Dueling Hash marks

bbrown450 · 02-11-2016, 07:16 PM

Had the Red hash's slapped on today and grabbed a couple quick shots. Had I paid attention I might have noticed there is a grey border that is on each, this could have been trimmed off, now I will figure out a way to mask it somehow. Mosaic Black is the color.

cwatson6 · 02-11-2016, 07:21 PM

It looks good

Openroad346 · 02-11-2016, 07:22 PM

I was just looking tonight get some black ones for my red car. Where did you get yours from?

Glen e · 02-11-2016, 07:24 PM

Nice barry, mine here from patrick tomorrow..

stratt · 02-11-2016, 07:37 PM

Quote:

Originally Posted by Openroad346

I was just looking tonight get some black ones for my red car. Where did you get yours from?

Check your PM

caverman · 02-11-2016, 08:54 PM

IMO it looks good the way it is with the gray border. I wouldn't touch it.

CamaroBody · 02-11-2016, 09:12 PM

now that's sexy

ScratchAce · 02-11-2016, 10:25 PM

Pretty damn cool!

KMPrenger · 02-12-2016, 09:18 AM

I personally like the outline myself. I say don't trim it.

Quote:

Originally Posted by Glen e

Nice barry, mine here from patrick tomorrow..

Did you get the Metallic Gray?

Glen e · 02-12-2016, 01:20 PM

black.. ...I don't like the embedded black mini-camaro logos after seeing them in person, so I'll pull these, and replace with separate hashes from Ridergraphix....I also want a gloss black to compliment the splitter. So knowing these are not staying, I trimmed the border before applying....but it does look better (to me) without the border - on my color. Trimming leaves a gap on hood, so I'm sure this will be a failed mod for many...again, not looking for opin, I know they won't stay on the car....

bbrown450 · 02-12-2016, 02:31 PM

Quote:

Originally Posted by nickgiacalone

Been thinking about having a set put on my car as well. Mosaic Black also, but I was thinking of going with cyber gray hash marks. What do ya'll think? bbrown450....did you install these yourself? How hard was it?

Nope I built it into the deal... Glen E did his and said it was cake, Know that there is a "Border" on these on mine it is "Grey"n not the end of the world but can be cut off...see Glen's in same post. They have really grown on me, never did a stripe or decal on any of my Vettes. I am going with. A black/ Red offsets , I think Grey would look good but you have to balance that look else where on your car ( wheels) IMO....don't be afraid to try ...you can always take it off

KMPrenger · 02-12-2016, 02:37 PM

Well guess I'm still looking for someone to get the metallic grey lol.

Rider Graphix Metallic Grey are going for $159 I think.....wow. I never dreamed they'd be more than what I can get the GM ones for.

I'd love to get them now, but wouldn't work on my blue currently...not until I get other grey metallic parts to tie it all together(assuming I go that route)

I'm thinking the grey hashes, metallic grey (high shine to brighten them up ) wheels, and a dovetail spoiler to match.

But really, I'm having a hard time making up my mind. I've got time to think.

Glen e · 02-12-2016, 02:44 PM

Quote:

Originally Posted by KMPrenger

Well guess I'm still looking for someone to get the metallic grey lol.

Rider Graphix Metallic Grey are going for $159 I think.....wow. I never dreamed they'd be more than what I can get the GM ones for.

I'd love to get them now, but wouldn't work on my blue currently...not until I get other grey metallic parts to tie it all together(assuming I go that route)

I'm thinking the grey hashes, metallic grey (high shine to brighten them up ) wheels, and a dovetail spoiler to match.

But really, I'm having a hard time making up my mind. I've got time to think.

I think that will be nice, as Barry was saying above, you have to pick out design elements that match all the way through the car which I know you're doing. Most people don't get that. I wouldn't worry about the ridergraphics price, to get the right look I don't care about the money… What you might want to do is have rider graphics or big worm send you samples… To get it right ....

KMPrenger · 02-12-2016, 03:52 PM

Quote:

Originally Posted by Glen e

I think that will be nice, as Barry was saying above, you have to pick out design elements that match all the way through the car which I know you're doing. Most people don't get that. I wouldn't worry about the ridergraphics price, to get the right look I don't care about the money… What you might want to do is have rider graphics or big worm send you samples… To get it right ....

I like that idea

02-11-2016, 07:16 PM	#1
bbrown450 Drives: 2016 Mosaic Black 2SS Join Date: Dec 2013 Location: Plant City Posts: 408	Dueling Hash marks Had the Red hash's slapped on today and grabbed a couple quick shots. Had I paid attention I might have noticed there is a grey border that is on each, this could have been trimmed off, now I will figure out a way to mask it somehow. Mosaic Black is the color. Attached Images

02-11-2016, 07:22 PM	#3
Openroad346 Drives: 2016 Camaro lt rs Join Date: Jan 2016 Location: Western NY Posts: 60	I was just looking tonight get some black ones for my red car. Where did you get yours from? __________________ 2016 LT/RS, Sunroof, A8, Bose, Hashmarks

02-11-2016, 07:24 PM	#4
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	Nice barry, mine here from patrick tomorrow.. __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant

02-11-2016, 08:54 PM	#6
caverman Drives: '69 SS Convertible Join Date: May 2009 Location: DFW, TX Posts: 7,111	IMO it looks good the way it is with the gray border. I wouldn't touch it. __________________ *-2010 Camaro* 2SS \| M6 \| VR w/White Stripes \| 1 3/4" KOOKS - 3" Magnaflow \| LPE 3.91 gears \| ADM tuned \| Halltech w/ADM Scoop \| Spohn/BMR Trailing Arm/Toe Rod \| BC Coilovers\| Pedders FE4 ZL1 swaybars \| Cradle/Diff/Radius Rod bushings \| VMax TB \| Morimoto Projectors \| MGW shifter \| Red Calipers Build Journal

02-11-2016, 10:25 PM	#8
ScratchAce Drives: 2SS - Hyper Blue/Ceramic White Join Date: Dec 2015 Location: Littleton, CO Posts: 262	Pretty damn cool! __________________ 2SS - Hyper Blue/Ceramic White, A8, MRC, Npp, Sunroof, Low-Gloss Black Wheels, White Rally Stripes.

02-11-2016, 07:21 PM	#2
cwatson6 Drives: 2016 Camaro SS - Red Hot Join Date: Mar 2010 Location: Greensboro, NC Posts: 343	It looks good

02-11-2016, 09:12 PM	#7
CamaroBody Drives: Hyper Blue 2SS Join Date: Jun 2013 Location: CA Posts: 1,160	now that's sexy

02-12-2016, 01:20 PM	#10
Glen e Retired from Car mfrs.... Drives: 2LT RS/HR-V Join Date: May 2013 Location: /Fort Lauderdale Posts: 10,048	black.. ...I don't like the embedded black mini-camaro logos after seeing them in person, so I'll pull these, and replace with separate hashes from Ridergraphix....I also want a gloss black to compliment the splitter. So knowing these are not staying, I trimmed the border before applying....but it does look better (to me) without the border - on my color. Trimming leaves a gap on hood, so I'm sure this will be a failed mod for many...again, not looking for opin, I know they won't stay on the car.... __________________ Glen CLICK HERE for detailing a new car: detailing for non detailers CLICK HERE for how to rinseless CLICK HERE for EASY wheel sealant Last edited by Glen e; 02-12-2016 at 06:18 PM.

02-12-2016, 02:37 PM	#12
KMPrenger Drives: 16 Camaro SS, 15 Colorado Join Date: May 2009 Location: Jefferson City, Missouri Posts: 13,943	Well guess I'm still looking for someone to get the metallic grey lol. Rider Graphix Metallic Grey are going for $159 I think.....wow. I never dreamed they'd be more than what I can get the GM ones for. I'd love to get them now, but wouldn't work on my blue currently...not until I get other grey metallic parts to tie it all together(assuming I go that route) I'm thinking the grey hashes, metallic grey (high shine to brighten them up ) wheels, and a dovetail spoiler to match. But really, I'm having a hard time making up my mind. I've got time to think. __________________ 2016 Camaro 1SS - 8-speed - NPP - Black bowties 2010 Camaro 1LT V6 (Sold. I will miss her!)

User Name		Remember Me?
Password