03-04-2021, 06:42 PM | #1 |
Drives: '15 Silverado LTZ & '13 ZL1 ragtop Join Date: Nov 2016
Location: Edmond, Oklahoma
Posts: 313
|
Which hole?
Made some adjustments to the rear shocks today. C5/R6 works great to smooth out the ride. Quick question on the sway bar attachments. Which hole is best? Application is the 2013 ZL1 Convertible A6 750ish rwhp. Launch weight will be about 5000#, currently running the 18" MT ET Streets but I have 17" Hoosiers mounted and ready if I need more sidewall. My question is which sway bar mounting holes will be best for this setup?
__________________
HP tune, Kooks 1 7/8" LT w/ cat deletes, FIC 1300 inj, E85, GPI SS3 blower cam, Fore Innovations Gen 5 dual pump module with twin TI Automotive 430 lph E85 compatible pumps, Lingenfelter 10 bolt 2.55" upper/9.17" lower pulleys, AFCO triple pass intercooler with dual fans, Killer Chiller interchiller, B3R insulated expansion tank, full BMR rear drag cradle and suspension, DSS one piece driveshaft and Stage 5 billet axle shafts, Rotofab CAI, reinforced brick, Devil's Own progressive methanol injection, FTI 9.5" billet lock up Street Racer torque converter, 3200 rpm stall, triple clutch.
|
03-04-2021, 08:03 PM | #2 |
Account Suspended
Drives: 2013 Sparkly Red One Join Date: Dec 2018
Location: Hospitality State
Posts: 2,558
|
I use the inner hole, full race mode.
|
03-05-2021, 01:30 AM | #3 |
Drives: 2010 2SS/RS Join Date: Dec 2009
Location: Clarksville Tennesse.
Posts: 6,064
|
5000 lbs!?!? The vert is that heavy???
__________________
Orange Krush II
1LE Front sway bar, Splitter, shocks and struts, Z28 dual mode mufflers, Intake, UCA Bushings, and Toresen 3.91 Diff. 1 piece DSS Drive Shaft, ZL1/C7 Calipers, and 32mm JPSS Rear Bar. ASC race spec splitter and wicker. 6th Gen M017 Wheels. Stainless Works 1 7/8 LTs. DSE and PAFDT Suspension components. |
03-05-2021, 05:00 AM | #4 |
Drives: '15 Silverado LTZ & '13 ZL1 ragtop Join Date: Nov 2016
Location: Edmond, Oklahoma
Posts: 313
|
__________________
HP tune, Kooks 1 7/8" LT w/ cat deletes, FIC 1300 inj, E85, GPI SS3 blower cam, Fore Innovations Gen 5 dual pump module with twin TI Automotive 430 lph E85 compatible pumps, Lingenfelter 10 bolt 2.55" upper/9.17" lower pulleys, AFCO triple pass intercooler with dual fans, Killer Chiller interchiller, B3R insulated expansion tank, full BMR rear drag cradle and suspension, DSS one piece driveshaft and Stage 5 billet axle shafts, Rotofab CAI, reinforced brick, Devil's Own progressive methanol injection, FTI 9.5" billet lock up Street Racer torque converter, 3200 rpm stall, triple clutch.
|
|
|
|
|