Installing a HUD by removing the Windshield - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

KenBaker · 11-28-2019, 11:57 AM

I have a 2010 Camaro and would really love to install a HUD Display. I also have a broken windshield. If I have someone pull out the Windshield, it seems like it would be straightforward to install it. You have to cut a hole in the top of the Dashboard anyway and could fish the wires down through the hole. Anyone accomplish this? Thanks

Coz3z3 · 11-28-2019, 02:55 PM

Doubt it's possible. The HUD screws to the top of the dash from the underside for one. And two, the hole you have to cut, I don't think would be big enough to finesse the HUD in. But, if you are doing both, I do know that the install would be a lot easier with the windshield out. Like getting the defroster vent, and actually pulling the dash out and putting back in. I know my hands were all over the glass a couple times. Plus, you can then replace your broken glass with a HUD glass.

Black_SS10 · 11-28-2019, 05:09 PM

Nuff said.

lemontwist · 11-28-2019, 06:34 PM

you have to pull the dash to do the hud. if you do it right you don't need to pull the windshield to pull the dash.
http://www.superchevy.com/how-to/int...fth-gen-camaro
i have mine from my car i'll sell you for 55 shipped

KenBaker · 12-01-2019, 06:12 PM

Thank you all for the feedback

11-28-2019, 11:57 AM	#1
KenBaker Drives: 2010 Camaro SS Join Date: Jan 2019 Location: Saint Charles MO Posts: 85	Installing a HUD by removing the Windshield I have a 2010 Camaro and would really love to install a HUD Display. I also have a broken windshield. If I have someone pull out the Windshield, it seems like it would be straightforward to install it. You have to cut a hole in the top of the Dashboard anyway and could fish the wires down through the hole. Anyone accomplish this? Thanks

11-28-2019, 05:09 PM	#3
Black_SS10 SomeguyK Drives: 2010 Black 2SS/RS Join Date: Nov 2014 Location: FL Posts: 1,947	Nuff said. Attached Images __________________ TMS 427, Dart iron Block, Forged assembly, Frankenstien heads, AGP TT 62/62 BB turbo's, AGP/Fore triple fuel system, Tilton clutch, Holley 1 7/8 shorties, Technostalgia tail lights,Oracle, Aeroforce, MGW shifter,Flowmaster, Pegasus subframe bushings,BMR trailing & toe arms,Z28 UCA bushings,Zl1 rear sway bar,Prothane,BMR,Goodridge brake lines,Ridetech HQ coilovers,3.91,Trutrac,billet caps,DSS axles,HE offest,built TR6060,1LE diffuser,Havoc spoiler,SSclones,20in MRR 017, Pirelli P Zero, Nitto NT555RII More to come.

11-28-2019, 02:55 PM	#2
Coz3z3 Drives: 2015 Z/28, 2015 1LE Join Date: Feb 2017 Location: Nevada Posts: 583	Doubt it's possible. The HUD screws to the top of the dash from the underside for one. And two, the hole you have to cut, I don't think would be big enough to finesse the HUD in. But, if you are doing both, I do know that the install would be a lot easier with the windshield out. Like getting the defroster vent, and actually pulling the dash out and putting back in. I know my hands were all over the glass a couple times. Plus, you can then replace your broken glass with a HUD glass.

11-28-2019, 06:34 PM	#4
lemontwist Drives: 12 2SS/RS L99,11 2SS/RS LS3totaled Join Date: Jun 2019 Location: mooresville nc Posts: 1,048	you have to pull the dash to do the hud. if you do it right you don't need to pull the windshield to pull the dash. http://www.superchevy.com/how-to/int...fth-gen-camaro i have mine from my car i'll sell you for 55 shipped

12-01-2019, 06:12 PM	#5
KenBaker Drives: 2010 Camaro SS Join Date: Jan 2019 Location: Saint Charles MO Posts: 85	Thank you all for the feedback