10-16-2022, 03:41 PM | #1 |
Drives: 2015 camaro 2ss, 87 monte ss Join Date: Jun 2016
Location: Houston
Posts: 242
|
Chevy Racing Hydraulic Roller vs Johnson slow leakdown lifter
Again, opinions on those who have used them.
This is one area I don't want to cheap out on. I have heard some say they are very happy with the Chevy Racing but others swear by the Johnsons because they are supposedly quieter...... opinions please. Really the Chevy racing are almost 500 bucks so the extra 250 doesn't bother me but wanted to get some opinions. Very interested in noise level if any of you have input on that. I am going to be running a very mild vvt cam that doesn't even technically require the GM Racing lifters but I might as well at least go that route over the factory ls3 lifters. Thanks |
10-16-2022, 05:36 PM | #2 |
Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020
Location: Austin, TX
Posts: 2,109
|
I just got my new engine running and have the gm racing lifters. One thing that I noticed right off the bat is that their pretty noisy. But I honestly don't know how quiet that could be with a SS3 vvt cam. I also had them in my previous build too, and they still look good after a while. My son has them in his ls1 with a small cam and they seem to be a fair amount quieter. I guess I trust them not to fail and that's all that really matters.
__________________
DSS FX Forged Pistons, Eagle ESP L19 Forged Rods, ARP Head and Main Studs, TSP PRC 260 CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Performance Racing Lifters, CHE Trunnions , Molly Pushrods, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP 1 7/8" Longtubes with 3" TSP Exhaust, ZL1 Fuel Pump, Mishimoto Radiator, Mishimoto Oil Cooler, Tru Cool 40k Tranny Cooler, 3600 Circle D Converter, Fluid Dynamics Balancer
Build Thread https://www.camaro5.com/forums/showthread.php?t=609817 |
10-18-2022, 11:41 AM | #3 |
Drives: 6th Gen NicKey Camaro & others. Join Date: Nov 2015
Location: Loves Park, Illinois
Posts: 492
|
The GM CTSV designed racing lifters have been flawless to this point but for the difference we now use Johnson's for our builds and they are more quiet.
|
10-26-2022, 09:27 PM | #4 |
Drives: Chevrolet Camaro SS Join Date: May 2022
Location: West Michigan
Posts: 10
|
I beat the tar out of my Johnson 2116 lifters for the last 12k miles.
|
10-27-2022, 09:52 AM | #5 |
Drives: 2010 SS L99 Join Date: Sep 2018
Location: Missouri
Posts: 1,634
|
Have had the GM racing lifters for 4 years. 7600rpm for 3 years, 7800rpm for this year, no issues. I can't hear them, but I run open headers so its never been an issue anyway
__________________
Previous PB:11.079 @ 122.99mph.. New setup time: TBD
The 11.079 pass: https://youtu.be/pz27Zq54t_E Build thread - www.camaro5.com/forums/showthread.php?t=555371 |
10-27-2022, 07:32 PM | #6 |
|
GM/Caddy racing lifters here for just over a year and a half. They are working well and not noisy to me, but my exhaust is pretty loud.
__________________
2014 Camaro SS L99, Ashen Grey w/Black Leather - Build thread - http://www.camaro5.com/forums/showthread.php?t=491561
Mods - GPI 416 w/Custom Grind Cam, Ported Heads & Tuned by Ben, Holley Dominator ECU, Mag Heartbeat, ZL1 Fuel Pump & DSX Aux Pump, NW 103 TB, FIC 1650's, Alky Meth, Circle D 3600 Triple Disc, Kooks Headers, Viking Coil Overs & all the BMR Goodies in the rear, Zl1 3.23 Diff, DSS Axles, Gulfcoast Driveshaft, Hendrix Offset Diff Bushings, AFE Solid Subframe Bushings, 875HP/843TQ 5FDP |
11-04-2022, 05:04 PM | #7 |
Drives: 2015 camaro 2ss, 87 monte ss Join Date: Jun 2016
Location: Houston
Posts: 242
|
Went with Cadillac lifters
|
11-04-2022, 07:46 PM | #8 |
Drives: 2012 Chevrolet Camaro l99 Join Date: Aug 2020
Location: Austin, TX
Posts: 2,109
|
Like I said mine are noisy but they "get the job done"
__________________
DSS FX Forged Pistons, Eagle ESP L19 Forged Rods, ARP Head and Main Studs, TSP PRC 260 CNC Ported Heads milled .030, Cometic .040 Head Gaskets, GPI SS3 VVT Camshaft, GM Performance Racing Lifters, CHE Trunnions , Molly Pushrods, Melling 10355HV Oil Pump, Cold Air Inductions CAI, Fast LSXR Intake Manifold, Nick Williams 103 TB, TSP 1 7/8" Longtubes with 3" TSP Exhaust, ZL1 Fuel Pump, Mishimoto Radiator, Mishimoto Oil Cooler, Tru Cool 40k Tranny Cooler, 3600 Circle D Converter, Fluid Dynamics Balancer
Build Thread https://www.camaro5.com/forums/showthread.php?t=609817 |
|
|
|
|