Drastically lowering IAT.... - Page 13 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

mikepage0007 · 01-29-2011, 09:18 AM

man, i,m gonna go rent you a camaro soon, just so we can check this out..lol

mikepage0007 · 01-29-2011, 09:35 AM

video does look intersting, but as 1 person said, need to be at a track , with a couple runs of b4 temps and a couple runs with chiller, operating under full boost and wot temps..that would be the informative type video..running chiller on 70 degree day @ 70mph with chill factor of 50 degrees with wind , daily driving ..does not move me...not trying to bash or anything , just trying to give you unbiased perspective, from outside looking in....as i really don,t want meth and i,m sure others feel the same.....and sorry , i,m just not the guinea pig type...but def willing to pay for something that does what you claim it could do..looks very promising..good luck and keep up the hard work..track weather is coming . so i suggest you get it done b4 season kicks...like coming out with the new toy b4 xmas...sales up 1000% and can,t make fast enough..

SC2150 · 01-29-2011, 07:32 PM

Next Thurs eve the owner is going to the track & videoing it.

mikepage0007 · 01-29-2011, 09:50 PM

Quote:

Originally Posted by SC2150

Next Thurs eve the owner is going to the track & videoing it.

sounds great...also we are getting together for the pony wars up at sgmp in april...stangs and camaro,s...get it done b4 then , and pass the word along...can,t ask for a better way to cover both sides at 1 place..info posted in southeast location..bring it up there working and show it...i bet there will be at least couple dozen sc stangs and camaro,s

SC2150 · 01-30-2011, 10:18 AM

STS_CHILLER · 02-02-2011, 08:17 PM

Still need a Volunteer Camaro5 to do first install on. CNC parts are ready and 90% on the rest of kit. Come on February is short we would like ship first kits March!

We need some one to write a PID for HPT to log the ICWT and Ambient air sensors I made! Be glad to pay for this. That would allow us to log everything side by side.

GretchenGotGrowl · 02-03-2011, 07:58 AM

I got to see this set up on CoolHands' vette while I was there in January and it was awsome. These guys pay a lot of attention to detail and the whole setup looks real nice. They took some measurements on my Camaro, but they really need someone with a water-air cooled SC to do the rest of their development. PLEASE, someone step up and help them get this done.

FLUBYU · 02-03-2011, 06:00 PM

I know its not quite the same, but do you wanna test it on a G8?

SC2150 · 02-04-2011, 08:02 AM

Sure would. We need a G8 to develop the kit for it as well. Would need the car for at least 1-2 weeks.

Tempest2000 · 02-05-2011, 12:18 AM

Hurry up and be the test mule for a G8

I'd be interested as I'm going FI soon.

SC2150 · 02-07-2011, 06:46 PM

Still need a local top mount SC camaro to finish camaro 5 kit!!!!!

Nine Ball · 02-07-2011, 08:12 PM

I sent you a message about the C6 vette kit, never got a response back. Are these for sale yet?

SC2150 · 02-08-2011, 08:23 AM

Sorry. Not for sale yet, but close! I'll PM you w/dealer info when ready.

SC2150 · 02-16-2011, 07:55 AM

STILL NEED A DONER CAMARO!!!!!

01-29-2011, 09:18 AM	#169
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	man, i,m gonna go rent you a camaro soon, just so we can check this out..lol __________________

01-29-2011, 09:35 AM	#170
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	video does look intersting, but as 1 person said, need to be at a track , with a couple runs of b4 temps and a couple runs with chiller, operating under full boost and wot temps..that would be the informative type video..running chiller on 70 degree day @ 70mph with chill factor of 50 degrees with wind , daily driving ..does not move me...not trying to bash or anything , just trying to give you unbiased perspective, from outside looking in....as i really don,t want meth and i,m sure others feel the same.....and sorry , i,m just not the guinea pig type...but def willing to pay for something that does what you claim it could do..looks very promising..good luck and keep up the hard work..track weather is coming . so i suggest you get it done b4 season kicks...like coming out with the new toy b4 xmas...sales up 1000% and can,t make fast enough.. __________________

02-03-2011, 07:58 AM	#175
GretchenGotGrowl Drives: 11 F150 EB/13 Sonic RS/15 Z06 Join Date: Sep 2010 Location: Little Rock, AR Posts: 7,129 View My Garage	I got to see this set up on CoolHands' vette while I was there in January and it was awsome. These guys pay a lot of attention to detail and the whole setup looks real nice. They took some measurements on my Camaro, but they really need someone with a water-air cooled SC to do the rest of their development. PLEASE, someone step up and help them get this done. __________________ New Ride -- 2015 Z06 2LZ (stock) -- Journal Old Ride -- 2012 Camaro 2LT/RS (647 RWHP & 726 RWTQ) -- Build Thread

02-03-2011, 06:00 PM	#176
FLUBYU Drives: 2009 Pontiac G8 GT Join Date: Feb 2011 Location: Tampa Fl Posts: 4	I know its not quite the same, but do you wanna test it on a G8? __________________ 2009 G8 GT Liquid Red TVS 1900 3.2 pulley. 65lbs injectors Snow Water/Meth Injection Kit Kooks Long Tubes Kooks Catted X-Pipe Magnaflow Axle Backs Roto-Fab CAI Tuned By Precision Motorsports of Florida 481 HP/536 TQ

02-07-2011, 08:12 PM	#180
Nine Ball Drives: 1969 & 2016 Camaro SS Join Date: Oct 2008 Location: Houston, TX Posts: 3,849	I sent you a message about the C6 vette kit, never got a response back. Are these for sale yet? __________________ Fquick.com/NineBall

01-29-2011, 07:32 PM	#171
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Next Thurs eve the owner is going to the track & videoing it.

01-30-2011, 10:18 AM	#173
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063

02-02-2011, 08:17 PM	#174
STS_CHILLER Drives: Maggie 05 GTO/JETTA TDI Join Date: Oct 2010 Location: Bradenton FL Posts: 50	Still need a Volunteer Camaro5 to do first install on. CNC parts are ready and 90% on the rest of kit. Come on February is short we would like ship first kits March! We need some one to write a PID for HPT to log the ICWT and Ambient air sensors I made! Be glad to pay for this. That would allow us to log everything side by side.

02-04-2011, 08:02 AM	#177
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Sure would. We need a G8 to develop the kit for it as well. Would need the car for at least 1-2 weeks.

02-05-2011, 12:18 AM	#178
Tempest2000 Drives: 2008 G8 GT Join Date: May 2010 Location: Smyrna, TN Posts: 12	Hurry up and be the test mule for a G8 I'd be interested as I'm going FI soon.

02-07-2011, 06:46 PM	#179
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Still need a local top mount SC camaro to finish camaro 5 kit!!!!!

02-08-2011, 08:23 AM	#181
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	Sorry. Not for sale yet, but close! I'll PM you w/dealer info when ready.

02-16-2011, 07:55 AM	#182
SC2150 Account Suspended Drives: 2012 Camaro RS, RX supercharged Join Date: Dec 2009 Location: Bradenton, FL Posts: 6,063	STILL NEED A DONER CAMARO!!!!!

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY : Install Lowering Springs on 2010 Camaro	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	42	03-29-2017 01:31 PM
Pfadt Race Engineering Lowering Springs Improve Looks And Performance.	Apex Motorsports	Suspension / Chassis / Brakes	341	02-02-2014 11:52 AM
Special Pfadt lowering spring offer! Limited time SALE, Photos included!	IPS Brandon	Suspension / Chassis / Brakes	30	10-20-2010 10:24 AM
Eibach Lowering Springs & Sway Bars @ Phastek Performance	Jason@Phastek	Suspension / Chassis / Brakes	0	01-29-2010 03:56 PM