Havoc Diffuser with GFX or ACS T2 front? - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

joefresh22 · 10-21-2012, 07:08 PM

I know I am definitely purchasing the Havoc diffuser, but i was wondering which front chin spoiler would look good with the Havoc! I know Havoc has its own but I don't like the design of it.

usafboy · 10-21-2012, 08:34 PM

Personally I like the GFX the most. But get what you think looks good

joefresh22 · 10-23-2012, 09:32 PM

Its a hard decision im doing countless research and looking up prices for both! Trying to find a vendor on here would be helpful

usafboy · 10-23-2012, 09:42 PM

Becky at Rodgers Chevrolet could prolly help you. That's who a lot of ppl on here recommend.

ZL-Bee · 10-23-2012, 10:18 PM

I'd suggest the ACS T2 front Splitter w/ Havoc Sides & Havoc Diffuser.

Buffnshine · 10-23-2012, 10:55 PM

i think the SLP looks the best

joefresh22 · 10-25-2012, 12:26 PM

Quote:

Originally Posted by ZL-Bee

I'd suggest the ACS T2 front Splitter w/ Havoc Sides & Havoc Diffuser.

I think i may go with that because of the price as well! I was looking into the high wing or the low profile wing that Rideskinz is coming up with! Thanks for the input!

joefresh22 · 10-25-2012, 12:27 PM

Quote:

Originally Posted by Buffnshine

i think the SLP looks the best

Hows the install on that?

Buffnshine · 10-29-2012, 01:59 AM

very simple and secure screwed in all hardware included

hrpiii · 10-29-2012, 08:08 AM

I have the Havoc Diffusor and the RPI splitter. The RPI's is very very very similar to the SLP splitter. Installation is not difficult at all, did it on jack stands.

Cmlloveless · 10-29-2012, 08:55 AM

One not mentioned that I think looks great is the Revolution chin spoiler. It goes on really easy! That is what I have on mine with the Havoc "CDC" rear diffuser as well as Razzi side skirts.

joefresh22 · 10-29-2012, 09:55 PM

I made my decision to choose the ACS t2 splitter and pair with the havoc diffuser! Also, rideskinz is coming out with a low profile wing that i would love to set up with my car!

Wolfco13 · 10-31-2012, 01:37 AM

Quote:

Originally Posted by Cmlloveless

One not mentioned that I think looks great is the Revolution chin spoiler. It goes on really easy! That is what I have on mine with the Havoc "CDC" rear diffuser as well as Razzi side skirts.

Sounds cool, but your garage needs pics!

dangjohnny · 10-31-2012, 01:42 AM

Look at as many pics as you can then get what you found to look the best.

10-21-2012, 07:08 PM	#1
joefresh22 Drives: 2012 2LT/RS Crystal Red Join Date: Jul 2012 Location: New York Posts: 160 View My Garage	Havoc Diffuser with GFX or ACS T2 front? I know I am definitely purchasing the Havoc diffuser, but i was wondering which front chin spoiler would look good with the Havoc! I know Havoc has its own but I don't like the design of it.

10-21-2012, 08:34 PM	#2
usafboy Drives: 2010 Silver SS/RS LS3 Join Date: Nov 2011 Location: Colorado Springs, CO Posts: 882	Personally I like the GFX the most. But get what you think looks good __________________ 2010 Silver Ice Metallic Camaro SS/RS LS3 Mods...so far: resonator/muffler delete, tinted everything, '13 shift knob/boot, bowtie delete, PFADT sway bars, CAI intake, Hurst short shifter, JBA cat deletes, BMR trailing arms/outer bushings/steering rack bushing, Bo White ported TB. Rhino79 Dyno tuned...405 HP/399 TQ

10-23-2012, 09:42 PM	#4
usafboy Drives: 2010 Silver SS/RS LS3 Join Date: Nov 2011 Location: Colorado Springs, CO Posts: 882	Becky at Rodgers Chevrolet could prolly help you. That's who a lot of ppl on here recommend. __________________ 2010 Silver Ice Metallic Camaro SS/RS LS3 Mods...so far: resonator/muffler delete, tinted everything, '13 shift knob/boot, bowtie delete, PFADT sway bars, CAI intake, Hurst short shifter, JBA cat deletes, BMR trailing arms/outer bushings/steering rack bushing, Bo White ported TB. Rhino79 Dyno tuned...405 HP/399 TQ

10-23-2012, 10:55 PM	#6
Buffnshine So Cal Camaro5 Race Team Drives: '10 SS/RS, '06 HHR, '70 El Camino Join Date: Sep 2009 Location: Huntington Beach, CA Posts: 2,589 View My Garage	i think the SLP looks the best __________________ TEAM L99 - So Cal Camaro5 Race Team #27 9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels

10-29-2012, 01:59 AM	#9
Buffnshine So Cal Camaro5 Race Team Drives: '10 SS/RS, '06 HHR, '70 El Camino Join Date: Sep 2009 Location: Huntington Beach, CA Posts: 2,589 View My Garage	very simple and secure screwed in all hardware included __________________ TEAM L99 - So Cal Camaro5 Race Team #27 9/5/09 Purchased #36962 Black 1SS/RS L99 "E-TCKT" Base Dyno 328hp/341tq @BBK meet Mods to Date: Window Tint 5% & 15%, ACC P13W Lighting, Adaptive DRL Harness, Ghost Armor, Lloyds "SS" Mats, Dash Plaque, Flowmaster Outlaw Exhaust, Drake Front Bowtie Delete, Stealth 3457 Chrome/Mirror Signal Bulbs, Grant Revolutions Steering Wheel, PFADT Sport Springs, Sway Bars, End Links, Trailing Arms, 4 Wheel Alignment, Hurst Auto Shifter and Paddle Shifter, Satin Black Rear Tail Light Bezels

10-23-2012, 09:32 PM	#3
joefresh22 Drives: 2012 2LT/RS Crystal Red Join Date: Jul 2012 Location: New York Posts: 160 View My Garage	Its a hard decision im doing countless research and looking up prices for both! Trying to find a vendor on here would be helpful

10-23-2012, 10:18 PM	#5
ZL-Bee Account Suspended Drives: 2010 Camaro 2SS/RS Join Date: Sep 2012 Location: York, PA Posts: 576	I'd suggest the ACS T2 front Splitter w/ Havoc Sides & Havoc Diffuser.

10-29-2012, 08:08 AM	#10
hrpiii AKA "Beefcake" Drives: 2023 ZL1 Sharkskin Join Date: Oct 2009 Location: Indy Posts: 8,529	I have the Havoc Diffusor and the RPI splitter. The RPI's is very very very similar to the SLP splitter. Installation is not difficult at all, did it on jack stands.

10-29-2012, 08:55 AM	#11
Cmlloveless Drives: 2010 2SS RS Join Date: Jul 2009 Location: Winchester, Ca Posts: 957 View My Garage	One not mentioned that I think looks great is the Revolution chin spoiler. It goes on really easy! That is what I have on mine with the Havoc "CDC" rear diffuser as well as Razzi side skirts.

10-29-2012, 09:55 PM	#12
joefresh22 Drives: 2012 2LT/RS Crystal Red Join Date: Jul 2012 Location: New York Posts: 160 View My Garage	I made my decision to choose the ACS t2 splitter and pair with the havoc diffuser! Also, rideskinz is coming out with a low profile wing that i would love to set up with my car!

10-31-2012, 01:42 AM	#14
dangjohnny Drives: ‘21 ZL1 1LE 6MT Join Date: Jul 2012 Location: Floribama Posts: 622	Look at as many pics as you can then get what you found to look the best. __________________ ZL1 1LE Black - 6MT - PDR - Nav - Michelin PS4s