Hendrix Off-Set Bushings - Differential Removal

[dma05]

I installed the Hendrix Off-Set bushings on my differential at the time of some suspension upgrades. When installing the differential back in the car with the new bushings, IT WAS NOT EASY! I had my buddy literally stand and dance on top of the rear cradle while I ease up the differential why a jack to get it to go in.


My question is, has anyone had any issues uninstalling it from the rear cradle after the Hendrix bushings? I'm looking to upgrade the differential gears and add a TruTrac.



I'm just hoping it's not as hard to get it out as it was to get it in.



thanks!

[demonspeed]

Gonna be tough, but you can do it - put your back into it.

I’ve also wondered how difficult it will be as well. Maybe just lower the cradle and put a block of wood above the pumpkin and jack the cradle back up while also supporting the diff from the bottom.

Could also shoot a lot of spray in the bushings and get a big pry bar.

[dma05]

Originally Posted by demonspeed

Gonna be tough, but you can do it - put your back into it.

I’ve also wondered how difficult it will be as well. Maybe just lower the cradle and put a block of wood above the pumpkin and jack the cradle back up while also supporting the diff from the bottom.

Could also shoot a lot of spray in the bushings and get a big pry bar.

Not a bad idea!