09-18-2011, 09:40 PM | #1 |
SS #2431
Drives: 2001 Pewter Camaro SS Join Date: Jul 2009
Location: Missoula, MT
Posts: 1,224
|
suspension / rear noise
Alright, so within the last month I've noticed a really high pitched noise coming from what sounds like my rear suspension. it usually happens when I first start to accelerate and recently it was squeeking continuously sounded like it was bouncing for lack of a better word started at about 50 MPH. If anyone has any ideas I'd appreciate that.. I'm taking her on my first road trip this Friday so I want to know if i should be worried
__________________
2001 SS Lid, LT's, 3" Y to 4" Borla XR-1 dumped, LCA, LCA Brackets, Dbl. Adj. Panhard, Subframe Connectors, Shock Tower Brace, Eibach Prokit, Eddlebrock Shocks, C6 ZR1 Wheels 18x9.5 |
09-19-2011, 05:59 AM | #2 |
|
if you hear a clunk sound when you start to accelerate it is probably a universal joint.
|
09-19-2011, 01:32 PM | #3 |
Drives: GM Vehicles Join Date: Jun 2010
Location: Michigan
Posts: 9,328
|
If you think there might be an issue I would suggest having the vehicle checked out to make sure it has a clean bill of health before going on that long trip. Hopefully it is something minor and you can get back on the road to enjoy your trip! Let us know how it goes if you do decide to take your vehicle in.
Jeff Morris, Chevrolet Customer Service |
09-19-2011, 02:15 PM | #4 |
Gunning for Sixth
Drives: '03 ZR2 Blazer Join Date: Sep 2008
Location: Woodhaven, Michigan
Posts: 9,358
|
Like a bedspring squeak? If I'm reading it right you have it gear (drive) and pull away; it starts squeaking. Then it really picks up above 50?
Is it cyclic like you can count the squeaks as if they were a second hand on a clock? If so I think it could be brakes. Does it happen when you decelerate or brake? What about in turns? Braking in turns? I'd find a hill and coast in neutral to see just what it could be. I know that's how I found out I have a failing rear U joint and pinion shaft/bearing.. pretty much my whole diff is f'ked. |
09-19-2011, 02:55 PM | #5 |
|
i know i pick on you about your exhaust but ...it could be a loose exhaust part also.
|
09-19-2011, 03:08 PM | #6 |
Don't Like it? Suggit.
|
Kind of a sporadic, high pitch, vibrato kind of squeak right? Right as you begin to accelerate, and sometimes upon decel/downshift? Loud enough for the car in the next lane to hear?
__________________
"Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp |
09-19-2011, 03:19 PM | #7 |
|
could be the beer cans that Revo and I left in your wheels also...
|
09-19-2011, 03:54 PM | #8 |
Butter Bar!
Drives: 2011 SS, 1998 Trans Am Join Date: Dec 2010
Location: Patrick AFB, FL
Posts: 1,364
|
Sounds kinda like brakes to me.
__________________
2011 Camaro SS, White/Orange, LSR Short Throw, CAI
1998 Trans Am, Red, H/C/I, 3200 CircleD Stall, full suspension 2004 GSXR 1k, Matt Mladin Edition |
09-19-2011, 04:20 PM | #9 | |
SS #2431
Drives: 2001 Pewter Camaro SS Join Date: Jul 2009
Location: Missoula, MT
Posts: 1,224
|
Quote:
When I'm in neutral theres nothing. when I am going 50ish its constant but low pitched, when I give it any throttle it gets louder though. usual not when I brake, however sometimes when I downshift.
__________________
2001 SS Lid, LT's, 3" Y to 4" Borla XR-1 dumped, LCA, LCA Brackets, Dbl. Adj. Panhard, Subframe Connectors, Shock Tower Brace, Eibach Prokit, Eddlebrock Shocks, C6 ZR1 Wheels 18x9.5 |
|
09-19-2011, 04:48 PM | #10 |
Don't Like it? Suggit.
|
That is a distinct possibility
__________________
"Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp |
09-19-2011, 04:53 PM | #11 |
Don't Like it? Suggit.
|
Sounds like your fuel pump... From what I'm told, the pump assemblies sometimes rattle inside the tank. As far as I know, all you can do is change the pump and hope you get a good one :/
__________________
"Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp Last edited by Revo1; 09-19-2011 at 06:25 PM. |
09-19-2011, 05:38 PM | #12 | |
Drives: 2005 Infiniti G35 Join Date: Jan 2011
Location: Carrollton, TX
Posts: 390
|
Quote:
edit: I'm pretty sure the noise was constant as soon as I began moving but this was about 4 years ago so it's hard to remember. |
|
09-19-2011, 08:12 PM | #13 |
Drives: 2000 Z28 M6 Join Date: May 2010
Location: Fremont, MI
Posts: 15
|
I’ve had a dry u-joint make the same noises before on my truck. I searched all over trying to find the noise, I kept checking the u-joints but couldn’t get any play out of them. I finally pulled the drive shaft and found that two caps had no grease in them, they were riding on dry needle bearings. That would be my guess if the noise is there when applying power from the engine.
|
09-19-2011, 08:20 PM | #14 |
|
does the car bog at all if you give it full throttle? could be fuel filter
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
NEW Pfadt Rear Tie Rods: $210 SHIPPED Trail Arms And Tie Rods: $395 SHIPPED at APEX!! | Apex Motorsports | Suspension / Chassis / Brakes | 32 | 11-16-2013 09:15 AM |
Rear end "popping" noise, need help and opinions | Fiftydriver | V8 and V6 Transmissions / Driveline (6L80 / 6L50 / TR6060 / AY6) | 35 | 09-19-2013 08:47 PM |
What do all the abbreviations mean? | CrzyGamr2 | 5th Gen Camaro SS LS LT General Discussions | 77 | 12-07-2012 04:34 AM |
Suspension Noise after lowering spring install | wwddnnone | Suspension / Brakes / Chassis | 5 | 07-10-2011 06:25 PM |
Setting up an IRS/Drivetrain for Drag Racing | Kyle2k | Suspension / Brakes / Chassis | 44 | 06-05-2010 09:17 PM |