: Dec 2013
Location: findlay,oh
Posts: 2,069
Quote:
Originally Posted by eLeSthree View Post
Correct me if I am wrong, but i thought you ran an aftermarket ecm. No? Where did you buy yours? Im trying to avoid knock offs.

Thanks
Yes I'm using ms3 but there's no reason they can't idle nice on a 427 With a stock ecm

And vs racing to avoid knockoffs
__________________
12 camaro ss 427lsx, th400, f310 heads, crower shaft mounts, gpi specd solid roller, shearerfab 2k hp a/w, twin bullseye 88mm turbos, hughes pro ssx bolt together converter, holley dominator, 8.50 cert, backhalf, Ford 9", 33x17x16 tires, c16 fuel
ttshovel is offline   Reply With Quote
Old 05-11-2020, 12:57 PM   #6
granatl
 
granatl's Avatar
 
Drives: 2SS RS ABM A6
Join Date: Jun 2010
Location: Pahrump, NV
Posts: 273
First, my car has been down a long time. I start it every so often to cycle oil through it, but that's it.

I think I have the FIC 2100's and e85.

I've monkeyed with the idle off & on for a long time, so this is what I recall.

The min injector pulse has steps. At one step, the car starts and idles okay, but is actually rich (.85 lambda comes to mind)

The next step down the car runs at stoich, but then suddenly goes inexplicably lean.

So, if I were to take the time to fix my MAF/MAP values, I think it would idle just fine on that large of an injector. I have the FF sensor, so I suspect it wouldn't make any difference what fuel I'm using.

In short, it's ultra-sensitive to tuning. Injectors are usually 3+ms (roughly), but these have to run at .3ms (1/10 of normal) and still seem to handle it. I'm not sure if they'll handle .2ms though.
__________________
Jack Bilger
granatl is offline   Reply With Quote
Old 05-11-2020, 03:46 PM   #7
RyangAsh
 
Drives: 2014 ZL1
Join Date: Apr 2018
Location: KCMO
Posts: 180
I see 80 percent DC, that's not maxed out...or am I missing something? Edit, nvm!!!!!! lol
RyangAsh is offline   Reply With Quote
Old 05-11-2020, 04:50 PM   #8
eLeSthree

 
Drives: 2011 Camaro SS 6sp
Join Date: Nov 2016
Location: Drivers Seat
Posts: 1,902
Quote:
Originally Posted by LS_What View Post
I have a LSX 427 with twin 68's. I'm running a ProEFI with the bosch 210's on E85. This pull was only 17psi and with traction control activated it only had 5* total timing...
IDC 48%
Quote:
Originally Posted by LS_What View Post
It's good practice not to exceed 85% IDC..
I've no doubt they're big enough. I just dont know if I can get them to behave with the stock ECM and HPTuners. I can handle some tuning, but it's not worth it, if its a never ending problem and driveability sucks.
__________________
2011 Camaro SS---SOLD
TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Pro Flo XT, 1158whp 1017wtq.

2010 CTS-V A6 - "Stock"
eLeSthree is offline   Reply With Quote
Old 05-11-2020, 09:04 PM   #9
b4wheeler
 
b4wheeler's Avatar
 
Drives: 2011 Camaro 2SS Vert
Join Date: Oct 2015
Location: Cordova, Md
Posts: 585
I am sure it is in this thread somewhere, but did you buy directly from ESS or from JRE
__________________
2011 2SS/RS Convertible, Victory Red, Roto-Fab CAI, Stainless Power 1 7/8 headers, No Cats, Straight piped, Bo White TB, ZL1 CONVERSION, CDC Roll bar and some powder coating and dipping.
b4wheeler is offline   Reply With Quote
Old 05-11-2020, 09:46 PM   #10
eLeSthree

 
Drives: 2011 Camaro SS 6sp
Join Date: Nov 2016
Location: Drivers Seat
Posts: 1,902
Quote:
Originally Posted by b4wheeler View Post
I am sure it is in this thread somewhere, but did you buy directly from ESS or from JRE
Are you talking about the ESS kit? If so, I bought from ESS, but Ted handled my last tune. Looking for info on the bosch 210s tho.
__________________
2011 Camaro SS---SOLD
TMS Dart 427 FED M311s, ESS Tuning G4 Blower, DSX Triple FP Assembly, DSX FF, FIC1300, Mcleod RXT 1200HD, Pro Flo XT, 1158whp 1017wtq.

2010 CTS-V A6 - "Stock"
eLeSthree is offline   Reply With Quote
Old 05-11-2020, 10:02 PM   #11
b4wheeler
 
b4wheeler's Avatar
 
Drives: 2011 Camaro 2SS Vert
Join Date: Oct 2015
Location: Cordova, Md
Posts: 585
Sorry. Was thinking this was the original thread about the supercharger.
My Bad.
__________________
2011 2SS/RS Convertible, Victory Red, Roto-Fab CAI, Stainless Power 1 7/8 headers, No Cats, Straight piped, Bo White TB, ZL1 CONVERSION, CDC Roll bar and some powder coating and dipping.
b4wheeler is offline   Reply With Quote
Old 05-12-2020, 06:01 AM   #12
1fast
8.60 @ 157 @ 4200lbs
 
1fast's Avatar
 
Drives: 2010 Gen 5
Join Date: Nov 2013
Location: Warrenton, va
Posts: 299
Quote:
Originally Posted by eLeSthree View Post
Looking at logs from the stock ls3 and G3X combo, it looks like I will need more Fuel injector with the 427 and G4X blower combo. This will be my third time upgrading injectors, and I want it to be the last.

I've read a lot about the Bosch 210 injectors and it seems guys are using the injector data from ID2000's and having good success. The only problem I've found is people seem to have trouble getting them to idle perfect with regular pump 91/93 octane. However, with E85, they do well. I only run E85, so I won't encounter that problem.

1. Anyone here running them?
2. Are you on the stock ECM?
3. Where did you buy them from?
4. Which data did you use?
5. Does anyone sell them flow matched?

EDIT: Currently running FIC1300
Yep running them
Yes stock ecu
Bought from fuel injector connection
Data from hours of time tuning
Yes they are matched from fuel injector connection

Their is no real data. being our ecu injector stuff is limited
__________________
2010 camaro twin turbo 8.60 @ 157 full weight 4200
1fast is offline   Reply With Quote
Old 05-12-2020, 06:44 AM   #13
Greenhornet2

 
Greenhornet2's Avatar
 
Drives: 2011 Camaro 2SS LS3 Whipple
Join Date: May 2019
Location: Connecticut
Posts: 1,925
Quote:
Originally Posted by eLeSthree View Post
Are you talking about the ESS kit? If so, I bought from ESS, but Ted handled my last tune. Looking for info on the bosch 210s tho.
Are you planning on tuning with ted again? If so I'd go with what he is used to tuning or at least get his input.
__________________
Whipple 2.9 CAI ID1050x injectors ZL1 Pump JRE FPCM JMS Voltage booster JRE Rough Idle blower cam BTR .660 springs CHE trunnion kit 1 7/8 Speed Engineering Borla Atak JRE scoop 1.5" lowering springs BMR trailing arms and toe links Cradle inserts 704WHP 603WTQ 93 octane
Greenhornet2 is offline   Reply With Quote
Old 05-12-2020, 11:28 AM   #14
RyangAsh
 
Drives: 2014 ZL1
Join Date: Apr 2018
Location: KCMO
Posts: 180
Quote:
Originally Posted by LS_What View Post
It's good practice not to exceed 85% IDC..
Under what conditions? Ever read about some super stock builds? I'll try to find links on spray pattern efficiency, DC, etc...
RyangAsh is offline   Reply With Quote
 
Reply

Thread Tools

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -5. The time now is 02:10 AM.


Powered by vBulletin® Version 3.8.9 Beta 4
Copyright ©2000 - 2024, vBulletin Solutions, Inc.