What did you do to your 6th Gen Camaro today?! - Page 563

VJChevelle67 · 02-09-2020, 12:19 PM

Quote:

Originally Posted by Hotscape1996

Installed my new headlights 🔥

Nice looking mean ass look how well do that light up the road and ditch

TenSeven · 02-10-2020, 06:41 PM

After having them sitting on my workbench for the past month, I finally applied the GM LT1 emblems on the hood:

STYLO LT1 · 02-10-2020, 10:03 PM

Quote:

Originally Posted by TenSeven

After having them sitting on my workbench for the past month, I finally applied the GM LT1 emblems on the hood:

Justcruising · 02-11-2020, 12:31 AM

Deleted sound tube and added ZL1 color matched spoiler

CHV2SS · 02-11-2020, 02:05 AM

Quote:

Originally Posted by VJChevelle67

Well it’s winter here she is only summer driven but I did turn the charger on her to keep the battery up to full charge. By the way does anyone know of a cold storage charger that one can leave on all winter . The one I thought would work is not for old weather. So I use my big charger I would like one that is automatic plug and leave for cold weather

summer or winter not problem it dont snow where i live. i rarely use it i baby the car. its just that im far away from home.

orange blaze · 02-11-2020, 10:25 AM

In all the years i have had cars i parked for winter i did the trickle charge before i put it away and then left it all winter. Never had an issue with it. This is the advice i got from a place that sells only batteries so they know their stuff.

NEGXXIS · 02-18-2020, 11:08 AM

I wrapped the 2020 front bumper insert in gloss black 3M 2080 vinyl and installed this weekend onto my 2019 (no after install pics yet)

I also removed the lighted inserts from my door panels and wrapped them to match the outside of the car (Matte Magnetic Black) and seriously thinking about wrapping the inside door handles also.

2SS Capt · 02-18-2020, 11:15 AM

Quote:

Originally Posted by NEGXXIS

I wrapped the 2020 front bumper insert in gloss black 3M 2080 vinyl and installed this weekend onto my 2019 (no after install pics yet)

I also removed the lighted inserts from my door panels and wrapped them to match the outside of the car (Matte Magnetic Black) and seriously thinking about wrapping the inside door handles also.

That looks awesome!

Camaro_QC · 02-18-2020, 11:53 AM

Nice job it looks really clean. I am tempted to do the same on my car!

NEGXXIS · 02-18-2020, 12:20 PM

Quote:

Originally Posted by 2SS Capt

That looks awesome!

Thanks !!

Quote:

Originally Posted by Camaro_QC

Nice job it looks really clean. I am tempted to do the same on my car!

Thanks!! It wasnt hard to do at all.

Ron2ss · 02-18-2020, 12:56 PM

Quote:

Originally Posted by VJChevelle67

Well it’s winter here she is only summer driven but I did turn the charger on her to keep the battery up to full charge. By the way does anyone know of a cold storage charger that one can leave on all winter . The one I thought would work is not for old weather. So I use my big charger I would like one that is automatic plug and leave for cold weather

CTEK MXS 5.0
SMARTERCHARGER.COM

Booher · 02-18-2020, 03:53 PM

I've been wanting to wrap my doors the same way as well. How hard was it? Any write ups or tips to help with removing it or installing the vinyl?

DC5 · 02-18-2020, 06:30 PM

Quote:

Originally Posted by 2SS Capt

That looks awesome!

I agree---excellent work, NEGXXIS!

NEGXXIS · 02-19-2020, 08:04 AM

Quote:

Originally Posted by Booher

I've been wanting to wrap my doors the same way as well. How hard was it? Any write ups or tips to help with removing it or installing the vinyl?

It wasnt hard at all.
There are like 8 small phillips head screws on the back of the door panel that hold it on and 2 places (on on each end of the light) that you unclip the wiring. Then there is I think 2-3 places that have plastic clips that pop out very easily. After all that is undone, flip the door panel back over to the front side and remove the bottom part first and tilt it towards you a little so the top connector slides out without catching on the door panel.
vinyl wrapping was pretty easy. I just laid the part onto a sheet of vinyl and cut a little larger than the part. like this pic. After you get the whole thing wrapped...trimming the vinyl with a very sharp blade around the light is the hardest part, just be slow and precise with the cut and it will look great.

Quote:

Originally Posted by DC5

I agree---excellent work, NEGXXIS!

Thanks !!

02-11-2020, 12:31 AM	#7872
Justcruising Drives: 2019 Chevrolet Camaro 2SS Join Date: Jul 2019 Location: Florida Posts: 269	Deleted sound tube and added ZL1 color matched spoiler Last edited by Justcruising; 09-26-2020 at 02:04 AM.

02-18-2020, 11:08 AM	#7875
NEGXXIS Drives: 2019 Camaro SS A10 Join Date: May 2009 Location: Tempe, Arizona Posts: 1,062 View My Garage	I wrapped the 2020 front bumper insert in gloss black 3M 2080 vinyl and installed this weekend onto my 2019 (no after install pics yet) I also removed the lighted inserts from my door panels and wrapped them to match the outside of the car (Matte Magnetic Black) and seriously thinking about wrapping the inside door handles also. __________________ 2020 Range Rover Sport HSE P525 Supercharged 5.0 - Firenze Red - 9012 wheels SOLD 2019 Camaro SS -Wrapped in Matte Magnectic Black - Anderson Carbon Hood and Rear Spoiler – Ikon front spoiler – OEM ZL1 Side Rockers - ZL1 Addons Diffuser - BMR 1.0” Lowering Springs - MRR 228 Wheels 20x10 and 20x11 RIP 2016 Camaro SS https://www.camaro6.com/forums/showthread.php?t=565453 SOLD 2010 Camaro SS Featured in GM High Tech Performance and Camaro Now Magazines - http://www.superchevy.com/features/g...of-perfection/

02-18-2020, 11:53 AM	#7877
Camaro_QC Drives: 08 Tiburon GS, 2018 Camaro 2.0T Join Date: Sep 2017 Location: Québec Posts: 1,657	Nice job it looks really clean. I am tempted to do the same on my car! __________________ 2018 Camaro LS \| 6 spd \| 2.0L turbo \| Nightfall Grey \| RS package \| Technology Package. --------------------- Order WDGHKX 1100 - 5/08/2018 \| 3800 - 6/18/2018 2000 - 5/09/2018 \| 4200 - 6/21/2018 3000 - 5/28/2018 \| 5000 - 6/27/2018 6000 - 6/29/2018

02-10-2020, 06:41 PM	#7870
TenSeven Drives: 2016 Camaro SS Join Date: Apr 2016 Location: Huntington Beach, CA Posts: 299 View My Garage	After having them sitting on my workbench for the past month, I finally applied the GM LT1 emblems on the hood:

02-11-2020, 10:25 AM	#7874
orange blaze Red Hot SS Drives: 2017 Camaro 2SS Join Date: Nov 2013 Location: Winnipeg, Manitoba, Canada Posts: 150	In all the years i have had cars i parked for winter i did the trickle charge before i put it away and then left it all winter. Never had an issue with it. This is the advice i got from a place that sells only batteries so they know their stuff.

02-18-2020, 03:53 PM	#7880
Booher Drives: 2019 zl1 6 speed Join Date: Jul 2017 Location: Lake Havasu Arizona Posts: 977	I've been wanting to wrap my doors the same way as well. How hard was it? Any write ups or tips to help with removing it or installing the vinyl?

User Name		Remember Me?
Password