AGP users quarter mile times - Page 3 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

BradySS · 02-21-2017, 06:58 PM

Quote:

Originally Posted by Ls1408cp

Bump for updates....

I'd like an update on this as well if anyone wants to share their setups and times that would be great.

AGP Turbo · 02-21-2017, 07:45 PM

The Canadian guy with the big thread on TH400 swap. Said he ran a mid 9 super easy and should dial in to 8's. That will be our first 8sec Camaro5. This is the most done up 'drag' type car I think we have. All the others are just fast street cars.

I have a M/T guy who hit 9.9x but it took him a while to get there. Interesting he is on SS rear with 3.91's and a trutrac, on 18's. He uses our MPH switch to the boost controller to kick in full power right after the car hit's 3rd.

At least 3 4L80 car's in the 9's but those guys don't even go back to the track anymore. Lot's of that honestly, guys who don't want to put all the safety tech in the cars. Couple guys this forum keep things super down low but are making serious money on the street scene.

Ls1408cp · 02-21-2017, 08:13 PM

Any details on the 9.9 m/t car?

Redlineviper · 02-21-2017, 08:33 PM

I will likely run a 9 on 20's here in a couple weeks. Car has gone 10.30's with a 1.9 60' at 146. Without a progressive boost controller it's tricky to have the right boost in 1-2-3-4 gears.

Ls1408cp · 02-21-2017, 09:18 PM

Quote:

Originally Posted by Redlineviper

I will likely run a 9 on 20's here in a couple weeks. Car has gone 10.30's with a 1.9 60' at 146. Without a progressive boost controller it's tricky to have the right boost in 1-2-3-4 gears.

Are your runs at 21psi max like your dyno? 146 is pretty good

Redlineviper · 02-21-2017, 09:43 PM

Quote:

Originally Posted by Ls1408cp

Are your runs at 21psi max like your dyno? 146 is pretty good

No, that was about 860whp at 18psi. Have not ran on high boost yet. Hoping for around 150mph.

AGP Turbo · 02-22-2017, 08:24 PM

Quote:

Originally Posted by Ls1408cp

Any details on the 9.9 m/t car?

The owner use to be on here. It's a 416, twin disc clutch, stock trans, stock drivesahft, stock SS rear with 3.9'1s and a trutrac. Said he shifts early out of first so it will not hit 2nd too hard. Then right after shifting to third the car goes full boost and runs over 140 traps. Total streetcar on stock shocks, brakes, axles etc. Pump gas 875ish whp.

Mike H · 02-25-2017, 12:14 AM

10.07@137 1.6 sixty at 14psi. Foot brake leaving on 0 pounds. Full weight car

BradySS · 02-25-2017, 03:06 AM

Quote:

Originally Posted by Mike H

10.07@137 1.6 sixty at 14psi. Foot brake leaving on 0 pounds. Full weight car

What's your setup? That's a killer time for leaving with no boost.

hillshooter · 02-25-2017, 10:02 AM

Quote:

Originally Posted by BradySS

What's your setup? That's a killer time for leaving with no boost.

Also would like to know about the setup.

dreksnot · 02-25-2017, 10:25 AM

Quote:

Originally Posted by Mike H

10.07@137 1.6 sixty at 14psi. Foot brake leaving on 0 pounds. Full weight car

Autos kick arse for racing and launching. If one is serious, that's the way to go. Then there's the "cool guys" who think they can launch a manual....

BradySS · 02-25-2017, 11:30 AM

Quote:

Originally Posted by dreksnot

Autos kick arse for racing and launching. If one is serious, that's the way to go. Then there's the "cool guys" who think they can launch a manual....

I know the Canada guy got his to work with the TH400 but I don't think I will be able to fit the kit around this trans brake solenoid?

Mike H · 02-25-2017, 01:33 PM

Quote:

Originally Posted by BradySS

What's your setup? That's a killer time for leaving with no boost.

Forged 370" truck block, prc lsa heads, ljms cam, e85. Agp twin 62mm, Jakes 4l80 w/circle d converter

Car made 844/750 at this boost level but I was blowing through the converter. Only made 1 pass which was the 10.07. Have a new converter this year so plan to go sub 9.50s off the Trans brake/2 step full weight. New converter is a triple disc so the mph should increase significantly.

Ls1408cp · 02-25-2017, 02:16 PM

I could tell from your other post with your slip that your converter had a lot of slip. What 62mm turbos?

02-21-2017, 08:13 PM	#31
Ls1408cp Drives: 14 1le turbo Join Date: Oct 2015 Location: Ofallon Mo Posts: 159	Any details on the 9.9 m/t car? __________________ 2014 1LE 2SS/RS Huron Speed turbo kit

02-21-2017, 08:33 PM	#32
Redlineviper Drives: 2013 ZL1 Join Date: Jan 2015 Location: Orlando Posts: 936	I will likely run a 9 on 20's here in a couple weeks. Car has gone 10.30's with a 1.9 60' at 146. Without a progressive boost controller it's tricky to have the right boost in 1-2-3-4 gears. __________________ 2013 A6 ZL1

02-25-2017, 02:16 PM	#42
Ls1408cp Drives: 14 1le turbo Join Date: Oct 2015 Location: Ofallon Mo Posts: 159	I could tell from your other post with your slip that your converter had a lot of slip. What 62mm turbos? __________________ 2014 1LE 2SS/RS Huron Speed turbo kit

02-21-2017, 07:45 PM	#30
AGP Turbo Drives: All things Turbocharged Join Date: Dec 2010 Location: AZ Posts: 1,199	The Canadian guy with the big thread on TH400 swap. Said he ran a mid 9 super easy and should dial in to 8's. That will be our first 8sec Camaro5. This is the most done up 'drag' type car I think we have. All the others are just fast street cars. I have a M/T guy who hit 9.9x but it took him a while to get there. Interesting he is on SS rear with 3.91's and a trutrac, on 18's. He uses our MPH switch to the boost controller to kick in full power right after the car hit's 3rd. At least 3 4L80 car's in the 9's but those guys don't even go back to the track anymore. Lot's of that honestly, guys who don't want to put all the safety tech in the cars. Couple guys this forum keep things super down low but are making serious money on the street scene.

02-25-2017, 12:14 AM	#36
Mike H Drives: 2015 camaro ss Join Date: Apr 2015 Location: Beggs, ok Posts: 87	10.07@137 1.6 sixty at 14psi. Foot brake leaving on 0 pounds. Full weight car