06-06-2021, 03:44 PM | #1 |
Drives: 2010 ss/rs 6 speed manual Join Date: Aug 2013
Location: Ny
Posts: 584
|
Wtb pass side 2010 seat
Looking to buy passenger side 2010 seat crappier cheaper it is the better I guess I need to steal the sensor out of it off the left rail to use in the recaro seats I got. Only thing I care about so the seat cushions covers can be the worst crap you’ve ever seen lol. Sliders can be junk air bags deployed even (I believe). Let me know what ya got. Close to NY is better to save on shipping but if you’re willing to ship ( shipping just the sensor might be the most logical here Considering I don’t need the actual seat but ya gotta be able to remove that sensor) I am game also.
__________________
2010 camaro ss/rs, standard 6 speed, ls3 motor, bmr subframe connectors, jba 3” competition Exhaust, stainless works 1 7/8" headers, adm cold air intake, hurst short throw shifter, bo white ported tb, mishimoto aluminum radiator, mishimoto oil cooler.
|
06-06-2021, 03:45 PM | #2 |
Drives: 2010 ss/rs 6 speed manual Join Date: Aug 2013
Location: Ny
Posts: 584
|
The pass seat had to be manual sliding seat out of 2010 seats from 2011-15 won’t work
__________________
2010 camaro ss/rs, standard 6 speed, ls3 motor, bmr subframe connectors, jba 3” competition Exhaust, stainless works 1 7/8" headers, adm cold air intake, hurst short throw shifter, bo white ported tb, mishimoto aluminum radiator, mishimoto oil cooler.
|
06-06-2021, 11:41 PM | #3 |
Drives: 2010 Camaro 2SS RS Join Date: Nov 2011
Location: NYC
Posts: 2,387
|
I added recaro to my 2010 a few years ago, you can to it just by adding a pin and wire where necessary in an existing harness, you don't need any sensor or anything
If I can find the thread that helped me I will post it |
06-07-2021, 07:07 AM | #4 |
Drives: 2010 ss/rs 6 speed manual Join Date: Aug 2013
Location: Ny
Posts: 584
|
That would be great.
__________________
2010 camaro ss/rs, standard 6 speed, ls3 motor, bmr subframe connectors, jba 3” competition Exhaust, stainless works 1 7/8" headers, adm cold air intake, hurst short throw shifter, bo white ported tb, mishimoto aluminum radiator, mishimoto oil cooler.
|
06-08-2021, 11:42 AM | #5 |
Drives: 2010 Camaro 2SS RS Join Date: Nov 2011
Location: NYC
Posts: 2,387
|
I stand corrected! looked back at my notes and the thread and it is the track position sensor you need, and then there was the adding a pin to the existing harness that was needed.
Forgot about that part! Anyway, I may have a sensor for you. I parted out some seats a few years ago and made office chairs out of them and I think I might still have the sensor in a box of parts I have to post for sale. I will give it a look and will let you know Anyway, here is the thread... the posts about the wiring modifications start around post 11 or so where the OP is trying to figure out why he is getting an airbag fault https://www.camaro5.com/forums/showthread.php?t=176927 |
06-08-2021, 11:42 AM | #6 |
Drives: 2010 Camaro 2SS RS Join Date: Nov 2011
Location: NYC
Posts: 2,387
|
Might have a correct size pin/ wire for you as well with some old harnesses
|
06-08-2021, 12:06 PM | #7 |
Drives: 2010 ss/rs 6 speed manual Join Date: Aug 2013
Location: Ny
Posts: 584
|
Both of those would be awesome please let me know
__________________
2010 camaro ss/rs, standard 6 speed, ls3 motor, bmr subframe connectors, jba 3” competition Exhaust, stainless works 1 7/8" headers, adm cold air intake, hurst short throw shifter, bo white ported tb, mishimoto aluminum radiator, mishimoto oil cooler.
|
|
|
|
|