You are browsing camaro5 
 |
|
09-01-2019, 04:12 PM
|
#1 |
|
Gearhead
Drives: 2012 ZL1 Join Date: Jun 2014
Location: Michigan
Posts: 252
|
Weld S71 17" wheel/tire set
For sale is a set of Weld S71 17" wheels with tires. The fronts are 17x5" (71HB7050N22A) with Mickey Thompson Sportsman SR radials in 28x6". The rears are 17x10" (71HB7100N72A) with Mickey Thompson ET Street R radials in 305/45R17.
The tires have five (5) total 1/4-mile passes and about 90 highway miles on them. The rear tires have a "0916" date code (manufactured 9th week of 2016), and the fronts have a "0216" code (2nd week of 2016). The wheels have only been cleaned with soap and water, and the faces are in very good condition with the exception of a small mark near the valve stem of one rear (the victim of some sloppy handling of an inflation chuck), and some minor staining inside the lug nut bores. The polished portion of the inside rear of the wheels have some pitting from brake dust and scuffs from installation that would clean up with some amount of effort (more than I would want to do by hand). The fronts have clip-on weights installed on the inside lip; the rears have stick-on weights covered with duct tape. This set fit without modification on my 2012 ZL1 at stock ride height. It is up to prospective buyers to confirm fitment on their vehicles prior to purchase. Asking $2900 shipped to the lower 48. If the buyer can meet me FTF (SW MI - Grand Rapids/lakeshore area) or make their own shipping arrangements, then the price can be adjusted accordingly. SOLD PENDING FUNDS/PICKUP
__________________
 2012 Chevrolet Camaro ZL1 M6 - JRE 650 RWHP kit, AFCO heat exchanger, JPSS V4 aero, Z28 wheels for the twisties and Weld big-n-littles for the dragstrip. 11.193@128.13 in 515' DA Last edited by E. Bryant; 09-08-2019 at 03:31 PM. |
|
|
|
09-02-2019, 11:00 PM
|
#2 |
 
Drives: 2013 Zl1 Join Date: Feb 2019
Location: Minnesota
Posts: 18
|
What's estimated shipping to Mpls mn
!
|
|
|
|
|
09-02-2019, 11:04 PM
|
#3 |
   
Drives: 2010 Black 2ss Camaro SS Join Date: May 2010
Location: Rochester Hills, MI
Posts: 1,060
|
If you separate, i would be interested in the fronts. I can also pick up.
__________________
ZL1 10 spokes,Dart 388,ECS Supercharger 2200x, E85 Flex Fuel sensor, Dart 388 , B&M Tranny Cooler, Vigilante 4000 Triple Disc TC,Katech Ported Heads, Texas Speed Sheet Metal Intake, ECS Big Blower Cam,ID 1700s, Fore Triple Pumps, E85,ATI Super Dampner, KW V3 Coilovers, Pfadt front and rear sway bars,Pfadt Trailing arms and toe rods,ZL1 Rear Diff, RPM 6l90e level 10 Tranny, SW Long Tubes no cats,Nick Williams Boosted 102mm TB, Dr Phil Tune,Borla Atak
|
|
|
|
|
09-03-2019, 02:32 AM
|
#4 |
|
Drives: 2012 Camaro SS Join Date: Sep 2018
Location: Bay Area
Posts: 29
|
If you separate I’d be interested in the rears!!
Sent from my iPhone using Tapatalk |
|
|
|
|
09-03-2019, 01:22 PM
|
#5 |
|
Gearhead
Drives: 2012 ZL1 Join Date: Jun 2014
Location: Michigan
Posts: 252
|
Spoof, shipping to Minneapolis looks to be about $250. My asking price includes ground shipping.
Chris and gm2376, I'd be willing to separate the package into fronts and rears if there are solid offers for both. Shoot me a PM and we can go into details.
__________________
2012 Chevrolet Camaro ZL1 M6 - JRE 650 RWHP kit, AFCO heat exchanger, JPSS V4 aero, Z28 wheels for the twisties and Weld big-n-littles for the dragstrip. 11.193@128.13 in 515' DA |
|
|
|
|
09-06-2019, 07:29 AM
|
#6 | |
|
Drives: 2010 Black 2ss Camaro SS Join Date: May 2010
Location: Rochester Hills, MI
Posts: 1,060
|
Quote:
thanks
__________________
ZL1 10 spokes,Dart 388,ECS Supercharger 2200x, E85 Flex Fuel sensor, Dart 388 , B&M Tranny Cooler, Vigilante 4000 Triple Disc TC,Katech Ported Heads, Texas Speed Sheet Metal Intake, ECS Big Blower Cam,ID 1700s, Fore Triple Pumps, E85,ATI Super Dampner, KW V3 Coilovers, Pfadt front and rear sway bars,Pfadt Trailing arms and toe rods,ZL1 Rear Diff, RPM 6l90e level 10 Tranny, SW Long Tubes no cats,Nick Williams Boosted 102mm TB, Dr Phil Tune,Borla Atak
|
|
|
|
|
|
09-06-2019, 05:26 PM
|
#7 |
|
Drives: 2012 Camaro SS Join Date: Sep 2018
Location: Bay Area
Posts: 29
|
Sent you a PM regarding the rears!
Sent from my iPhone using Tapatalk |
|
|
|
|
09-07-2019, 09:52 PM
|
#8 |
|
Gearhead
Drives: 2012 ZL1 Join Date: Jun 2014
Location: Michigan
Posts: 252
|
PMs returned. Sorry about the delay - I wasn't getting notification of new PMs.
__________________
2012 Chevrolet Camaro ZL1 M6 - JRE 650 RWHP kit, AFCO heat exchanger, JPSS V4 aero, Z28 wheels for the twisties and Weld big-n-littles for the dragstrip. 11.193@128.13 in 515' DA |
|
|
|
|
09-07-2019, 10:01 PM
|
#9 | |
|
Drives: 2010 Black 2ss Camaro SS Join Date: May 2010
Location: Rochester Hills, MI
Posts: 1,060
|
Quote:
__________________
ZL1 10 spokes,Dart 388,ECS Supercharger 2200x, E85 Flex Fuel sensor, Dart 388 , B&M Tranny Cooler, Vigilante 4000 Triple Disc TC,Katech Ported Heads, Texas Speed Sheet Metal Intake, ECS Big Blower Cam,ID 1700s, Fore Triple Pumps, E85,ATI Super Dampner, KW V3 Coilovers, Pfadt front and rear sway bars,Pfadt Trailing arms and toe rods,ZL1 Rear Diff, RPM 6l90e level 10 Tranny, SW Long Tubes no cats,Nick Williams Boosted 102mm TB, Dr Phil Tune,Borla Atak
|
|
|
|
|
|
|
|
|
 |
| Thread Tools | |
|
|
