How to properly install Defenderworx bowties! - Camaro5 Chevy Camaro Forum / Camaro ZL1, SS and V6 Forums

Downwithopp · 10-02-2009, 09:41 AM

What is the actual process to installing the Defenderworx bowties? I found a couple guides online about how to remove the stock ones, but the ones that I got have just the tape on the back, with no pins.

Any help would be much appreciated.

Defenderworx · 10-02-2009, 10:26 AM

For the Front, reach behind the grill and pop the bowtie out by pushing the brackets through the grill towards you. Use a flat screwdriver and pop the gold piece from chrome. Replace the Gold with the replacement bowtie, and pop back in to the slots. For the Rear, take a drill and slowly drill a hole in the center of the gold bowtie on the back. Take a pick and pop the Gold piece out from the chrome backing. Replace the Gold with the replacement bowtie and you should be all set.

If you have any issues, please call Brian at DefenderWorx @ 714-630-9700. He has done this process over 50 times.

Downwithopp · 10-02-2009, 10:49 AM

Beautiful, exactly what I needed. Thanks a ton!

Defenderworx · 10-02-2009, 10:59 AM

No problem. If you come across any hurdles, just call Brian. He can help...Post pictures when you get them installed....

10-02-2009, 09:41 AM	#1
Downwithopp Drives: 2010 Black SS Join Date: Sep 2009 Location: San Francisco, CA Posts: 352	How to properly install Defenderworx bowties! What is the actual process to installing the Defenderworx bowties? I found a couple guides online about how to remove the stock ones, but the ones that I got have just the tape on the back, with no pins. Any help would be much appreciated.

10-02-2009, 10:26 AM	#2
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	For the Front, reach behind the grill and pop the bowtie out by pushing the brackets through the grill towards you. Use a flat screwdriver and pop the gold piece from chrome. Replace the Gold with the replacement bowtie, and pop back in to the slots. For the Rear, take a drill and slowly drill a hole in the center of the gold bowtie on the back. Take a pick and pop the Gold piece out from the chrome backing. Replace the Gold with the replacement bowtie and you should be all set. If you have any issues, please call Brian at DefenderWorx @ 714-630-9700. He has done this process over 50 times. __________________

10-02-2009, 10:59 AM	#4
Defenderworx Accessory Guru Drives: 2010 Chevrolet Camaro Join Date: May 2009 Location: Anaheim, Ca Posts: 516 View My Garage	No problem. If you come across any hurdles, just call Brian. He can help...Post pictures when you get them installed.... __________________

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
DIY : Install underdrive pulley on 2010 Camaro SS	Nine Ball	Camaro DIY & HOW-TO instructions & discussions	34	09-30-2013 08:25 PM
DefenderWorx or anyone who knows install...	GRM RPR	Cosmetics and Lighting Modification Discussions	18	10-29-2010 12:21 AM
Will my dealer install bowties?	G.E.	Cosmetics and Lighting Modification Discussions	2	08-20-2009 10:07 PM
Defenderworx bowties available NOW!	Camaroyoung	Cosmetics and Lighting Modification Discussions	26	07-30-2009 11:38 AM
Defenderworx blacked out Bowties	sigma_1966	Cosmetics and Lighting Modification Discussions	48	07-23-2009 08:22 AM

10-02-2009, 10:49 AM	#3
Downwithopp Drives: 2010 Black SS Join Date: Sep 2009 Location: San Francisco, CA Posts: 352	Beautiful, exactly what I needed. Thanks a ton!