12-01-2011, 04:13 PM | #1 |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
SOLD!!! Polished Maggie TVS2300
SOLD.
I've decided to go to a twin turbo set up, so I'm selling my polished Maggie TVS2300. It will be off the car next week. The Maggie is one year old and has about 3500 miles on it. The injectors have about 2000 miles on them and were installed this past spring (with my cam). It works perfectly. It comes with upgraded injectors (65# injectors - the stock Maggie kit comes with 58# injectors). I also have 2 upgraded pulleys - a 3.6" and a 3.4" (I do not have the 3.8" pulley that is in the stock kit). The belt that will come with the Maggie is for the 3.4" pulley and is only 4 month old and has about 1500 miles on it. I'm asking $6500 shipped (Continental U.S.) for the TVS2300, the upgraded injectors, the 2 pulleys, AND I'll throw in the Tech FX heater hose relocation kit. If you want to call IPS Motorsports and ask them about it (they installed it), they will attest to how I take care of my car and that it is in perfect condition. The Maggie is all wrapped up and ready to ship. Last edited by Darth_Emma; 01-07-2012 at 12:47 PM. |
12-03-2011, 07:15 AM | #2 |
雪の玉
Drives: '22 Z71 RST Silverado Join Date: Feb 2011
Location: South
Posts: 3,415
|
Good luck with the sale Emma.
|
12-03-2011, 12:41 PM | #3 |
Don't Like it? Suggit.
|
Emma!!! Why you sellin??
__________________
"Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp |
12-03-2011, 12:47 PM | #4 |
knows 2 facts about ducks
Drives: ...and they're both wrong Join Date: Aug 2009
Location: The HMS Invincible
Posts: 25,072
|
Someone hasn't visited her build thread recently. She's going TT
|
12-03-2011, 12:51 PM | #5 |
|
what is the heater relocation kit. why is it necessary I'm starting to put in my own maggy and wondering if I might need yours. thanks
|
12-03-2011, 01:00 PM | #6 |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
The heater hoses on the stock engine run over the top of the engine. You can't do that when the maggie is in the car. The relocation kit runs the heater hoses along the passenger side of then engine. It looks much cleaner this way too.
Last edited by Darth_Emma; 12-06-2011 at 09:43 PM. |
12-03-2011, 01:01 PM | #7 |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
|
12-06-2011, 09:41 PM | #8 |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
I'll throw in the heater hose relocation kit too!
Last edited by Darth_Emma; 12-09-2011 at 06:27 PM. |
12-07-2011, 07:19 PM | #9 | |
Don't Like it? Suggit.
|
Quote:
Sure wish I had the cash.
__________________
"Tops off, tach up baby- loud and proud!" A Camaro lover from day one- 1996 3.8 V6 Camaro, to 1996 5.7 LT1 Camaro Z28, to the sold 2002 5.7 LS1 Camaro SS, and NOW, a [I]6.2 L99 VR 2SS/RS: XS Power stainless full exhaust, Airaid CAI, BMR drop springs and sways, custom tune by Cal Speed- 411rwhp |
|
12-07-2011, 07:32 PM | #10 |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
|
12-08-2011, 07:37 PM | #11 |
OFF THE CHAIN
|
If you have the Maggie kit the hose relocation is part of it, so if you did, you have it. If you bought it used you will definitely need it if it didn't come with it!
|
12-09-2011, 10:20 AM | #12 |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
|
12-09-2011, 10:29 AM | #13 |
need....more....hp
Drives: The Neighbor Hater Join Date: Dec 2010
Location: San Mateo, CA
Posts: 4,091
|
your going twins now too?!?!?!? I just switched over from the maggie....your going to have a blast! IPS' kit is really well designed
__________________
Mast Motorsports Built LS3 Stroker 418, IPS GT35R Twin Turbos, Exedy GTO4XD Twin Disc Clutch, Aeromotive A1000 Eliminator Stealth Fuel Pump, AEM Meth Injection, DSS 1400hp Axels, BC Coilovers, Pfadt & BMR Suspension, Hawk HPS Pads, Drilled/Slotted Rotors, Hurst Shifter, Custom Roll Cage by Blu808, T3 Ports, 22" Custom Concave Mesh Rims |
12-09-2011, 12:59 PM | #14 |
Psssssssssshhhhhhhhhhhhh!
Drives: under contruction Join Date: Nov 2009
Location: Marysville, Ohio
Posts: 12,996
|
|
|
|
|
|
Similar Threads | ||||
Thread | Thread Starter | Forum | Replies | Last Post |
CAMARO WIKI | Tran | Wiki | 66 | 04-22-2024 11:41 AM |
Can I nstall a Maggie TVS2300 without Headers? | speed racer | Forced Induction - V8 | 6 | 06-22-2010 05:30 PM |
Installed Maggie TVS2300 | Barton Industries | Forced Induction - V8 | 26 | 03-06-2010 09:05 PM |
ENGINE COVER "SS" WHITE EMBLEM & POLISHED STAINLESS NAMEPLATE | Kirban Performance | V8 Bolt-Ons & Tunes | 0 | 03-04-2010 12:45 PM |
how much weight does the TVS2300 Maggie add? | 600hp-lpe | Forced Induction - V8 | 2 | 09-27-2009 10:52 PM |