2014 HUD retrofit into 2010-2013 - Page 5 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

GearHeadPeter · 09-05-2014, 07:17 PM

Quote:

Originally Posted by hammdo

Found one shipped for $437 new.

I'm wondering also what else we need to do if we already have HUD?

-Don

Take out old HUD, put in new HUD. Of course the entire dash and center console has to come out. It's Plug and Play.

hammdo · 09-05-2014, 08:35 PM

Thanks!

I think I'll time that with the MyLink upgrade so I can do that all @ once.

Appreciate the assist!

-Don

KaBoom1701 · 09-05-2014, 09:29 PM

I'm sure the color HUD runs on a higher fuse s well....

Vjc834 · 09-09-2014, 07:17 PM

I thought I read somewhere that the 2014 HUD showed G forces and some other stuff that isn't on the 2013s.

GearHeadPeter · 09-09-2014, 07:58 PM

Quote:

Originally Posted by Vjc834

I thought I read somewhere that the 2014 HUD showed G forces and some other stuff that isn't on the 2013s.

That is true.

VeeGeeTea · 10-21-2014, 02:05 PM

Quote:

Originally Posted by zl1bro

How difficult to install?

You'll have to remove the whole dash, including the radio, gauges, and steering wheel.

This is where your Tetris skills comes to play.

jgray1978 · 11-12-2014, 09:00 PM

So...Has anyone determined if the 2014 HUD is FULLY functional in the 2012s including the G force reading?

OVERPAR73 · 11-13-2014, 11:38 AM

Any new info on this while I have my radio and center vent out? I have a 2013 and would like to swap it out for the colored HUD. I haven't seen any news from Ofer except it's on his site now for I think about $550 or so.

2SSRS@Gen5diy · 11-13-2014, 12:05 PM

It works on my 2010, tested on the car 2 days ago and it all works.

benji276289 · 11-13-2014, 12:58 PM

Quote:

Originally Posted by 2SSRS@Gen5diy

It works on my 2010, tested on the car 2 days ago and it all works.

Can you be more specific? Do you also have the 2014 DIC?

2SSRS@Gen5diy · 11-15-2014, 08:45 AM

Quote:

Originally Posted by benji276289

Can you be more specific? Do you also have the 2014 DIC?

I did not install the HUD in my dash only put it on the floor with some one looking as i drove it, i did look to see it was on before driving, The DIC is still working on, there is some thing in the 2010-11 that is not the same as newer year cars.

OVERPAR73 · 11-20-2014, 09:02 AM

Any news on this HUD Ofer? Need a project to do over the holidays, just not sure about tearing the whole dash apart!

Spartan01 · 11-20-2014, 09:22 AM

I looked into this project for my 2010 SS,
I was quoted $800-950 for the install.
This was from 2 separate and highly rated install shops in my area...
Just wanted to put a ballpark figure out there for people wanting to get this mod.

Now for someone like Ofer, who has done this many times before, it would probably be a lot less.

09-05-2014, 09:29 PM	#59
KaBoom1701 KaBoom1701 Drives: 13' ZL1 Red M6 Join Date: Dec 2012 Location: I.E. SoCal (Yucaipa) Posts: 8,630	I'm sure the color HUD runs on a higher fuse s well.... __________________ Mods: Roto-Fab Intake, WW Res. kit & Big Gulp Air Scoop, Elite Catch Can, ATI Super Damper & 18% OD Pulley, LF Idler pulley bracket, Metco CC breather, ID850 Injectors, Stainless Power Headers w/ ceramic coating, TR71X Spark Plugs, JMS Fuel Pump Booster, Bo White TB, Tuned by Ted @ Jannetty Racing, Ron Davis HX, D3 Reservoir, Pfadt 1" Springs, Moreno Camber Plates, ZL1 Addons Splitter guard washers, Tow Hook kit & rock guards, Hurst Shifter Billet Plus 6 Speed Short Shifter, ZL1 DRL lighting harness, ZL1 Recaro Seats.

11-12-2014, 09:00 PM	#63
jgray1978 Drives: '12 2SS/RS 45th vert, '14 2SS/RS Join Date: Nov 2013 Location: Claremore, Oklahoma Posts: 840 View My Garage	So...Has anyone determined if the 2014 HUD is FULLY functional in the 2012s including the G force reading? __________________ 2012 2SS/RS LS3/M6 - C.A.I., Nightshade Tail Lights, ZL1 Fascia and Rockers, NightOwl Halo and Grille LED System, Bravado Americana Wheels With NT05 Rubber.

11-13-2014, 11:38 AM	#64
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,471 View My Garage	Any new info on this while I have my radio and center vent out? I have a 2013 and would like to swap it out for the colored HUD. I haven't seen any news from Ofer except it's on his site now for I think about $550 or so. __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

11-20-2014, 09:02 AM	#68
OVERPAR73 2018 Garnet Red ZL1 conve Drives: 2013 & 2018 ZL1 vert Join Date: May 2009 Location: Des Moines, IA Posts: 1,471 View My Garage	Any news on this HUD Ofer? Need a project to do over the holidays, just not sure about tearing the whole dash apart! __________________ Build Thread: 2018 ZL1 Vert Purchased (Overpar73)

11-20-2014, 09:22 AM	#69
Spartan01 Drives: Evil Eva, 2010 2SS LS3 Join Date: Aug 2013 Location: Falls Church, Virginia Posts: 3,600	I looked into this project for my 2010 SS, I was quoted $800-950 for the install. This was from 2 separate and highly rated install shops in my area... Just wanted to put a ballpark figure out there for people wanting to get this mod. Now for someone like Ofer, who has done this many times before, it would probably be a lot less. __________________ "You simply cannot trust quotes found on the internet." -Abraham Lincoln

09-05-2014, 08:35 PM	#58
hammdo 'It's an experiment' Drives: [COTW 2/09/15] '11 GPI LSA SC Z/LE Join Date: May 2014 Location: Dallas TX Posts: 8,694 View My Garage	Thanks! I think I'll time that with the MyLink upgrade so I can do that all @ once. Appreciate the assist! -Don

09-09-2014, 07:17 PM	#60
Vjc834 Drives: 2013 2SS 1LE Join Date: Jul 2013 Location: South Jersey Posts: 203 View My Garage	I thought I read somewhere that the 2014 HUD showed G forces and some other stuff that isn't on the 2013s.

11-13-2014, 12:05 PM	#65
2SSRS@Gen5diy Drives: 2014 Z/28 #82+#192, 18ZLE 66Nova Join Date: Oct 2008 Location: By the lake in AZ Posts: 15,719 View My Garage	It works on my 2010, tested on the car 2 days ago and it all works.