07-13-2009, 12:11 PM | #1 |
Drives: 2013 Camaro ZL1 Join Date: Apr 2009
Location: El Paso, Tx
Posts: 688
|
My engine shaking a little at idle.
I was wondering if anyone has felt this, this is my first ever GM car and I ask because, my 07 GT was very smooth back when it was stock you could barely tell it was on at idle.
__________________
Devliered July 20, 2012
|
07-13-2009, 12:12 PM | #2 |
Okie doke
|
Mine does it as well .. idles around 500rpms and has a bit of a shake. It is normal ..
Crowley
__________________
|
07-13-2009, 12:27 PM | #3 |
Drives: 2013 Camaro ZL1 Join Date: Apr 2009
Location: El Paso, Tx
Posts: 688
|
Oh thats good to know thanks, also since you have a twin of my car thers another thing I've been forgetting to ask, you know how the mirrors change to a greenish color at night?? Do all 3 mirrors do it?? cuase my passenger side mirror is not doing it. Just the center and driver's side.
__________________
Devliered July 20, 2012
|
07-13-2009, 12:33 PM | #4 | |
Okie doke
|
Quote:
Crowley
__________________
|
|
07-13-2009, 12:34 PM | #5 |
Okie doke
|
Here you go .. check out this thread ..
http://www.camaro5.com/forums/showth...ghlight=mirror Crowley
__________________
|
07-13-2009, 12:34 PM | #6 |
Camaro SL,UTs
Drives: 2010 Camaro SS/RS #16429 Join Date: Sep 2006
Location: South Jordan, UT
Posts: 7,358
|
Shake is normal. You're at idle sitting on top of 426hp!!! Shake is good!!!!
__________________
|
07-13-2009, 12:36 PM | #7 |
Just Lovin' My Camaro!
Drives: CGM 2LT/RS/AUTO Join Date: Apr 2009
Location: san antonio, tx
Posts: 1,325
|
I don't think that right sideview mirror changes, but I could be wrong. I don't see why GM would make em like that, I think the passenger side view should be auto-dimming as well, it's not like it for the passenger convinience it's made for the driver.
__________________
CGM( GRAY 2 tone interior ) 2LT/RS/AUTO
NJHKKM $29,965.00 1EH37 1100 03/28/2009 AFF, B34, DCP, FE9, GBV, LLT, MX0, SGC, UQA, WRS, 2LT 50 YEARS FROM NOW, DON'T YOU WANNA BE ABLE TO LOOK BACK AND SAY YOU HAD THE GUTS TO GET INTO THE CAR!?!? ORDER STATUS : 6000 as of 08.18.2009. VIN# 33,985!!! His name is 'GOLIATH'!!! GOT MY CAR!!!! AND I LOVE IT!!!! |
07-13-2009, 12:44 PM | #8 | |
Drives: 2013 Camaro ZL1 Join Date: Apr 2009
Location: El Paso, Tx
Posts: 688
|
Quote:
LOL I guess your right, I just wanted to make sure I didnt have a defective engine, Iw ould hate to take my baby to the dealer for god knows how long to get warranty repairs done to it.
__________________
Devliered July 20, 2012
|
|
12-15-2022, 01:11 AM | #9 |
Drives: 2011 Chevy Camaro 2SS A/T Join Date: Feb 2020
Location: Swiss, Geneva
Posts: 71
|
It looks like to me that shaking at idle is not entirely correct. I have checked 2 cars with L99 engine from a rent-a-car and they doesn't have any shakings, that could be felt on the seats (that I have for a 2 years of ownership).
When I had 3.6 LFX, I also had shaking at idle, with random jerks without any ECM error or check engine light. I replaced the whole set of chains and the shaking went away. Now I have a similar situation on my L99. The shaking intensifies if I agressively drive and then stop at a traffic light. I changed motor mounts but no result. Also checked with smoke generator for the air leakage and found nothing. In our local GM service they checked an oil pressure on the VVT and found great results (currenly use 5w40, 108K mileage). Check engine light is not comes on, however, error P0011-00 constantly sits in the ignition system chapter in the ECM. Also in 8 cases of 10 I have "Service Stabilitrak" message that comes on during cranking then dissapear. To eliminate it I crank starter slightly longer that usual. As I know, P0011-00 is related to the VVT sprocket and / or timing chain and / or camshaft position. Do you have any thoughts on this? |
12-15-2022, 07:06 AM | #10 |
Drives: 2010 SS 2SS M6 Join Date: Aug 2016
Location: Smithsburg, Md.
Posts: 2,445
|
Holy thread resurrection...
__________________
2010 SS 2SS M6 - Tune by RDP dynoSteve!(Woot) - Daily Driver - 150K! - All work by me...
|
12-15-2022, 01:17 PM | #11 |
|
Correct. Drivers and rear are the only dimming mirrors. The passenger does not.
__________________
|
12-15-2022, 09:37 PM | #12 |
Drives: 15 Camaro 2SS M6 Join Date: Jan 2020
Location: BC
Posts: 732
|
|
12-16-2022, 08:25 PM | #13 | |
Drives: Never just fly under the radar Join Date: Jul 2015
Location: Kansas
Posts: 1,531
|
Mine shakes for some reason to
Sorry wish I had your answer but couldn't resist
__________________
1-8-4-3-6-5-7-2
Old Skool |
|
12-21-2022, 10:33 AM | #14 |
Drives: 2010 SS L99 Join Date: Sep 2018
Location: Missouri
Posts: 1,634
|
This is what solid motor mounts are for. No, not poly, solid
__________________
Previous PB:11.079 @ 122.99mph.. New setup time: TBD
The 11.079 pass: https://youtu.be/pz27Zq54t_E Build thread - www.camaro5.com/forums/showthread.php?t=555371 |
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
V6 engine idle | showcamaro | Camaro V6 LLT Engine, Exhaust, and Bolt-Ons | 9 | 06-17-2009 04:03 PM |
LS9 SC old news. Here comes the LSX. 850HP, 840 lb-ft of Torgue | 13F20 | 5th Gen Camaro SS LS LT General Discussions | 15 | 09-22-2008 04:35 PM |
Camaro ls3 news...true or false? | Dark Knight | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 74 | 06-05-2008 05:29 PM |
GM moves closer to HCCI engine production | Scotsman | Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons | 16 | 05-16-2008 06:16 PM |
Axial Vector Engine | Mr. Wyndham | General Automotive + Other Cars Discussion | 6 | 06-20-2007 04:00 PM |