New LS3 416cu Forged Motor - Page 2 - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

YOUNGnRECKLESS · 01-12-2012, 08:48 PM

wow bump for a great deal. wish i had the money, you're so close by...great setup.

glws

jsharp · 01-12-2012, 08:48 PM

More info on head work

SlowLS3 · 01-13-2012, 12:25 AM

Quote:

Originally Posted by jsharp

More info on head work

The heads was done by Cartek, double valve springs, new valve seals, new Titanium retainers and some porting, the car made 738rwhp with these heads on my stock motor with a F1 Cam and 12lbs boost which was done by Cartek.

SlowLS3 · 01-13-2012, 12:39 AM

Quote:

Originally Posted by jsharp

Send me pics does include all bolt on parts like water pump pulleys alternater so forth

Water pump and alternator are not included, will post some pictures tomorrow.

SlowLS3 · 01-13-2012, 08:18 AM

Quote:

Originally Posted by Kumar07

can u post up pics of it.. and how much hp and tq will it add

jsharp · 01-13-2012, 09:26 AM

So can u sell stock longblock for 5k if it sits like this one? Can you get me some info on
clearances:Piston to wall, ring end gap, rod side clearance, pin clearance, main bearing clearance, rod clearance, values it was torqued to, and what additional prep work was done to the block besides basic machining

SlowLS3 · 01-13-2012, 09:38 AM

Quote:

Originally Posted by jsharp

So can u sell stock longblock for 5k if it sits like this one? Can you get me some info on
clearances:Piston to wall, ring end gap, rod side clearance, pin clearance, main bearing clearance, rod clearance, values it was torqued to, and what additional prep work was done to the block besides basic machining

http://www.camaro5.com/forums/showthread.php?t=192939 When I said $5k I was referring to a stock LS3 motor I had which was sold for $5k and here is another selling for $5200.00.
Can you call my builder and tell him its Mario Second LS3 motor which was built as a spare, his name is Mike (a very nice guy) and his number is 1 732 232 8174 from MCP Engine Builders.
Mike will answer any question you have pertaining to this motor.

jsharp · 01-13-2012, 10:05 AM

Thanks. Ok mine has dod/afm delete and cam springs and such with no intake manifold was l99 to ls3 coverted

jsharp · 01-13-2012, 11:35 AM

Mike did not know brand of springs and such do you? Also does it have oil pan?

SlowLS3 · 01-13-2012, 11:55 AM

Quote:

Originally Posted by jsharp

Mike did not know brand of springs and such do you? Also does it have oil pan?

Well I guess you spoke to Mike, yes the heads was done by Cartek and the springs are dual Comp Cam 921. Yes it have the oil pan, oil pump and pickup with strainer, the motor is closed ready for install.

jsharp · 01-13-2012, 11:58 AM

Ok thanks my builder is checking specs says piston to wall clearance is huge so waiting on his imput

SlowLS3 · 01-18-2012, 07:32 AM

Quote:

Originally Posted by SlowLS3

Still for sale at a great deal

SlowLS3 · 01-25-2012, 08:10 AM

Quote:

Originally Posted by SlowLS3

Still for sale at a great deal

bump

ColdCamaroSS · 02-15-2012, 10:13 PM

Awesome deal, I so want to pull the trigger on this engine. GLWS! Any video of your current engine running since you say this is very close, spec wise?

01-12-2012, 08:48 PM	#15
YOUNGnRECKLESS Building the Beast Drives: 2010 VR LS3 Join Date: Oct 2010 Location: Queens, New York Posts: 1,398 View My Garage	wow bump for a great deal. wish i had the money, you're so close by...great setup. glws __________________

01-12-2012, 08:48 PM	#16
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	More info on head work __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

01-13-2012, 09:26 AM	#20
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	So can u sell stock longblock for 5k if it sits like this one? Can you get me some info on clearances:Piston to wall, ring end gap, rod side clearance, pin clearance, main bearing clearance, rod clearance, values it was torqued to, and what additional prep work was done to the block besides basic machining __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

01-13-2012, 10:05 AM	#22
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Thanks. Ok mine has dod/afm delete and cam springs and such with no intake manifold was l99 to ls3 coverted __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

01-13-2012, 11:35 AM	#23
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Mike did not know brand of springs and such do you? Also does it have oil pan? __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

01-13-2012, 11:58 AM	#25
jsharp NOW CAMMED & SUPERCHARGED Drives: 2010 Camaro 2SS/RS Black w/ IOM Join Date: Oct 2008 Location: Ar Posts: 2,336	Ok thanks my builder is checking specs says piston to wall clearance is huge so waiting on his imput __________________ Livernois Motorsports: Maggie 2300 7psi, Livernois 2C cam/L99 to LS3 Conversion, Ported TB, Rotofab w/adm race scoop, adm trans cooler,Kooks headers no cats, Kooks 3" exhaust. METCO breather. Precision 2400 Vigilante TC. Eibach Lowering Springs & Swaybars. BMR Trailing arms, BMR Rear Cradle Bushings, BMR Toe Rods, BMR Differential bushings. Vossen CV3 20's w/ 305 Mickey Thompson @25psi. Zl1 front bumper. OE Zl1 Hood and matte black insert. 556RWHP/500RWTQ L99

02-15-2012, 10:13 PM	#28
ColdCamaroSS Drives: 1 Join Date: Mar 2010 Location: 2 Posts: 412	Awesome deal, I so want to pull the trigger on this engine. GLWS! Any video of your current engine running since you say this is very close, spec wise?

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
LS3 motor mount bolt	Coop	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	12	12-13-2010 07:23 AM
LS3 motor parts	fuffl	V8 - Engine, Exhaust, Bolt-Ons, Tuning Equipment	11	04-08-2010 06:46 PM
SPONSORS - 427 Forged LS3 Shortblock	StrictlyPro	Camaro V8 LS3 / L99 Engine, Exhaust, and Bolt-Ons	17	03-10-2010 05:38 PM
Great Read and Info on Oil Weight	Banshee	Mechanical Maintenance: Break-in / Oil & Fluids / Servicing	1	11-23-2009 09:03 PM