camshaft for v6 camaro

[MichaelH]

I'm def going to wait for a big package on the cams and everything so I can get it all at once

[GoPaul]

can you PM price and financing details too please.

[mhog]

Originally Posted by esponda

I would be curious to see that document. My regular shop contacted me back and refused to do the work :(
Apparently they won't do modifications that violate emissions. So if anyone knows a good shop in the maryland area that would be helpful

Does this violate emmissions?

[MACE_ENG]

Ok before plowing through everyones PM requests, to give people an idea on cam installation, with the right tools the job will realistically take around 4-5 hours, though more if you really take things slow (understandably) as the main front cover won't need to come off

The reason I say this is the GM tool in the link below (EN-48313) is used to support the chain tensions, preventing the cam chain timing from being screwed up

http://www.ebay.com/itm/NEW-GENUINE-...11%26rk%3D1%26

For more info about the process check out the links below

Alloytec (LY7) cam swap instructions
http://www.mediafire.com/?6n1t9loadmp5hlc

LLT Cam swap instructions
http://www.mediafire.com/?auvr9v57cmcn207

Note I've also included the LY7 instructions as explains better the use of the tool as I've described, which if very likely applicable in the LLT's case as the chain and tensioner arrangements are identical

Long story short the job is smaller then people probably think, with the right tools

Hope this helps

Kindest Regards,
Steve

[MACE_ENG]

Originally Posted by KMPrenger

Wow...lots of interest and PMs for pricing. Thats good!

I just hope all you guys realize this is not really a DIY project. At least it is not something I'd want to tackle and I'm the type that likes to do all of my own mods. But if you have the knowledge to do it, and want to tackle it on your own....more power to ya!

Really looking forward to seeing it get done.

It's not as difficult as people have assumed (myself included) with the right tools. Please refer to my previous post
http://www.camaro5.com/forums/showpo...&postcount=708

Originally Posted by GretchenGotGrowl

If I remember right there are some special tools required.

Correct EN-48313

Originally Posted by gahammerle

One more excuse to DIY - you get to expand your tool collection!

Projects that require me to buy a new tool always get moved up the list.

DIY certainly adds to the modding element for sure. Which is why we try an empower modders/owners to do the if they can

Originally Posted by BaylorCamaro

Yeah, it's called a mechanic.

Or this LOL

Originally Posted by LIM3

Can you pm the special tools needed to make it easier. Just to get an idea

Refer to this post
http://www.camaro5.com/forums/showpo...&postcount=708

Originally Posted by esponda

PM pricing and whatever support mods I should get please

In order to get it to run properly a tune is really needed to suit, which Vince can help with. Ideally you would have wanted to have upgraded intake and exhaust systems first before considering this mod

Originally Posted by Yellow_Glide

Lol, hope you have plenty of sets in the warehouse!!

We don't :(

Originally Posted by Amarr014

do we have a dyno of what the cams are doing for the llt? did i miss it?

The gains on a dyno dynamics dyno have been around 45rwhp

Originally Posted by LIM3

Is there a package deal coming in the future ?
Plenum space. Insulator , ported IM , cam etc ...

Originally Posted by MichaelH

I'm def going to wait for a big package on the cams and everything so I can get it all at once

We can always do a package deal for people if it would help them

Originally Posted by mhog

Does this violate emmissions?

I'm not sure which mod does, unless it's been certified? This mod hasn't been certified to comply with emissions standards

[MACE_ENG]

Will send PM's to people about pricing shortly

[mydreamcar]

just order my set

[Yellow_Glide]

Congrats my dream car, loos like we will be the first in our neighborhoods to have a cammd v6.

[mydreamcar]

thanks yellow glide, yeah pretty happy cant wait to get these in and see what it feels like

[Yellow_Glide]

What do you have for mods so far? Doing before and after runs?

[Grimlock]

Originally Posted by esponda

I would be curious to see that document. My regular shop contacted me back and refused to do the work :(
Apparently they won't do modifications that violate emissions. So if anyone knows a good shop in the maryland area that would be helpful

Come Monday, I'm going to call Maryland Performance, T and T and Tony's Corvettes and hope I have some luck with any of those guys.

[kuzman89]

Top work Mace!!! WANT!

[SC2150]

We are doing the installs here in FL if anyone needs....anxious to see how far we can push NA and the cams are key. We also can do the ported heads at the same time and upgraded timing cahin set.

[SC2150]

We are doing the installs here in FL if anyone needs....anxious to see how far we can push NA and the cams are key. We also can do the ported heads at the same time and upgraded timing cahin set.