4.0" Pulley for a Maggie - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

ITGuy11 · 09-09-2012, 06:39 PM

Is there anywhere that I can buy a 4.0" pulley to run on a Maggie? I am aiming to run at 8 pounds of boost. I installed the OD cog drive setup, and people are getting around 9.5lbs with the OD cog and 3.8" pulley.

Supercharged SS · 09-09-2012, 06:46 PM

Biggest pulley I've ever seen is the 3.8. Try Ted or Jessiks @ Supercharger Connection

2010SSRSM6 · 09-10-2012, 03:23 AM

I'm in the same boat as you with the setup. I'm just going to ask the tuner to keep it safe and not go for max power until we forge the motor. Should be about 650rwhp.

Sent from my iPhone using Tapatalk

ITGuy11 · 09-10-2012, 11:53 AM

Found one:
http://www.lingenfelter.com/mm5/merc...Store_Code=LPE

Jessika · 09-12-2012, 12:06 PM

I can get you the pulley

I will even ship it to Chris' house to be funny

2010SSRSM6 · 09-12-2012, 02:23 PM

FYI,

Just finished up the tune, 625rwhp @ 9.5 pounds of boost with the cam, LT headers and CAI on 91 octane pump gas.

If that is too much boost, you may want that 4" pulley.

Thank you Jessika!!!!

Sent from my iPhone using Tapatalk

Jessika · 09-12-2012, 03:13 PM

BADASS!! I am happy for you!

ITGuy11 · 09-12-2012, 09:58 PM

Quote:

Originally Posted by Jessika

I can get you the pulley

I will even ship it to Chris' house to be funny

Ha ha, small world! Chris stopped by my house last night while I was working on the install. First question out of his mouth was did you get the blower from Jessika at Supercharger Connection? It is funny how people in this industry know each other even though they live all over the country.

Quote:

Originally Posted by 2010SSRSM6

FYI,

Just finished up the tune, 625rwhp @ 9.5 pounds of boost with the cam, LT headers and CAI on 91 octane pump gas.

If that is too much boost, you may want that 4" pulley.

Thank you Jessika!!!!

Sent from my iPhone using Tapatalk

Awesome numbers!

I will be finishing my install tomorrow, but I won't be able to get a dyno tune until the end of the month.

2010SSRSM6 · 09-12-2012, 11:55 PM

I can't remember which injectors you said you are using, but if you are going larger than what is included with the maggie kit, the maggie tune will not calibrate them well enough to keep the car idling.

I put FIC 850's in and had to take my ECU to CMS (my local shop and kick ass tuner) to get Ryne to flash a tune into it so I could get to his shop and get it finished off.

Car runs like a raped ape now. You are going to L O V E your new ride. Damn thing pulls in 6th gear.

09-09-2012, 06:39 PM	#1
ITGuy11 Burning up tires Drives: 2023 ZL1 Vert Join Date: Jul 2010 Location: Macomb Twp, MI Posts: 717	4.0" Pulley for a Maggie Is there anywhere that I can buy a 4.0" pulley to run on a Maggie? I am aiming to run at 8 pounds of boost. I installed the OD cog drive setup, and people are getting around 9.5lbs with the OD cog and 3.8" pulley.

09-10-2012, 03:23 AM	#3
2010SSRSM6 Drives: My wife crazy with my C5 usage. Join Date: Apr 2009 Location: DFW Posts: 6,558 View My Garage	I'm in the same boat as you with the setup. I'm just going to ask the tuner to keep it safe and not go for max power until we forge the motor. Should be about 650rwhp. Sent from my iPhone using Tapatalk __________________ UNDER CONSTRUCTION......again......

09-12-2012, 02:23 PM	#6
2010SSRSM6 Drives: My wife crazy with my C5 usage. Join Date: Apr 2009 Location: DFW Posts: 6,558 View My Garage	FYI, Just finished up the tune, 625rwhp @ 9.5 pounds of boost with the cam, LT headers and CAI on 91 octane pump gas. If that is too much boost, you may want that 4" pulley. Thank you Jessika!!!! Sent from my iPhone using Tapatalk __________________ UNDER CONSTRUCTION......again......

09-12-2012, 11:55 PM	#9
2010SSRSM6 Drives: My wife crazy with my C5 usage. Join Date: Apr 2009 Location: DFW Posts: 6,558 View My Garage	I can't remember which injectors you said you are using, but if you are going larger than what is included with the maggie kit, the maggie tune will not calibrate them well enough to keep the car idling. I put FIC 850's in and had to take my ECU to CMS (my local shop and kick ass tuner) to get Ryne to flash a tune into it so I could get to his shop and get it finished off. Car runs like a raped ape now. You are going to L O V E your new ride. Damn thing pulls in 6th gear. __________________ UNDER CONSTRUCTION......again......

09-09-2012, 06:46 PM	#2
Supercharged SS Account Suspended Drives: 2010 Camaro Join Date: Feb 2010 Location: Sandy Hook, CT Posts: 11,927	Biggest pulley I've ever seen is the 3.8. Try Ted or Jessiks @ Supercharger Connection

09-10-2012, 11:53 AM	#4
ITGuy11 Burning up tires Drives: 2023 ZL1 Vert Join Date: Jul 2010 Location: Macomb Twp, MI Posts: 717	Found one: http://www.lingenfelter.com/mm5/merc...Store_Code=LPE

09-12-2012, 12:06 PM	#5
Jessika Account Suspended Drives: Anything Blown Join Date: Aug 2010 Location: SoCal Posts: 1,194	I can get you the pulley I will even ship it to Chris' house to be funny

09-12-2012, 03:13 PM	#7
Jessika Account Suspended Drives: Anything Blown Join Date: Aug 2010 Location: SoCal Posts: 1,194	BADASS!! I am happy for you!