10-13-2019, 08:45 PM | #1 |
Drives: 2013 LS3 Camaro Join Date: Jul 2017
Location: Augusta, GA
Posts: 94
|
Fuel Pump
I'm going to upgrade to a drop-in Deatschwerks fuel pump for my new setup. Is it possible to swap the pump out of the sending unit or should I just get a whole new sending unit + pump? I ask this because I see they sell them separately and of course its cheaper to buy just the pump.
|
10-14-2019, 12:37 AM | #2 |
Drives: 2011 Camaro SS Join Date: Jul 2017
Location: Wichita,KS
Posts: 603
|
Is that pump still available? It was discontinued for fitment issues.
__________________
2011 Camaro 2SS, 6.0 iron block forged bottom end, Dart heads, BTR intake, Huron twin turbo kit, Summit stage 3 twin turbo cam, Circle D stage 4 6L90, 3800 FTI converter. BMR suspension, Viking coil overs, Fore triple pump fuel system.
|
10-14-2019, 04:13 PM | #3 |
Drives: 2010 Turbo LS3 Join Date: Dec 2009
Location: Palm Bay, FL
Posts: 2,736
|
I did not find it difficult to disassemble the fuel bucket. The sending units are a bit fragile so be careful.
__________________
2010 SS - On3 kit with downpipe cutout, CTR 78/80, CompCam 239/251 620/632 122+4, E85, Z28 suspension and ZL1 diff with Outlaw axles. Gen6 ZL1/1LE brakes.
2011 Vert - 416/w 230/236 .612/.602 115lsa, 1LE suspension w/32mm rear bar. Z28 diff. ZL1 brakes. |
10-20-2019, 09:24 AM | #4 |
Drives: 2013 LS3 Camaro Join Date: Jul 2017
Location: Augusta, GA
Posts: 94
|
Yeah many vendors still sell it
|
|
|
Tags |
fuel pump |
|
|