carbon fiber spoiler - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Sinister10 · 02-04-2019, 04:52 PM

https://www.ebay.com/i/372235320526?ul_noapp=true

seams too good to be true. its by IKON, can anyone give advice on this item?

SSEssence · 02-04-2019, 05:01 PM

It looks like their polyethylene spoiler skinned in real CF over it.

Sinister10 · 02-04-2019, 05:15 PM

does IKON make a decent quality part? For under $100. i might just take a chance and buy it.

JoelNR · 02-05-2019, 10:05 AM

Ikon seems to be generally well regarded for fit and finish. I would buy it for that price.

The only thing you really need to do before installing it is to get a roll of good quality double stick foam tape to place between the spoiler and the trunk lid. If you don't it'll chafe the paint at the contact points and it doesn't look like it comes with any.

silverstorm · 02-05-2019, 10:33 AM

I recently bought a spoiler from Ikon and I sent them a message to ask if any hardware was included and they replied saying they do send a double sided tape, but I'd still buy extra for extra support. I've had one of their spoilers before and its good quality for a cheaper price.

Sinister10 · 02-05-2019, 08:23 PM

thanks for the replies. i went ahead and purchased it. ill chime back when it comes in.

Sinister10 · 02-08-2019, 06:53 PM

received the spoiler today, i must say, looks pretty nice. A little concerned about durability, but seeing that the car only sees nice days and is garage kept, i hope it will last. Looking forward to seeing it on the car.

Now i have the itch for more carbon fiber!!!

if anybody knows where to get decent carbon fiber pieces (interior and exterior) at an affordable price, please let me know.

02-04-2019, 04:52 PM	#1
Sinister10 Drives: 2010 Camaro SS Join Date: Jul 2018 Location: Indiana Posts: 543	carbon fiber spoiler https://www.ebay.com/i/372235320526?ul_noapp=true seams too good to be true. its by IKON, can anyone give advice on this item? __________________ 2010 2SS/RS 6M, MGW flatstick, CAI cold air intake, SLP loudmouth 2 axleback, TSP 1 7/8 headers w/ hfc, pfadt 1" springs, SRP pedals, emblempros "6.2L" emblems on hood, ZL1 grill, M/T SC-5 wheels, nitto motivo 275f 315r. ZL1 addons wickerbill, smoked lenses, resonator delete x pipe, diode dynamics DRLs 1LE suede steering wheel, mighty mouse CC. SCTX4 and Dyno Steve tune.

02-04-2019, 05:01 PM	#2
SSEssence Instagram: Sangstah Drives: 2019 Camaro 1LE Join Date: Sep 2016 Location: Buena Park, CA. Posts: 2,803 View My Garage	It looks like their polyethylene spoiler skinned in real CF over it. __________________ 2019 SS 1LE - "CaSSandra" 2014 SS - "AleSSandra - Sold" 94 Z28 - Sold Follow the build https://www.camaro6.com/forums/showthread.php?t=612717

02-04-2019, 05:15 PM	#3
Sinister10 Drives: 2010 Camaro SS Join Date: Jul 2018 Location: Indiana Posts: 543	does IKON make a decent quality part? For under $100. i might just take a chance and buy it. __________________ 2010 2SS/RS 6M, MGW flatstick, CAI cold air intake, SLP loudmouth 2 axleback, TSP 1 7/8 headers w/ hfc, pfadt 1" springs, SRP pedals, emblempros "6.2L" emblems on hood, ZL1 grill, M/T SC-5 wheels, nitto motivo 275f 315r. ZL1 addons wickerbill, smoked lenses, resonator delete x pipe, diode dynamics DRLs 1LE suede steering wheel, mighty mouse CC. SCTX4 and Dyno Steve tune.

02-05-2019, 10:05 AM	#4
JoelNR King of the Lurkers Drives: 2010 SS/RS (Victory Red) Join Date: Dec 2016 Location: KC, MO Posts: 31	Ikon seems to be generally well regarded for fit and finish. I would buy it for that price. The only thing you really need to do before installing it is to get a roll of good quality double stick foam tape to place between the spoiler and the trunk lid. If you don't it'll chafe the paint at the contact points and it doesn't look like it comes with any. __________________ '10 SS/RS M6 The go: ESS supercharger kit, Speed Engineering headers, NGK TR6IX plugs, ZR1 MAP sensor, DSS driveshaft, BMR trailing arms & toe rods. 610 HP/556 TQ. Tuned by Ryan at KC Maxx Performance. The less important bits: MRR 228s, SLP front lip, ZL1 grille (no bowtie), Z28 spoiler with ZL1 Addons wickerbill, RPID tow hook, Sparks Restoration SS trunk emblem, ZL1 rear & Phastek front rock guards.

02-05-2019, 08:23 PM	#6
Sinister10 Drives: 2010 Camaro SS Join Date: Jul 2018 Location: Indiana Posts: 543	thanks for the replies. i went ahead and purchased it. ill chime back when it comes in. __________________ 2010 2SS/RS 6M, MGW flatstick, CAI cold air intake, SLP loudmouth 2 axleback, TSP 1 7/8 headers w/ hfc, pfadt 1" springs, SRP pedals, emblempros "6.2L" emblems on hood, ZL1 grill, M/T SC-5 wheels, nitto motivo 275f 315r. ZL1 addons wickerbill, smoked lenses, resonator delete x pipe, diode dynamics DRLs 1LE suede steering wheel, mighty mouse CC. SCTX4 and Dyno Steve tune.

02-05-2019, 10:33 AM	#5
silverstorm Drives: 2014 Camaro 2LS Join Date: Mar 2018 Location: Nashville, TN Posts: 213 View My Garage	I recently bought a spoiler from Ikon and I sent them a message to ask if any hardware was included and they replied saying they do send a double sided tape, but I'd still buy extra for extra support. I've had one of their spoilers before and its good quality for a cheaper price.

02-08-2019, 06:53 PM	#7
Sinister10 Drives: 2010 Camaro SS Join Date: Jul 2018 Location: Indiana Posts: 543	received the spoiler today, i must say, looks pretty nice. A little concerned about durability, but seeing that the car only sees nice days and is garage kept, i hope it will last. Looking forward to seeing it on the car. Now i have the itch for more carbon fiber!!! if anybody knows where to get decent carbon fiber pieces (interior and exterior) at an affordable price, please let me know. __________________ 2010 2SS/RS 6M, MGW flatstick, CAI cold air intake, SLP loudmouth 2 axleback, TSP 1 7/8 headers w/ hfc, pfadt 1" springs, SRP pedals, emblempros "6.2L" emblems on hood, ZL1 grill, M/T SC-5 wheels, nitto motivo 275f 315r. ZL1 addons wickerbill, smoked lenses, resonator delete x pipe, diode dynamics DRLs 1LE suede steering wheel, mighty mouse CC. SCTX4 and Dyno Steve tune.