Quad tip diffuser - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Goo · 08-28-2013, 03:46 PM

Quote:

Originally Posted by jatt5ab1soorma

22815277, is that the # for quad tip diffuser? i looked it on gm and it said its for 78$? and it was added to cart as fascia? just wanna make sure before i order that its the correct part because there no picture of it on the gm site.

Yes, that is the correct part number.
Here is another thread talking about it.
http://www.camaro5.com/forums/showthread.php?t=285088

And yes - the price dropped below $100.

jatt5ab1soorma · 08-28-2013, 04:03 PM

thank u

, ORDERED!

Cruzader · 11-30-2013, 05:00 PM

Quote:

Originally Posted by jatt5ab1soorma

thank u

, ORDERED!

And so? Was it the correct part?!? Because there they also show it as "fascia"...
http://orders.partstaxi.com/parts/in...&siteid=215330
And where did you ordered them from, below $80?

GAHDOOSH · 12-02-2013, 06:35 PM

About 4 months ago I read on here you could get one for just over $100 straight from GM
Check the old threads.

Gamecock SS · 12-14-2014, 11:48 AM

Quote:

Originally Posted by ssmike

I cut mine out with a saber saw and then lined the cut edges with door edge trim from AutoZone. It was a very easy mod and only took 1 hour start to finish! The quad tips are Solo dual wall stainless 3" and had a local muffler shop weld them in. Just make sure they get the tips perfect before welding in!

Do you have the width measurements of each cut? I really would like to do this..

StingrayblueSS · 03-12-2017, 01:34 PM

Did anyone notice a sound deference with this exhaust mod.

1JEWLDSSRS · 03-12-2017, 07:29 PM

Quote:

Originally Posted by ssmike

I cut mine out with a saber saw and then lined the cut edges with door edge trim from AutoZone. It was a very easy mod and only took 1 hour start to finish! The quad tips are Solo dual wall stainless 3" and had a local muffler shop weld them in. Just make sure they get the tips perfect before welding in!

Got a question for you guys, what mufflers do you have behind these tips? I did this conversion and had a Dynomax axleback on there and the shop I went to and had the tips installed couldn't line the tips up using my existing system, so we straight piped it....WAY too loud as I have LT's and no cats. So I took them off and put my axleback back on, but I really loved the quad tip look and want them back on, another shop I went to said it couldn't be done due to the angle of the pipe coming out of the rear of the mufflers. Any suggestions ?? Thanks all.

1JEWLDSSRS · 03-13-2017, 09:49 AM

Bump,,, anyone ??? Thanks

anth331 · 03-23-2017, 04:06 AM

I had Quad tips on my 14 LS I also had the Dynomax axle back exhaust.
I took it to a muffler shop in north Houston. They had it done in about an hour and a half. They even painted my mufflers black so, they wouldn't be seen as easily. Their tips and welding it on was 200 tax and everything.

rjohnson009 · 09-24-2021, 11:05 AM

I have diffuser part # 22815277 for sale $50 + shipping if anyone is interested. Still in the plastic wrapping. Was planning to do an upgrade for my daughters 2013 but it was totaled.

Bigalamo · 11-04-2021, 04:32 PM

Quote:

Originally Posted by rjohnson009

I have diffuser part # 22815277 for sale $50 + shipping if anyone is interested. Still in the plastic wrapping. Was planning to do an upgrade for my daughters 2013 but it was totaled.

Is this still available? Also, would it fit 4” quad tips?

1JEWLDSSRS · 11-04-2021, 06:27 PM

Quote:

Originally Posted by Bigalamo

Is this still available? Also, would it fit 4” quad tips?

Yes it will allow for 4 inch quad tips..

Name: 335-4.JPG
Views: 178
Size: 368.7 KB

Name: 335-5.JPG
Views: 177
Size: 332.4 KB

12-02-2013, 06:35 PM	#18
GAHDOOSH GAHDOOSH Drives: 2016 Camaro 1SS Join Date: Apr 2013 Location: Greenville, South Carolina Posts: 502 View My Garage	About 4 months ago I read on here you could get one for just over $100 straight from GM Check the old threads. __________________ GAHDOOSH 2016 1SS 6.2L LT1 Manual 6-Speed, Front Emblem Blackout, Rear Bowtie Delete, Side emblem delete, Phastek Side Marker Tint, GM Black Taillights, $23.57 of Premium Gas this morning

03-13-2017, 09:49 AM	#22
1JEWLDSSRS Drives: 2011 SS-RS Join Date: May 2011 Location: FLORIDA Posts: 11,426	Bump,,, anyone ??? Thanks __________________ TSP STAGE 3 CAM,231/246 @112 LSA 614/641 LIFT, CIRCLE D 5C-4200-4500 CONVERTER,LOD INTAKE.CORSA EXHAUST. DSS 1 PC DS. PEGASUS SOLID CRADLE MOUNTS. 486RWHP/475RWTQ.LOTS MORE.

03-23-2017, 04:06 AM	#23
anth331 Drives: 12SS Join Date: Apr 2010 Location: Dayton, Tx. 77535 Posts: 728	I had Quad tips on my 14 LS I also had the Dynomax axle back exhaust. I took it to a muffler shop in north Houston. They had it done in about an hour and a half. They even painted my mufflers black so, they wouldn't be seen as easily. Their tips and welding it on was 200 tax and everything. Attached Images

08-28-2013, 04:03 PM	#16
jatt5ab1soorma Drives: Camaro 2011 LS Join Date: Jun 2011 Location: NY Posts: 253	thank u , ORDERED!

03-12-2017, 01:34 PM	#20
StingrayblueSS Drives: 2013 Camaro SS Join Date: Feb 2017 Location: Indiana Posts: 901	Did anyone notice a sound deference with this exhaust mod.

09-24-2021, 11:05 AM	#24
rjohnson009 Drives: 2013 Camaro Join Date: May 2013 Location: United States Posts: 1	I have diffuser part # 22815277 for sale $50 + shipping if anyone is interested. Still in the plastic wrapping. Was planning to do an upgrade for my daughters 2013 but it was totaled.