Intake setup

[rich2342]

Hi Folks,

I am thinking of adding either a Z/28 or Vararam intake along with Vmax ported throttle body and an intake spacer.

Do the spacers work? How would the combination of these fare on an otherwise stock untuned car?

Would there be a cumulative effect of gains with the three?

Thanks

[d454brisson]

I wouldn't do a spacer since what is it accomplishing on a Supercharged car. I did see a big difference in throttle response when I went with a ported LS2 TB for awhile from JRE, (putting up for sale if interested) I now have a 102MM Nick Williams.


Most use the Roto fab intake with solid results and good luck here. The combination Roto Fab and LS2 or Vmax is good un-tuned better once a part of a larger package.

[VRZL113]

Originally Posted by d454brisson

I wouldn't do a spacer since what is it accomplishing on a Supercharged car. I did see a big difference in throttle response when I went with a ported LS2 TB for awhile from JRE, (putting up for sale if interested) I now have a 102MM Nick Williams.


Most use the Roto fab intake with solid results and good luck here. The combination Roto Fab and LS2 or Vmax is good un-tuned better once a part of a larger package.

Sorry to thread jack, but did you notice any change in blower whine with the ported throttle body?

[rich2342]

Oops wrong forum. Should be in general SS not ZL1.
Specific.

**Mods please move..

[d454brisson]

From the Throttle body no noticeable sound change. From porting the blower and the 5inch yes but its not loud like a Hellcat or GT500, or at least not in the cabin.
DB