05-08-2014, 04:01 PM | #141 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Hey guys check out Hood Build Thread from ERIC at MPD here...Getting close to final production!!
http://www.camaro5.com/forums/showthread.php?t=357388 |
05-10-2014, 03:47 PM | #142 |
SoCal HT5 COTW 12/16/2013
|
Awesome stuff! and the hood
|
05-12-2014, 09:35 PM | #143 |
Drives: 2012 2SS/RS Join Date: Jul 2012
Location: Central IL
Posts: 901
|
Hows the splitter holding up?
__________________
My Build thread! http://www.camaro5.com/forums/showthread.php?t=317027
|
05-12-2014, 09:43 PM | #144 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Holding up great with zero issues!! Had it up passed 100 and just as secure as ever. We used all the screws under neath and proven to be good decision. Haven't had any issues bottoming out and car already extremely low. Sent from my iPhone using Tapatalk |
05-20-2014, 04:01 PM | #145 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Couple of more photos of hood build approaching final completion.
Sent from my iPhone using Tapatalk |
05-20-2014, 04:38 PM | #146 |
Drives: 2013 Black Camaro 2SS/RS Convert. Join Date: Jun 2013
Location: Sauk Village, Illinois
Posts: 506
|
Your hood is the same as my showstopper hood minus the hex vents. Whipple will look good in her new home
__________________
2013 Camaro 2SS/RS-Smoked tail lights and side markers, HID log lights, & LED lighting inside/outside the car, SJM LED Cupholder, SJM full dashboard ABL lighting, ZL1 Rockers, 1LE Splitter, Showstopper LED Mirrors, Showstopper LED Side Markers, & Showstopper Heat Extractor Hood, 20" Niche Concourse ZL1 Styled wheels 20X8.5 & 20X10 with 275/40/20 & 315/35/20 Nitto Invos, Black Gorilla Lug Nuts/Locks, Black Billet Elite Camaro License Plate Holder, and Hydro Dipped Speedo/Shifter/AC-Heat Bezels.
Last edited by Cool AirZ28; 05-20-2014 at 04:39 PM. Reason: spelling error |
05-20-2014, 04:55 PM | #147 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Cool airZ28 very similar but yet slightly different. :-) The front vents are being modified to have different lines along with different mesh. Eric has done a great job re creating requests. Looking forward to having painted and installed
Sent from my iPhone using Tapatalk |
05-26-2014, 09:46 PM | #148 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
After work tonight had idea to add some rear foot well lighting...Took all of about 15 min or so to install while watching TV. Took back seat out all of about 2 min. Had some extra RGB strips lying around with zip ties. Secured into place under each sitting area.
Will finish connect to night owl system this weekend. Wonderful think about night owl can control the brightness or match other LEDs or ambient lighting. Options are endless. I also put an led strip in my trunk area for ambient glow at car shows. With night owl can give trunk breath effect with slow color change for added factor at night shows. On last photo turned down brightness down a but on green. Red is my primary color. Sent from my iPhone using Tapatalk |
05-26-2014, 10:45 PM | #149 |
I keep hearing nothing but praise about the Nightowl system. Had no idea you could adjust the brightness too! Gonna have to give them a look.
Sent from my SAMSUNG-SGH-I337 using Tapatalk
__________________
2010 Camaro 2SS/RS | RotoFab CAI | ARH 1 7/8" LT Headers w/ HFC | SW Retro Exhaust | ZL1 Shifter | Ridetech Coilovers | FE4 conversion | UMI toe rods & trailing arms | Prothane Subframe & UCA bushings | Detroit Speed sways | Forgestar F14 wheels | ZR1 Blue Calipers | Tuned by ADM Performance SSeric's Build Thread |
|
05-27-2014, 11:09 AM | #150 | |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Quote:
I laughed at Cfest this year. Tons of guys using Chinease made controllers and not Night Owl had issues with other people controllering there lights. With Night Owl its a secure system which only YOU control. |
|
06-05-2014, 06:49 PM | #151 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Having hood installed tomorrow for fitting. Will be driving for couple of days to allow to settle and paint Monday or Tues.
Here is some added photos for the gallery... Sent from my iPhone using Tapatalk |
06-06-2014, 09:44 AM | #152 |
700RWHP-650TQ
Drives: 2011 Forged LS3 Supercharged/Cammed Join Date: Aug 2010
Location: Shrewsbury Massachusetts
Posts: 5,269
|
Looks Great!!
__________________
View Build HERE>>>>>MY 2011 2SS/RS JOURNAL |
06-24-2014, 10:29 AM | #153 |
Drives: 2010 IOM Camaro Join Date: Aug 2012
Location: DFW
Posts: 3,112
|
Finally!! CamaroI Build Thread Begins!! IOM Camaro [COTW 2/10/14]
Small update. Car at the body shop having new hood installed and painted. Shop also painted strut towers and front fascia area. On 2010 models they left areas painted flat which always looked unfinished. Much better now glossy.
Sent from my iPhone using Tapatalk |
06-24-2014, 10:43 AM | #154 |
DAP-ONE [COTW - 12/23/13]
|
Looks good, dude!
__________________
|
|
|
|
|