10-03-2023, 03:02 AM | #1 |
BOHIC
Drives: 2010 Camaro SS "Enola" Join Date: Jun 2014
Location: Winter Springs, FL
Posts: 562
|
Steering wheel horn button
Looking to install a push button on my aftermarket steering wheel for my horn. Anyone tapped into the existing wiring to do something like that? Would be nice to use the existing wiring and just install the switch. I’m thinking it’s just a straightforward install once the wiring is identified.
__________________
What else can I do to my Camaro?
|
10-03-2023, 04:11 AM | #2 |
BOHIC
Drives: 2010 Camaro SS "Enola" Join Date: Jun 2014
Location: Winter Springs, FL
Posts: 562
|
Looks like grn/wht pin 18 in the wiring diagram I found. Just gotta find what switch or horn to use. Yes I answered my own question
__________________
What else can I do to my Camaro?
|
10-03-2023, 12:08 PM | #3 |
Drives: 2011 SS-RS Join Date: May 2011
Location: FLORIDA
Posts: 11,765
|
That's a cool looking wheel!! Hope you get the horn deal figured out.
__________________
TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.
|
11-20-2023, 06:25 AM | #4 |
Drives: Camaro 2017 Join Date: Nov 2023
Location: USA
Posts: 1
|
I did a similar mod on my ride, and it's a game-changer! For the steering wheel horn button, tapping into existing wiring sounds like a solid plan. I went the straightforward route too, identified the wires, and bam—new button in place! Just a heads-up, be sure to check your local regulations to stay on the right side of the law.
As for your Camaro, if you're into DIY upgrades, ever thought about a drill horn? Adds a unique touch and definitely turns heads. Also, consider tweaking the lighting, swapping out decals, or exploring performance mods. Last edited by Alenbaarz; 11-27-2023 at 07:20 AM. |
|
|
|
|