ZL1 Hood Extractor - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Vette TPI · 01-05-2014, 09:25 PM

Would someone please measure their Camaro ZL1 "Mohawk" hood extractor on top of the hood and please get me some dimensions in inches?

Vette TPI · 01-05-2014, 09:58 PM

This piece?

Vette TPI · 01-06-2014, 09:41 AM

Bump, I hope I didn't ask for some top secret numbers

I just want to measure if it will fit on my hood. I know it will fit a Camaro stock hood, but I don't have one

Matt@510 · 01-06-2014, 11:11 AM

im not sure that piece from acs is exactly the same size as gm unit. you could call acs and see what the dimensions are.

are you planning on putting the heat extractor on a c4? that might be cool.

Vette TPI · 01-06-2014, 08:39 PM

Quote:

Originally Posted by Matt@510

im not sure that piece from acs is exactly the same size as gm unit. you could call acs and see what the dimensions are.

are you planning on putting the heat extractor on a c4? that might be cool.

I was probably actually going to order the one from phastek because i found the whole kit to go on the base and ss camaros. I am planning on putting it on my C4 because I want more down force along with heat extraction. Haven't found a splitter for the C4 that I like though..

Vette TPI · 01-07-2014, 12:11 PM

Haha so many views and no replies? It would take less than five minutes. Can someone please just take a quick measurement?

Angrybird 12 · 01-07-2014, 12:22 PM

I am pretty sure the ACS one is the same size as the ZL1 extractor, they sell one for each hood and it's my understanding the only difference is the way they are mounted. The ZL1 hood extractor has mounting points the same as the Factory ZL1 extractor because the ZL1 hood has the cutout made for it.

Vette TPI · 01-07-2014, 12:50 PM

Quote:

Originally Posted by Angrybird 12

I am pretty sure the ACS one is the same size as the ZL1 extractor, they sell one for each hood and it's my understanding the only difference is the way they are mounted. The ZL1 hood extractor has mounting points the same as the Factory ZL1 extractor because the ZL1 hood has the cutout made for it.

I agree, I am just wondering the measurements so I know how well it will cover my stock cowl.

stt816 · 01-07-2014, 12:54 PM

Quote:

Originally Posted by Vette TPI

I agree, I am just wondering the measurements so I know how well it will cover my stock cowl.

don't understand why you need to measure, look up acs tl1 and there you go thats what it will look like

http://images-cdn.ecwid.com/images/87523/62069931.jpg

Vette TPI · 01-07-2014, 12:56 PM

Quote:

Originally Posted by stt816

don't understand why you need to measure, look up acs tl1 and there you go thats what it will look like

http://images-cdn.ecwid.com/images/87523/62069931.jpg

Because I don't want to spend $550 dollars on a heat extractor that hang over the sides of my hood cowl.

stt816 · 01-07-2014, 12:57 PM

http://lmgtfy.com/?q=acs+tl1

Vette TPI · 01-07-2014, 12:58 PM

Quote:

Originally Posted by stt816

http://lmgtfy.com/?q=acs+tl1

Thank you, but I have already googled a ZL1 hood extractor on a C4 corvette. No one has done it.

stt816 · 01-07-2014, 01:01 PM

failed to see that you were putting it on your corvette...

Vette TPI · 01-07-2014, 01:06 PM

Quote:

Originally Posted by stt816

failed to see that you were putting it on your corvette...

It's all good!

01-05-2014, 09:25 PM	#1
Vette TPI Drives: 1987 Corvette TPI Join Date: Mar 2012 Location: Littleton Posts: 549	ZL1 Hood Extractor Would someone please measure their Camaro ZL1 "Mohawk" hood extractor on top of the hood and please get me some dimensions in inches? __________________

01-05-2014, 09:58 PM	#2
Vette TPI Drives: 1987 Corvette TPI Join Date: Mar 2012 Location: Littleton Posts: 549	This piece? __________________

01-06-2014, 09:41 AM	#3
Vette TPI Drives: 1987 Corvette TPI Join Date: Mar 2012 Location: Littleton Posts: 549	Bump, I hope I didn't ask for some top secret numbers I just want to measure if it will fit on my hood. I know it will fit a Camaro stock hood, but I don't have one __________________

01-07-2014, 12:11 PM	#6
Vette TPI Drives: 1987 Corvette TPI Join Date: Mar 2012 Location: Littleton Posts: 549	Haha so many views and no replies? It would take less than five minutes. Can someone please just take a quick measurement? __________________

01-07-2014, 12:22 PM	#7
Angrybird 12 7 year Cancer Survivor! Drives: 17 Cruze RS, 07 G6 GT, 99 Astro Join Date: Dec 2007 Location: East Tennessee Posts: 21,547	I am pretty sure the ACS one is the same size as the ZL1 extractor, they sell one for each hood and it's my understanding the only difference is the way they are mounted. The ZL1 hood extractor has mounting points the same as the Factory ZL1 extractor because the ZL1 hood has the cutout made for it. __________________ Cancer's a bitch! Enjoy life while you can! LIVE, LOVE, DRIVE... The Bird is the word!

01-06-2014, 11:11 AM	#4
Matt@510 Account Suspended Drives: c6 vette cam & full bolt-ons Join Date: May 2013 Location: houston Posts: 239	im not sure that piece from acs is exactly the same size as gm unit. you could call acs and see what the dimensions are. are you planning on putting the heat extractor on a c4? that might be cool.

01-07-2014, 12:57 PM	#11
stt816 Drives: 2012 Black 2SS/RS M6 Join Date: Mar 2012 Location: Stamford, Connecticut Posts: 672	http://lmgtfy.com/?q=acs+tl1

01-07-2014, 01:01 PM	#13
stt816 Drives: 2012 Black 2SS/RS M6 Join Date: Mar 2012 Location: Stamford, Connecticut Posts: 672	failed to see that you were putting it on your corvette...