01-01-2019, 10:02 PM | #21757 |
LSx FTW!!!
Drives: 2010 Camaro 2SS RS Join Date: Jan 2017
Location: TN
Posts: 767
|
Stage II ProCharger D1X
DSX Tuning auxiliary fuel system New trans speed sensors, filter pan gasket and fluid. Sent from my iPhone using Tapatalk
__________________
2010 2SS RS A6 781rwhp on E85
Stage 2 ProCharger D1X Circle D 3400 Triple Disc Kooks Jet Hot Headers Kooks Full 3in exhaust Trick Flow GenX 255's Polished PAC .660's & Ti-retainers TSP VVT 3.2 cam kit w/DoD Delete Smith Bro's Trunnion kit AEM X-Series OBDII Widebands FIC ID1300x Injectors GM ZL1 High Output Fuel Pump DSX Tuning Flex Sensor DSX Auxiliary Fuel System Tim King Stage 4 Max Effort CTSV 6L90 DSS 1 piece aluminum driveshaft JRE 6L80E / 6L90E Dipstick NGK Iridium IX spark plugs #7 heat range Mighty Mouse Camaro 5 Wild w/-12an and Billet Black HP Tuners VCM Suite Last edited by John_C; 01-02-2019 at 05:39 AM. |
01-02-2019, 04:45 AM | #21758 |
brakes for squirrels
Drives: 2012 45th Anniversary 2SS Join Date: Mar 2018
Location: NW of San Antonio, TX
Posts: 52
|
Yes, there is some drone, but it's still a big improvement over stock.
|
01-02-2019, 11:55 AM | #21759 |
Drives: 2010 Camaro SS/RS - IOM - LS3 Join Date: Aug 2015
Location: Canada
Posts: 302
|
Codiath - by full exhaust you mean headers also? - I am curious as I noted earlier you had to get a fresh DynoSteve tune..
|
01-02-2019, 08:35 PM | #21760 |
brakes for squirrels
Drives: 2012 45th Anniversary 2SS Join Date: Mar 2018
Location: NW of San Antonio, TX
Posts: 52
|
Yes, I installed long tubes, and a Cat back with High flow cats and xpipe. This is why I required a fresh tune. Dynosteve has been a pleasure to work with and gets me updated tunes surprisingly fast.
|
01-02-2019, 09:10 PM | #21761 |
Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
I did some data logging so that DynoSteve can finalize my tune after the recent camshaft install.
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA Last edited by zlathim; 01-04-2019 at 10:07 AM. |
01-02-2019, 09:14 PM | #21762 | |
Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
Quote:
Awesome build!!!!
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
|
01-02-2019, 09:18 PM | #21763 |
Drives: 2010 Camaro 2SS/RS M6 Join Date: May 2009
Location: Idaho
Posts: 726
|
A man after my own heart. Enjoy the TrueTrac and please let us know how you like it. I say that because I did the same mod before I had problems with the stock LSD. Want to hear how your experience pans out since you had trouble with the factory LSD, and I'm curious as to how much improvement you see.
__________________
GPI SS2; EE E2 catch can; SP 1 7/8" LT Headers w/ hfc; FM AT 3" cat-back; CAI Cold Air Intake; AEM Wideband
Tuned by GPI McCleod RXT; MGW flat stick; Ram Clutch slave cylinder & hydraulic adjuster BMR cradle & diff bushings, trailing arms, toe rods & upper control arm bushings Hotchkis sub-frame brace Stop Tech Z-23 brakes 4.10 gears, Eaton Truetrac, LPW diff cover Best 1/4 mile 12.073 @ 115.68 mph 3,300 ft DA |
01-02-2019, 09:27 PM | #21764 | |
LOL I was thinking the same thing.
Quote:
Car only has 38k miles, but I guess I use it hard. Don't see the point otherwise...
__________________
468, Mishimoto rad + oil cooler, TSP LTH
MCS 2WNR CTSV/ZL1 front calipers/rotors + G-Loc Forgestar CF-5 19x11 |
||
01-03-2019, 11:24 PM | #21765 |
Drives: 2014 Camaro RRM 2SS RS, M6 LS3 Vert Join Date: Aug 2015
Location: New Hampshire
Posts: 234
|
Brushed the snow off her
__________________
Dream it - drive it!
|
01-04-2019, 09:37 AM | #21766 |
Instagram: Sangstah
|
Installed some GTS rear tail light covers from a member here, thanks again!
__________________
2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold
Follow the build https://www.camaro6.com/forums/showthread.php?t=612717 |
01-04-2019, 10:55 AM | #21767 |
Drives: 2010 2SS LS3 and 1978 STROKER 383 Join Date: Feb 2018
Location: Czech Republic
Posts: 1,592
|
|
01-04-2019, 06:04 PM | #21768 |
NPP exhaust fuse pull and I poured a bottle of seafoam in the gas tank and filled it up with 93. The exhaust is much smoother but I might eventually put the fuse back in
|
|
01-04-2019, 07:59 PM | #21769 |
Account Suspended
Drives: 2010 Camaro 1SS LS3 Join Date: Jan 2015
Location: Riverside, CA
Posts: 4,018
|
Drove this badass ride to work. Enjoyed every minute of it to and fro...
Yesterday, got stopped by CHP coming back from Covina, coming down I-15. Saw a lane open up for 'bout a half mile and had a little fun. Apparently too much fun for CHP. The guy was really cool and let me go with a warning, asking that I don't make it a bad day for him... apparently he was having a good day. LE has been kind to me these days... |
01-05-2019, 06:52 PM | #21770 |
Drives: 2014 2lt rs Join Date: Nov 2017
Location: georgia
Posts: 90
|
cold air intake
installed this today, was an easy install. looks pretty good.
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
GM memo to dealers | Moose | 5th Gen Camaro SS LS LT General Discussions | 41 | 02-04-2010 07:33 PM |
Major Pedders Event in Houston! Saturday, Jan 30th! Meet DMS | Info@PeddersUSA.com | USA - Texas | 39 | 02-01-2010 12:48 PM |
Answeres to questions I have stumbled on | dieseldave24v | 5th Gen Camaro SS LS LT General Discussions | 13 | 02-23-2009 06:56 PM |