LS3 Procharger Dyno, 752hp/662trq - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Big Turkey · 12-30-2010, 09:32 PM

Not a Camaro but I thought I'd share with you guys as well since not alot of LS3 guys on the Corvette forums have boosted their cars. I actually come to this forum alot to read in this section for info.

I finally got my Procharger on my Vette. I installed the same clutch at the same time so I was breaking it in for the past 2 weeks and doing some street tuning.

I did most of the tuning on the street with a wideband but the car was making good power and I couldn't hook on Invos, so I couldn't take it to redline.

Well after swapping out to a fresh set of plugs I strapped the car to the dyno for some final tuning.

First pull I pulled it to 5400RPMs and the car made 686hp.the AFR showed 14:1 but I had thought the dyno's wideband was fishy, so I swapped it out for a new 02. I added some fuel to compensate and sure enough the pull was dead rich. Shutting off at 6000 It made 721hp.

I took the fuel I added back out, set the timing at 14* peak and let it rip. AFR ended at 11.0:1 with the methanol active.. and the car made 752hp/662trq!!

To prolong the life of the shortblock, I decided that was enough for today.

Not bad for a D1 Procharger @ 10psi and some pump gas w/ meth!

Here's a quick video:

LS3 Procharger Dyno

And the dyno sheet:

And another dyno sheet for comparison's sake:

Since it's a little damp and humid as hell down in Houston, I can't get any traction whatsoever so I haven't gotten a chance to even enjoy the newfound power!

g4dadon · 12-30-2010, 09:35 PM

Nice!!! awesome numbers especially at that boost level and timing!!!

2010 SSRS · 12-30-2010, 09:38 PM

bad azz

Bad70supreme · 12-30-2010, 09:38 PM

That is insane!!!!! How long do you expect the short block to last? LS3=monster

Big Turkey · 12-30-2010, 10:31 PM

Hopefully forever that's why I stopped at that power level.

I think the car had a good 820-830whp in it.. if I had some more balls and some race gas. I have the meth at a very low level coming on very conservatively but at 800whp I am worried about the rods and lifting the heads.

Bad70supreme · 12-31-2010, 12:15 PM

Thats awesome, I hope it holds up for you...that shows how strong these stock short blocks really are!

JUISSD · 01-01-2011, 02:09 AM

Great numbers Wally! That thing is going to be a beast on the street!

J-Rod6410 · 01-01-2011, 11:54 PM

Very impressive! Saw this car at your meet and greet the other day at your shop. Sounds like a monster

Big Turkey · 01-03-2011, 10:27 PM

Hey jrod sorry if I didn't get a chance to say hi I was trying to get to meet everyone. If you are close stop by and hang out anytime!

Wally

coronado89 · 01-03-2011, 10:40 PM

I just finished my install today.. procharger f-1d.. just cant push it to the limit. Still waiting for the Fore Precision hat to install my fuel system..

mikepage0007 · 01-03-2011, 11:08 PM

was that 752 rwhp or @ the flywheel?

dmax86 · 01-04-2011, 10:31 AM

I'm jealous! Haha... I can't wait for my pulley and meth!!!

Don't forget to tell us about your F430 kill Wally!!

Big Turkey · 01-15-2011, 03:58 PM

Quote:

Originally Posted by mikepage0007

was that 752 rwhp or @ the flywheel?

Numbers are @ the wheels.

I blew an intercooler pipe racing that Ferrari so it's not a good story! I was still 4-5 cars ahead in 1 gear though!

I really need to get some NT05R's. The car only hooks from a 80mph roll.. I feel like a Supra... not able to have fun in it if I tried!

Z_Rocks · 01-15-2011, 04:07 PM

Quote:

Originally Posted by Big Turkey

Everything is bigger in Texas.. even the asians.

12-30-2010, 09:32 PM	#1
Big Turkey Auto Adrenaline Drives: 09 C6 Join Date: Dec 2009 Location: Houston, TX Posts: 45	LS3 Procharger Dyno, 752hp/662trq Not a Camaro but I thought I'd share with you guys as well since not alot of LS3 guys on the Corvette forums have boosted their cars. I actually come to this forum alot to read in this section for info. I finally got my Procharger on my Vette. I installed the same clutch at the same time so I was breaking it in for the past 2 weeks and doing some street tuning. I did most of the tuning on the street with a wideband but the car was making good power and I couldn't hook on Invos, so I couldn't take it to redline. Well after swapping out to a fresh set of plugs I strapped the car to the dyno for some final tuning. First pull I pulled it to 5400RPMs and the car made 686hp.the AFR showed 14:1 but I had thought the dyno's wideband was fishy, so I swapped it out for a new 02. I added some fuel to compensate and sure enough the pull was dead rich. Shutting off at 6000 It made 721hp. I took the fuel I added back out, set the timing at 14* peak and let it rip. AFR ended at 11.0:1 with the methanol active.. and the car made 752hp/662trq!! To prolong the life of the shortblock, I decided that was enough for today. Not bad for a D1 Procharger @ 10psi and some pump gas w/ meth! Here's a quick video: LS3 Procharger Dyno And the dyno sheet: And another dyno sheet for comparison's sake: Since it's a little damp and humid as hell down in Houston, I can't get any traction whatsoever so I haven't gotten a chance to even enjoy the newfound power! __________________ Auto Adrenaline Performance www.autoadrenalineperformance.com 281.969.7162 Like us on Facebook! http://www.facebook.com/autoadrenalineperformance

12-30-2010, 09:38 PM	#3
2010 SSRS Drives: 3 V8 Camaros Join Date: May 2009 Location: The Ocean State Posts: 111,187 View My Garage	bad azz __________________ Jannetty Racing JRE Street Package

12-30-2010, 09:38 PM	#4
Bad70supreme Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010 Location: plainfield, IL Posts: 2,706	That is insane!!!!! How long do you expect the short block to last? LS3=monster __________________ 10.91 at 122 H/C stock block N/A

12-30-2010, 10:31 PM	#5
Big Turkey Auto Adrenaline Drives: 09 C6 Join Date: Dec 2009 Location: Houston, TX Posts: 45	Hopefully forever that's why I stopped at that power level. I think the car had a good 820-830whp in it.. if I had some more balls and some race gas. I have the meth at a very low level coming on very conservatively but at 800whp I am worried about the rods and lifting the heads. __________________ Auto Adrenaline Performance www.autoadrenalineperformance.com 281.969.7162 Like us on Facebook! http://www.facebook.com/autoadrenalineperformance

12-31-2010, 12:15 PM	#6
Bad70supreme Drives: 2010 aqua blue SS/RS M6 Join Date: Feb 2010 Location: plainfield, IL Posts: 2,706	Thats awesome, I hope it holds up for you...that shows how strong these stock short blocks really are! __________________ 10.91 at 122 H/C stock block N/A

12-30-2010, 09:35 PM	#2
g4dadon Straight Performance Racn Drives: Anything over 600rwhp Join Date: May 2010 Location: Baton Rouge, Louisiana Posts: 211	Nice!!! awesome numbers especially at that boost level and timing!!!

01-01-2011, 02:09 AM	#7
JUISSD Drives: 2010 White/IOM 2SS/RS M6 Join Date: Jul 2010 Location: Houston, TX Posts: 1,228	Great numbers Wally! That thing is going to be a beast on the street! __________________ 2010 White/IOM Camaro 2SS/RS M6

01-01-2011, 11:54 PM	#8
J-Rod6410 M6 9 second club Drives: A 4000 Lb BeaSSt Join Date: Jul 2009 Location: Crackin Azz on a hi-way near you Posts: 1,033 View My Garage	Very impressive! Saw this car at your meet and greet the other day at your shop. Sounds like a monster __________________ TEAM LS3 Best pass: 9.61 @ 146 with M6 TBDRWHP TBDRWTQ ECS S/C 408, YSi, m6, Mantic Triple, ZL1 diff #BuiltByJRod.... J-Rod's Speed Shop.... Tuned by: Matt Sorian @ MS Tuning Check out my youtube channel: http://www.youtube.com/user/6410Jrod Follow me on Instagram: @J_Rod6410

01-03-2011, 10:27 PM	#9
Big Turkey Auto Adrenaline Drives: 09 C6 Join Date: Dec 2009 Location: Houston, TX Posts: 45	Hey jrod sorry if I didn't get a chance to say hi I was trying to get to meet everyone. If you are close stop by and hang out anytime! Wally __________________ Auto Adrenaline Performance www.autoadrenalineperformance.com 281.969.7162 Like us on Facebook! http://www.facebook.com/autoadrenalineperformance

01-03-2011, 10:40 PM	#10
coronado89 Drives: 2010 SS F1-D procharger, Join Date: Jul 2009 Location: Brownsville, Tx Posts: 126	I just finished my install today.. procharger f-1d.. just cant push it to the limit. Still waiting for the Fore Precision hat to install my fuel system..

01-03-2011, 11:08 PM	#11
mikepage0007 Drives: 2010 camaro Join Date: Aug 2009 Location: port st lucie ,florida Posts: 4,273	was that 752 rwhp or @ the flywheel? __________________

01-04-2011, 10:31 AM	#12
dmax86 Drives: 2016 Z06 C7R Join Date: Apr 2010 Location: HOUSTON, TEXAS Posts: 1,019 View My Garage	I'm jealous! Haha... I can't wait for my pulley and meth!!! Don't forget to tell us about your F430 kill Wally!! __________________ 2013 ZL1 BONE STOCK! LOL

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
Official LS3 Dyno Thread	tjbusa	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	760	04-25-2024 01:31 PM
Unofficial 1/4 Mile (V8) 2010+ Camaro Fast List	Merc	Dragstrip and Launch Techniques Discussion	250	04-01-2014 10:40 AM
Texas Speed Engine Dyno L99 Baseline Vs. LS3 Baseline	Jon@Texas-Speed	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	6	07-21-2010 03:55 PM
Check your Order here	bvonscott	Camaro Price \| Ordering \| Tracking \| Dealers Discussions	665	06-29-2009 01:00 PM